Watch the all-new Warrior 12" swing blade sawmill thump through some deep cuts in poplar.
Пікірлер
Thank you for the video. I would love to see start to finish. Setup included.
@wendellbell61643 жыл бұрын
Good saw mill but how do you cut a big log on slope of about 35 degree with the turbor saw mill?
@amirkamola6003 жыл бұрын
It would be nice to see you from arrival thru set up and pack up
@darroneasoneason7256 жыл бұрын
The setup was gonna be my comment. It looks like a great saw , but if it takes hrs to set it up especially out on a hot day that would be bad. I know they aren't as mobile but the swing blades that are set up on a log bunk like a band mill just seems more user friendly or at least a lot more simple.
@coburnlowman5 жыл бұрын
How does this mill physically (lifetime wear) compare to the Lucas mill?
@johnsmith-iu1dv3 жыл бұрын
I have a 10inch blade on my sawmill auto worrior can it replace with a 12inch blade
@navwinwells3765 жыл бұрын
I cant stop imagine if i have one ..how much
@donnylanting24623 жыл бұрын
Cuanto cuesta esa maquina Precio por fabor
@evitalayme40644 жыл бұрын
If I understand rightly, you could then with a double cut get a beam 24 inches by what ever the tree can provide? If I am correct this machine would make one great beam and post producing machine!
@scarmenl6 жыл бұрын
scarmenl yes that’s correct
@TURBOSAWMILL6 жыл бұрын
How much. Can you get in Canada 🇨🇦
@Johnrider12343 жыл бұрын
i had an image of my MIL there for a minute...........
@SuperLooneyrooney5 жыл бұрын
Não tem como eu saber o PREÇO é como posso compra
@adeiltondeca86805 жыл бұрын
ok I see all the different blade mills but one thing they don't tell you is how you level off the log . I see the bunkers on the ground but how does the saw make level cuts if its high on one end an lower on other what if ground isn't level . please explain
@danbooger16 жыл бұрын
Dan butcher as every cut is equal to the previous. There is no need to have it level. It only needs to be aligned to the centre of the log before you start as a once of alignment. We don’t turn the log so your requirement isn’t necessary.
@TURBOSAWMILL6 жыл бұрын
ok but if the log is high on one end then the other end when the saw blade goes through the wouldn't be lets say 2x6 on one end an 2 x4 on other end if log was 2" lower or does the blade float
@danbooger16 жыл бұрын
Dan butcher not really understanding you. Blade certainly doesn’t float. The other end of the beam has a one off adjustment to align the saw to the log before milling begins. Everything is then sawn parallel until the end.
@TURBOSAWMILL6 жыл бұрын
So basically you level the beam to the log not the other way around?
@TheCrazycatfisher6 жыл бұрын
The board is parrellel or straight to the saw blade, not the log. So the boards will be straight and uniform so long as the log doesn't move.
@travishanson1666 жыл бұрын
Boa noite como a diquiri esa maquina
@moisesluiz52435 жыл бұрын
can I get a link to this equipment because I can not find it on the site?
@pedoberyyy62265 жыл бұрын
PeDoberYyy just click on the automated link on our website.
@TURBOSAWMILL5 жыл бұрын
@@TURBOSAWMILL the price
@opheliaeghan22044 жыл бұрын
Where can I buy one of these saws and what is the approximate price of one like this?
@1982MCI6 жыл бұрын
The only not answered question.
@smwrbd5 жыл бұрын
This model starts at Australian $27000 and goes to $62000
@jarrodoreilly43284 жыл бұрын
What is the price of this mill
@phildeborahpound54404 жыл бұрын
After the first cut it was a bit samey, good bit of kit though.
@H4rleyBoy3 жыл бұрын
quanto custa essa máquina e qual a largura máxima ela serra
@adairbiasi9623 жыл бұрын
WOW
@larrycounce45093 жыл бұрын
Cutting reverse order, cut horizontal then vertical
@jimwilson48254 жыл бұрын
Nyan bereih
@sapii95994 жыл бұрын
Как работает автоматическое перемещение пилы?!
@user-ow5zk8lf1k3 жыл бұрын
black poplar?
@dennisbinyon90236 жыл бұрын
Yep
@TURBOSAWMILL6 жыл бұрын
TURBOSAWMILL цена
@user-rf3hw9ru7s5 жыл бұрын
Je voudrais avoir des infos pour l'achat
@shadustdadu23474 жыл бұрын
why dont they cut the bottom at twice the depth? would be able to drop the board better would it not?
@dale27785 жыл бұрын
dale you can do all sorts with the swingblade but no real advantage going deeper in the horizontal cut.
@TURBOSAWMILL5 жыл бұрын
@@TURBOSAWMILL what indian prise
@shajuindianprisewhatplease4874 жыл бұрын
Price please
@arifbacchus79605 жыл бұрын
Found at www.turbosawmill.com
@TURBOSAWMILL4 жыл бұрын
Boys and girls can anyone tell me how he can cut 24" slabs no problem ?
@thomasbrenes66195 жыл бұрын
Thomas Brenes The guard swings up or is removed to enable a horizontal cut on the left of the log (right side of blade) and a horizontal cut or back cut on right of the log (left side of the blade). This is done in the horizontal orientation.
Thank you for the video. I would love to see start to finish. Setup included.
Good saw mill but how do you cut a big log on slope of about 35 degree with the turbor saw mill?
It would be nice to see you from arrival thru set up and pack up
The setup was gonna be my comment. It looks like a great saw , but if it takes hrs to set it up especially out on a hot day that would be bad. I know they aren't as mobile but the swing blades that are set up on a log bunk like a band mill just seems more user friendly or at least a lot more simple.
How does this mill physically (lifetime wear) compare to the Lucas mill?
I have a 10inch blade on my sawmill auto worrior can it replace with a 12inch blade
I cant stop imagine if i have one ..how much
Cuanto cuesta esa maquina Precio por fabor
If I understand rightly, you could then with a double cut get a beam 24 inches by what ever the tree can provide? If I am correct this machine would make one great beam and post producing machine!
scarmenl yes that’s correct
How much. Can you get in Canada 🇨🇦
i had an image of my MIL there for a minute...........
Não tem como eu saber o PREÇO é como posso compra
ok I see all the different blade mills but one thing they don't tell you is how you level off the log . I see the bunkers on the ground but how does the saw make level cuts if its high on one end an lower on other what if ground isn't level . please explain
Dan butcher as every cut is equal to the previous. There is no need to have it level. It only needs to be aligned to the centre of the log before you start as a once of alignment. We don’t turn the log so your requirement isn’t necessary.
ok but if the log is high on one end then the other end when the saw blade goes through the wouldn't be lets say 2x6 on one end an 2 x4 on other end if log was 2" lower or does the blade float
Dan butcher not really understanding you. Blade certainly doesn’t float. The other end of the beam has a one off adjustment to align the saw to the log before milling begins. Everything is then sawn parallel until the end.
So basically you level the beam to the log not the other way around?
The board is parrellel or straight to the saw blade, not the log. So the boards will be straight and uniform so long as the log doesn't move.
Boa noite como a diquiri esa maquina
can I get a link to this equipment because I can not find it on the site?
PeDoberYyy just click on the automated link on our website.
@@TURBOSAWMILL the price
Where can I buy one of these saws and what is the approximate price of one like this?
The only not answered question.
This model starts at Australian $27000 and goes to $62000
What is the price of this mill
After the first cut it was a bit samey, good bit of kit though.
quanto custa essa máquina e qual a largura máxima ela serra
WOW
Cutting reverse order, cut horizontal then vertical
Nyan bereih
Как работает автоматическое перемещение пилы?!
black poplar?
Yep
TURBOSAWMILL цена
Je voudrais avoir des infos pour l'achat
why dont they cut the bottom at twice the depth? would be able to drop the board better would it not?
dale you can do all sorts with the swingblade but no real advantage going deeper in the horizontal cut.
@@TURBOSAWMILL what indian prise
Price please
Found at www.turbosawmill.com
Boys and girls can anyone tell me how he can cut 24" slabs no problem ?
Thomas Brenes The guard swings up or is removed to enable a horizontal cut on the left of the log (right side of blade) and a horizontal cut or back cut on right of the log (left side of the blade). This is done in the horizontal orientation.