Head to squarespace.com/forge to save 10% off your first purchase of a website or domain using code FORGE.
Giveaway link: asteeleblock.com
OUR PRODUCTS: alecsteeleco.com/
INSTAGRAM: / alecsteele
ALECSTEELECO KZhead: bit.ly/alecsteelecoYT
ALECSTEELECO INSTAGRAM: / alecsteeleco
LEARN BLACKSMITHING ONLINE: beginblacksmithing.com/
PATREON: / alecsteele
Instagrams:
Alec: @alecsteele
Jamie: @jamie.popple
My name is Alec Steele and I am a 24 year old blacksmith. We make videos about making interesting things, learning about craft and appreciating the joy of creativity. Great to have you here following along!
If you want to get into blacksmithing or knifemaking, check out our Montana based online store where we stock a range of great metalworking equipment for these crafts as well as our work-wear line and other products: alecsteeleco.com/
Thank you for watching!
Alec
/ alecsteele
INSTAGRAM @alecsteele
FACEBOOK PAGE / alecsteeleblacksmith
MUSIC:
Epidemic Sound - goo.gl/iThmfx
-signing up at this link supports the show!
SoundStripe soundstripe.com?fpr=alec84
- signing up at this link supports the show!
MUSIC - goo.gl/iThmfx signing up at this link supports the show!
------------------------------------------------
AMAZON AFFILIATE LINKS TO GEAR I LIKE, buying here supports us:
--------------
CAMERA + MAIN LENS: amzn.to/2CrLyYP
WIDE LENS: amzn.to/2CsAZou
TRIPOD: amzn.to/2GpBX7f
MIC: amzn.to/2CrBmiQ
SD CARD: amzn.to/2sF0i7g
COMPUTER: amzn.to/2C4i0oo
Alec Steele Blacksmith 2022
Props to the mill for holding up. Having that anvil on the end with the table fully run out must have been an enormous load.
Good thing Jamie stopped him and he didn’t flip and drop it there
I thought the same sir. That was alot on the end if the table.
@@jonasschindzielorz Yeah, that was a yelling at the screen moment. Both for the damage it would potentially due to his hands as well as the mill table.
RIP to the ways on that mill 🫗
Bridge ports can hold 480 lbs, roughly
As much as I’d like to have an anvil I think your idea to send it to a school is where it belongs!
Better still if he showed how it was originally used, before giving it away, by making a saw with it.
I cant imagine schools would use it, too much health & safety
@@wadkin1973 national school of blacksmithing exists in the UK.
Was gifted a 80 ish lb anvil and an ASO from a fellow veteran for the build out of my new to work shop. Goal is to have veterans and first responders over for hammer ins. If I can help one person win their battle with PTSD it’ll be worth it. Hats off Alec and crew for what you’re doing
As a vet and first responder, this is much appreciated
Whilst they were probably used for large handsaws as well, these anvils were largely used for the tensioning of large circular saws and wide band saws during manufacture and maintenance by a "Saw Doctor" which sounds like a ridiculous job title but was actually a very skilled profession at one point in time. They also had their own specialist hammers, the more common ones were the "Doghead" style which were pretty much a one-sided hammer with all the weight on one side, and then you had "Twisthead" style which had opposing diagonal peins on each side of the hammer and another style was the "Crossface" which had a vertical pein on one side and a point on the other. The hammers would be used to pein and bring tension into the saw plate by expansion of the metal in certain spots where it was required which is what made the saw blade rigid and less likely to whip and warp when running at several thousand feet per minute at the rim.
We have an antique tractor show with a very large circular saw blade and there's still a few guys that know the art. Have to hammer the stresses for a certain RPM to get it to stabilize. Really cool stuff.
I'm an apprentice Saw Doctor at a steel mill in Australia. Its a dying art, but there are still a couple of us out there. We use an anvil similar to this for circular saw blades anywhere between 630mm and 2m in diameter.
@@blksrsil That's very cool! Do you have to go to a college to learn the trade also or is it purely a "on-the-job" apprenticeship? It's only something I've ever seen in the old books I have on the subject from well over 60 years ago.
I'm actually a trained sawsmith and have my own set (handed down to me by my mentor) including a dog head and others, if he ever wanted to see them/use them
Still a crictal skillset today but very hard to find even 24" vlades we run for an upcut saw can have a shimmy at full speed and hammer tensioning gets rid of that. Most of the saw mills for lumber have someone for there 3 and 4 foot dia blades
Jamie casually absolutely saved your bridgeport table
Alex, slow your RPM down on that big cutter. The tips will last longer . I’ve noticed you run it too fast on other videos . With a large diameter cutter like that you could go down to about 150-180 rpm. On softer steel like stainless or mild you can take a 2mm cut and the cutter and work piece will not over heat .
id argue that 218 rpm with half of it as feed rate was the best if he had the correct inserts for such hard steel, then he should start with 0.5 mm dept of cut and incrasing until he see that the machine isnt strong enough to that, but with such small machine i doubt he can go more than 1 mm even if such inserts can have an ap of 8 probably regardless such inserts are not made to make sparks only high nickel alloys should do that
I've told him so many times to consider cutting fluid, and, he just doesn't have time for that, rather eating through tools. He acknowledges that though in jest, so these are (new) old bad habits creeping in. Thank overnight tool deliveries exist.
@@stevenwest1494you shouldn’t need coolant with properly tuned feeds and speeds, the chips should take away most of the heat.
@@stevenwest1494 To be fair, for this kind of use, as in milling hardened steel with carbide inserts. You shouldn't use cooling, at least not in the amounts you could get on there with this kind of setup. The thermal shock of repeatedly heating and cooling will destroy the inserts. The only way that might work is if you can flood the whole tool with ungodly amounts of cooling emulsion, and you'll never achieve that on an old, open machine.
When the goal is video content, there needs to be sparks and some level of destruction. Tool life and surface finish are secondary.
That "I told you so" was so satisfying.
Can you create a 2 man sawblade first? Would be an interesting topic with exhausting testing afterwards :P
It was nice bumping into you last night mate. You're welcome back to my petrol station any time.
You can hear how solid that anvil is.
Man the bottle opener video was so good! Another challenge video like that would be good fun
Alec does his best Captain America imitation: "It appears to run on some form of electricity!"
I like that you don't just give it away to anyone, but try to make sure it is actually being used and will be part of lived history. Restoring old machines and equipment is my favorite content of yours. Please do more of this :)
That anvil has a NICE deep sound. I love it.
I honestly knew the Bridgeport would give out. That poor 2 horsepower motor just can’t handle a very big depth of cut. Ideally you’d want too use the giant Cincinnati milling machine Jason has that he used to cut Wills anvil because it has a 50 horse power spindle.
Unfortunately that machine is 5000 miles away.
A Sturdimill has a 7.5HP spindle motor and there are plenty of those around.
This kid is an Amateur and Has No idea how to "Properly" operate Machine tools I pray he wont get Hurt doing things that he shouldnt ...
Your excitement for blacksmithing, be it the craft or the tools of the craft, is infectious. It does suck that the anvil sales never truly took off. It would've been cool to own one
Man that would be so awesome to see that anvil given to a subscriber. I took the leap and started learning how to forge knives about 8 months ago and it had been difficult for me to find a decent anvil anywhere near me.
I love any and all the anvil content from you guys! love that you restored one. love that you are giving it away.
I would absolutely love if that anvil went to a school. I don't even want to apply because I hope it goes into the continued education of future smiths! It is a craft very much worth keeping alive and beating!
I have one of these in my workshop and I absolutely love it! It has really great response due to the mass. I have another anvil with a round and a square horn for when I need it, but when I want to move metal I definitely prefer the sawmakers anvil. Armourers anvils were often designed in a similar way.
Great music during the milling. Had a small rave whilst watching. Enjoyed the slowmo sparks as well👏
Hope all is well! Have a great rest of your day (whoever is reading this).
Those clips of the milling were really satisfying. Probably the most satisfying I’ve seen here.
love this so much. Restoring it to be used as a perpetual piece of living history is absolutely the way.
Okay but does anyone else think Alec's voice was actually really good in that "I told you so" bit?
Worked on the exact same anvil for 23 years! Loved it
Is it true thr sawyer anvils are softer
Oi Alec. You need Ruwag drill bits and Harden tools. Lemme hook you up.
You did a hell of a good job restoring that anvil love your videos
Great video! Amazing idea on the giveaway! Hope a local school is the recipient!
That's a impressive job. From scrap metal to fully functioning and ready to work.
Jamie has saved your ass more than once !!! You know that, right ?
I love the random camshaft on the shelf of the welding table 😂😂 1:55
👀
👀👀 something you’re not telling us? Lol.
I would suggest rounding the corners of the mounting plate or they will draw blood.
I love the idea of gifting and regifting as the craft is learned.
Really cool anvil. GJ as always
its awesome that you are giving that away to a good home, im sure someone will make great use of it.
What!? No ball bearing test? Sadness. You are a patron of the arts and a fine fellow to boot!
Possibly the most entering 1 min of KZhead I've seen in a while, Alec Spazzing out over a blown/ tripped fuse. Keep up the Good work!
Jamie is my new hero.
I really like the bolt holes. Great addition.
The use of anvils for saws was not limited to cross cut saws, in fact they were of limited use in that venue. They were more commonly used for putting the tension in the center of larger circle saws, which require a slight dishing in order to run true when they run up to speed.
I’m glad that someone made this comment. A sawyers anvil would typically be set up under a large circular saw that was set on a turntable laying in the horizontal position. The saw blade would just ride over the anvil so that the sawyer could hammer on the blade to adjust it into true. And, they typically had a slight crown to the anvil face, not truly flat. That way the sawyer could focus the energy from the hammer in one precise place on the blade.
man , thats a huge efford , the precision , the finish and the finesse, all those parts wire brushed you certainly moved up a level here !
I was recently at a metal recycling center to get a few bucks for some junky old useless metal parts but while I was there I saw a Bridgeport Mill standing up in the junk pile and it was fairly complete from what I could see of it it. It was depressing seeing a beautiful old machine like that standing there crying out to be restored and used but actually about to be destroyed. I'm moving across several states and don't have anywhere to go with such a large tool but if I did I would have ask the main office about it.
Surely it can't be legal to have this much fun.
Wow I'm view number 2 , wild. Long time subscriber. Love the content
I signed up for your classes a while ago. I haven't to date done anything. BUT! I finally got myself to a place where i will be able to build my shop again in about a year, hopefully less. I would love that anvil or one like it. It looked like you really liked that one. Plus, how great would it be to learn on a piece of history like that. I wonder what stories it would tell if it could.
Love anvil restorations! Hope it goes to good use.
The BEST "I told you so!!" EVER!!
We need to see Will in the UK for a Steele vs Stelter.
Please Alec. With your platform and connections, find the facing tools. The grinders that draw down the spine of the saw to a few thou shy of the cutting teeth thickness. Speaking for myself and few others. No one can recreate these techniques today with modern representation of large saws I can source anywhere. God bless and stay true sir.
Jamie sprayed the tool as requested... The tool using the tap. :P
ROFL I see what you did there🤣
Great video! I’m glad you’re giving it away but honestly I wish you would keep it and use it, to show people that work can be done with a simple block of steel
Bravo super restauration!
I believe Ilya uses a style of sawyers anvil as his main @thatworks?
That was crackin. Good show old man!
There is a place in Oxfordshire that is trying to maintain the old school skills easily lost in time, such as blacksmithing and I'm hoping to help them. i can't offer my full time to the cause but i think this is a strong if not the best candidate for this new anvil's new home. I'd be happy to share the story with you and hopefully you can get on board with maintaing the history of blacksmithing in the uk
Some information about saw makers anvils. They have an ever so slight crown. Just a few thousandths in the middle. They are also used for leveling and tensioning circle saws more so than the old misery whips.
6:45 karaoke stream when? 😂 This was a super restoration, and it's good to hear you are giving it away to somewhere that needs it. 👍
Awesome job sir. Can't wait to see more updates an projects and many more videos soon my friend. Keep up the great craftsmanship and hard work my friend. Forge On. Fab On. Weld On. Keep forge lit. Keep Making. God Bless.
Alec should make one of those two-man logging saws
He should visit Thomas Flinn in Sheffield the last traditional sawmaker in the UK and the last company in the world to make two man crosscut saws
Yea, that's a great idea
Was that rather a lot of weight for the bridgeport?😮
My great grandfather was a saw maker as well as a lumber jack. When he passed away all that knowledge and his tools never got passed on. I would have loved to have seen and used his tools and sit and listen to his wisdom filled stories.
Absolutely fascinating
Not the most consistent viewer of Alec Steele, but I saw a giant anvil in the thumbnail and knew I had to watch it 👍
When I built my own shop, not a professional one, just a space for tinkering, working/ hanging out etc) I expected to occasionally have to move heavy things around without any help. I put 3/4 inch eyebolts through several of the 6 inch by 12 inch overhead beams, all the way through, with a nut and a few thick washers on the topside. I also build an extra stout dolly on the strongest casters I could find. With the aid of a block and tackle hooked to the eyebolt this lets me hoist very heavy things out of my truck bed and lower them onto the dolly to be moved about. My own anvil is only 65 lb, but I've used this set up to move a huge cast iron woodstove and an appliance or two.
absolutely incredible, can we all appreciate the effortless skill here, my amoeba brain cant comprehend some of the thought processes needed to do something like this. brilliant
Oh Yeah!!! Thanks Alec!!!
Thanks for filming Alec. 😁👍🏼😁👍🏼
What an amazing piece of English History
Absolutely great idea.
That a cool anvil!!
Jamie givin that real advice
I wish he had side shield glasses on around the mill.
Sisterhood of the traveling anvil
I could use that anvil as a leg rest under my desk! Thanks!
Oh I watched the whole video only to hear the words “In the UK” 🤠 Once it’s on the boat it doesn’t matter how far it goes! Nice anvil. Hard work for the Bridgeport!
Nice project!
You should make some damascus fishing lures. I know you have Pike in England, so you could make some daredevils or something like that
I go to a training facility called derwent training in malton North Yorkshire anvils n blacksmithing tools wouldn't be much use but any other fabrication/machining tools if u are ever giving anything away I'm sure they would have them. They are a training facility as apposed to a collage so they don't make money so any tools/equipment has to be given to them or fund raised for. Just thought I'd put it out there.
Nice anvil and great was to pass a part of the past to a younger generation. Stay safe.
the voice of wisdom from behind the camera. youre not just gonna do that are you, of course its gonna go wrong, what are you doing?!
Sawyers‘ anvils are great for bladesmithing. I‘d keep it if I were you.
So, that whole top is sheffield cast steel? How much do you think that anvil cost back in the day?
My grandpa & I have a long running joke… every time I get up there to him I ask for his anvil. He always says “Over my dead body”… I respond “Well keep it forever then”🖤
I like it when Alec says the words then he goes bam and hits the metal
The slo-mo and up close right before the bridge port broke 😮😮😮…I could watch that for hours
Oh boy! I could too! And I need the name of that song, if anyone got it!
best squarespace advert i have ever seen
Alec: "SFM what is that?" Lol keep up the good work guys.
Mad my 1st anvil from rail iron.Drilled hardy with 1/2" drill and a good file.Wore out my angle grinder squaring face and shaping the horn.Rings loud and annoys the neighbors.Nice job on your restore job.Hopefully it finds the right home !And sees alot of hot iron and hammers! Keep up the good work Yall!
i was given 2 crusty rusty anvils had a lot of success using a scotch bright pad on an angle grinder to clean em up. the wire wheel was taking a longggg time to do the same job
Saw setting The surface of the anvil is usually convex and not straight. They have the correct tension set on the circular saw blades. 🎅🏻👍🏻🇫🇮
I recently got in to hitting steel with a hammer. Using a railroad track and chain welded to it. I can see now why a heavy anvil is preferred. You lose so much energy in to the ground with a light anvil! Let’s hope a school gets in on this.
Jamie, TOP MAN for removing the anvil and flipping it over. 150kg on a max traveled out table, you could have Seriously damaged it.
Youre the Mr Beast of anvils and Tools, just giving them out to those who needs them
@AlecSteele they also were used for smaller saws like handsaws and backsaws which on the premium side had tapered blades to make them not bind in the kerf
What a great idea boys. Well done. The whole video concept, use of Squarespace, the moral usecase for the anvil ...
Alec's singing voice, wow, that's a belter of a voice XD
My favorite project on this channel was the Damascus pear of anquish
Was hoping to see you try and make a saw with it haha oh well great restoration video 👍
Oh and also why didn’t you put your tape into one of the collets to start it off ?