KZhead

Buying my first TIG welder - Unimig Razor 200 AC/DC

AHE Industries
2023 ж. 12 Шіл.
3 873 Рет қаралды
Жүктеу

I have always wanted a TIG welder since high school. I finally bit the bullet and purchased one. Now the learning begins!

Пікірлер

  • I really enjoyed the tig welding learning curve. Do yourself a favour though and get a bit of plate for your bench to weld on and attach your earth to that. The more comfortable you are the better your weld will be.

    @peatergriffin@peatergriffin2 ай бұрын

    • Definitely mate, I have that steel bench to the right of my normal one which I could set up on. If I get serious on a project I probably would. I am still just pottering here and there with it. I am probably using it once a month so not too much!

      @aheindustries@aheindustries2 ай бұрын

  • hope you have the ground and torch hooked up correctly for A/C. It should be torch hooked up to Negative and clamp to positive

    @aaronmurakami1120@aaronmurakami11209 ай бұрын

    • Sure do!

      @aheindustries@aheindustries7 ай бұрын

  • good stuff mate every body starts somewhere.

    @rambom161@rambom1617 ай бұрын

    • Thanks mate!

      @aheindustries@aheindustries4 ай бұрын

  • Nice job for your first go, it's a big learning curve to get your head a round, so they say. Did you get a D size bottle or an E size ?. I am looking at buying the same tig and then comes the fun part. All the best, Cheers

    @rsbharley4766@rsbharley47667 ай бұрын

    • Thanks mate, I use the E size bottles. May even go the G next time round hey. The good thing now you don't have to pay the monthly rent on bottles so may as well go the biggest so it means less swap overs.

      @aheindustries@aheindustries7 ай бұрын

    • Thanks for the reply mate, much appreciated. Have a great weekend, Cheers from West Oz. @@aheindustries

      @rsbharley4766@rsbharley47667 ай бұрын

    • @@rsbharley4766 Best place to be mate!

      @aheindustries@aheindustries7 ай бұрын

  • alsao you should watch some videos on how to tig weld it is not easy and that is how i learned it ius a steep learning curve but definately take some time to watch some videos and do some reading first Then try your hand at it once you have kind of learned somwe theory and also learned how to set it up. and don't worry about filler right away learn how to makw a puddle first then worry about filler later. Just some small tips to get you started. if you want to self tweach do some research first

    @aaronmurakami1120@aaronmurakami11209 ай бұрын
KZhead