Custom Exhaust £10 DIY Brabus inspired sport exhaust for Smart Car W450 Fortwo
2020 ж. 22 Ақп.
49 375 Рет қаралды
In this very unproffessional video we drill into our rear exhaust silencer and weld on a sport exhaust tip. Although this seems a complete bodge we did study the design of the rear exhaust silencer and apply at least 2 minutes of careful thought into where to drill the hole.
Love your mad scientist way of customisation keep up the videos
You are correct ,in the cars you mentioned , disconnecting the battery will erase radio code,however on the smart 450 you can go to settings and turn code off ,so when you disconnect battery ,it won't ask you for a code ,which I found useful as I am doing a lot of electrical work on mine . Anyway,after our comments ,the video uploaded has confirmed that he will block off the original end pipe .In my opinion ,that's why he got all that white smoke on start up .
Must say that put a smile on my face, picked up a cheap 02 Smart last week cos the RRS is waiting for a slot to get the compressor replaced, I think i will pick up a couple of exhaust ends and make a Brabus style one... Thanks for the insight and ideas....
Good luck ... they are a hoot to drive...remember you have to wave at other Smart drivers..... weird but you get used to it !
Very nice 👍 love your all new video and new ideas 💡
Bit of theme going on with " loud exhausts " 👍 I really think you would make an excellent high school teacher metal work or science teacher actually I even think my science teacher had the same jumper ! I wish I had half of your enthusiasm you even make exhausts sound interesting ! Great channel. ☺👍
I had a great DT ( design and technology ) teacher at school and it is actually one thing i have always fancied doing...
@@L663 It's never too late ! 😊 you're only in your late twenties early thirties now 😉 !
After watching your video I decided to alter my Roadster with 2 38mm dia pipes in the centre section angled downwards to miss the valance - nice sound and more torque :) Also blanked the original pipe....
Hi Howard - i am glad our crazy idea has inspired you....
@@L663 Hi. Could not fund the crazy prices for ''sports'' exhaust. Now I can hear the exhaust :)
SEMPLICEMENTE GENIALE, BRAVO!!!!
Bella idea. Proverò sulla mia Smart. Grazie
pure io hahaha ma intendo con tubo a T di fare con doppio scarico hahaha
When the wife has a girls night out and your mate pops over for a beer
Hi love what you did with the exhaust is it ok to keep like that for mot emissions wish you could do stuff to my smart
I look great on you, I would like to connect it to my smart, where did you buy that tail that you welded?
That was a nice job, think I would have took the old tail pipe off though, it looks a bit odd with it still on. 👍
Nicely done and very fast but yes,should have blocked off the original end pipe.Would have better sound and no loss of back pressure
Yes i got a bit excited - yes i will get on and do this
Well, that all worked out well, what is the gizmo you fitted to the battery to save frying the electrics when welding ? With a carpenters claw hammer you can achieve anything ! Chris B.
It's to prevent damage to cars electronics when welding . You can just disconnect the battery ,(even safer)should you not have one
Fernando Azenha.B : Yes I realise it is a device that we can easily do without by disconnecting the battery, however, when the battery is disconnected it sends all the electric services crazy, this little device should avoid that problem.
@@453421abcdefg12345 I think it is just a capacitor but not 100% sure
Didn't see you saying you knew what the device was for ,(did you edit your post?)hence my answer . I have used a similar device (wurth brand)for years .The only advantage over disconnecting the battery is it doesn't reset memories in your cars modules ,like radio ,etc.Its not as safe for welding as disconnecting the battery ,since they been known to fail . Disconnecting the battery will never make your cars electronics do crazy things ..In fact , disconnecting it + joining both cables for a certain time ,is the first action on any service manual ,wherever your cars electronics go crazy by themselves.
Fernando Azenha.B : In my haste to ask the question I neglected to indicate that I knew what the devices purpose was, I was really interested in knowing where one could be acquired, the problem I have had when disconnecting some vehicle batteries is that the radio fails to recognise the security code when powered up again, with something like a Range Rover that is packed with computers and other "delicate" electronic bits I am a bit reluctant to shut down the power, although last time I changed the battery there was no problem at all, I didn't even need to input a security code. Chris B.
should be cutted the tail so when the air pass trough one hole the sound become more clear
Hi, well nice job! I'm thinkin about doing that on a 451 non-turbo, will lost in performance? And seems not so louder than original, it is? I'm just addicted to BB look but i don't want to make it louder than original one or also drive a slower smart... Thank you for helping btw, really nice job!
Will LOSE performance, sorry for my poor english i'm italian :)
@@Eldiablo_FPV You will not loose any performance - if anything you gain performance ! The exhaust is a little louder but more it is a change of tone rather any louder
Turn auto subtitles on and go back to the opening line in the video 😂😂😂😂
Classic..
ma e in regola fare una cosa cosi e girare ?
13:02
Do you guys know why the heck my smart 450 is smoking and eats up A LOT of oil? :(((
Mine does the same - not sure of the reason but I do need to check the oil often !
@@L663 yeah same , I have to fill like 1litre per 70km... Or so ...
for muck sake, its the two jonny's!
Nearly but its Simon and George....
Isn't this mod going to make it want to run rich?
Ni - its passed the oxygen sensor so will have no impact on rich running etc
😂
L”
🤨🙄🥴🤦♀
I forgot how cool this was !
WTF YOU ARE DOing?
Having fun !
Che schifezza