KZhead
Тәжірибелік нұсқаулар және стиль

How To Sharpen A Drill Bit Easily | HSS Drill Bit Sharpening

Mistry MakeTool
2023 ж. 4 Жел.
853 692 Рет қаралды
Жүктеу

In this video, I show you how to make a drill bit sharpening jig. This jig is used to sharpen a drill bit very quick and easy. I hope you like this video.
►Subscribe to my channel and don't forget to click the bell 🔔
/ mistrymaketool
Visit My Official Website:
mistrymaketool.com/
Social Media:
Facebook Page: / mistrymaketool
Instagram: / mistry_maketool
Pinterest: / _created
Thanks For Watching...
Hit the Like & Subscribe Button...
#mistrymaketool #diyprojects #sharpendrillbit

Пікірлер

  • I've been a machinist twenty years,I know how to grind a drill by hand on a grinding wheel,it's a art in itself especially big drills,not many people know how to do it.

    @appsstore11@appsstore114 ай бұрын

    • Yeah and you gotta do it regularly to stay in practice. I totally understand the process but never could quite get it right. So after several cheap sharpening gizmos i bought a drill doctor. Which works spectacularly well but only on drilld with a twist rate thats compatible with the indexing method. Those that arent end up just a blob at the end. Those that work look just like new bits, split point and all.

      @batvette@batvette4 ай бұрын

  • Never have I seen a more complicated way 😢

    @marcstubbs581@marcstubbs5814 ай бұрын

  • How to take off a finger. Do not ever hold a piece of metal with your fingers while drilling. Use a vice grip or any other tool. Ask me how I know.

    @kinglangren@kinglangren5 ай бұрын

    • So what your saying is that you can't use your fingers to count to 10. Maybe pull them clod hoppers off & use your toes😅

      @williamguy786@williamguy7864 ай бұрын

  • You left, "easily," behind after the fourth step.

    @brooksrose7881@brooksrose78815 ай бұрын

  • Только не нужно забывать периодически сверло охлаждать, тогда будет вообще ХОРОШО. Привет из Гомеля, Беларусь 🇧🇾

    @Trutko.Dmitry@Trutko.Dmitry5 ай бұрын

    • No sign of any water to cool the work in this video... Of course a good mechanic would know this! 😢

      @Pilgrimm21@Pilgrimm215 ай бұрын

  • 😂😂 30 seconds on a grinding wheel does it, you don't have to build bloody Noahs Ark.

    @colinwood7020@colinwood70205 ай бұрын

    • Some kind of jig does help to get the angle right.

      @batvette@batvette4 ай бұрын

  • As boiler maker I can ensure you this is stupid I only need a bench grinder and if on site a grinder

    @MrAerion@MrAerion5 ай бұрын

  • Most of this was painful to watch. Not that hard to freehand once you learn the geometry of a drill. I find it very relaxing to sit down with good light preferably sun light and a pair of magnifiers on and sharpen 50 in one sitting. If im getting technical I'll use a gauge.

    @keyesfamily1@keyesfamily14 ай бұрын

  • Safety was not present in any part of that demo it was notvdone properly and Noone should follow his lead.

    @bobmackenzie-tq6ij@bobmackenzie-tq6ij5 ай бұрын

  • So I need wood, bench saw, metal, angle grinder or buy a new drill ???

    @dannykirk8705@dannykirk87055 ай бұрын

  • I give it a bit more angle and definitely a back relief. Some ofy best drill bits. Kinda gives it a step up

    @Craneopsss@Craneopsss5 ай бұрын

  • I hold it free hand and sharpen

    @glennbogan@glennbogan5 ай бұрын

  • Still waiting for the easy part

    @meva8@meva84 ай бұрын

  • I just use an ANGLE grider, Put the drill bit an a clamp angle myself and sharpen, my bit works really great after and that's it really......

    @walcottdion5821@walcottdion58214 ай бұрын

  • Wow! The idea is so great, congratulations

    @Alotipsalo@Alotipsalo25 күн бұрын

  • You have a talent my friend please continue to show simple ways to achieve mundane tasks. 👍🏻👍🏻

    @markharris6078@markharris6078Ай бұрын

  • I do the samething at work. But I don't need a block of wood and all that jazz. I just hold it up to a grinder. Use 2 nuts for a guide. Give it back relief....voila! Done!

    @crazycarlneb@crazycarlneb4 ай бұрын

  • The chips instead of a drill a spiral piece demonstrates a drill bit sharpened off center. Not east, not good results

    @jameswilkinson1713@jameswilkinson17135 ай бұрын

  • It seems that the art of sharpening drill bits on a bench grinderhas been lost.

    @jamiem3115@jamiem31154 ай бұрын

  • Would be much easier to buy a new one. That was a huge time expense.

    @ekaram63@ekaram635 ай бұрын

  • that looks really easy 😂

    @hairyboy315@hairyboy3154 ай бұрын

  • Might of never been told this but... you're one sharp guy.

    @danielmiller9894@danielmiller98945 ай бұрын

  • Think easier and faster, I will go buy a new one!!

    @blumexcolombia7921@blumexcolombia79215 ай бұрын

  • Love your enginuity and DIY skills! If you're looking for a new idea or challenge... I would love to see if you could design a "pruning shears" attachement for a cordless drill(!?) Happy Holidays / Merry Christmas!

    @__WJK__@__WJK__4 ай бұрын

  • How to sqharpen a wood flat bit?

    @googleisntrespectingprivac6772@googleisntrespectingprivac67725 ай бұрын

  • Agreed with first comment, however injeneral good idear. One point however don't ever put metal any were near a sanding disk it will catch the wood dust alight on the bottom side, perfect tinder 😮

    @tobykirkby7754@tobykirkby77544 ай бұрын

    • 🤔😂🤣

      @tdotw77@tdotw774 ай бұрын

  • Animo...👍.

    @arnolbipolaris4986@arnolbipolaris49865 ай бұрын

  • Yes sir!! Nice in a pinch but needs to be split point especially in steel.

    @visionmach@visionmach4 ай бұрын

  • Its amazing man 😮

    @aniketsutar100@aniketsutar1005 ай бұрын

  • Why not just use and angle grinder with a grinding disc and sharpen at different angles?!

    @osmanaboobaker7024@osmanaboobaker70245 ай бұрын

  • Sharpening a drill bit properly really isn't that hard. But that's not it. Look at the small chips. The bit is going to overheat in no time at all. Once you learn the basics you don't need any jigs or angle finders. Freehand. Been doing it since high school, when they taught you real world information

    @garysickler2179@garysickler21794 ай бұрын

  • What ever happened to the Drill Doctor for sharpening?

    @michael184272@michael1842724 ай бұрын

  • Why was the demo with a different drill bit ?????

    @keithjames9654@keithjames96545 ай бұрын

  • ❤❤❤❤

    @ramilrelucano1591@ramilrelucano15915 ай бұрын

  • I would just use a grinding wheel if need be. If I'm in the shop i just use the thirty dollar drill doctor though lol time is money

    @christophershoemaker8848@christophershoemaker88484 ай бұрын

  • Good work

    @ranchhodsuthar8383@ranchhodsuthar83835 ай бұрын

  • Lmao, did I miss the “easy” part? Just go buy a new bit, if you’re using this week long project method of sharpening a drill bit…

    @jakesnyder9342@jakesnyder93425 ай бұрын

  • We have dramatically different definitions of "easily". They make drill bit sharpeners. Cheaply would have been a descriptor.

    @JohnnyPolasik@JohnnyPolasik4 ай бұрын

    • That wasn't even cheaply, as he needed a power saw, file, drill, drill bit (ironic), tap, screwdriver and disc sander..

      @martinevans4002@martinevans40024 ай бұрын

  • So for a 4 dollar drill I'm out an hour.... Really good video, but not the play for me homie!

    @khayrobs@khayrobs5 ай бұрын

  • Too much bull crap involved. Go buy a drill doctor and get it done quickly. Or simply throw out that dull bit and buy a new one.

    @kenkrauklis765@kenkrauklis7655 ай бұрын

  • Give me a grinding wheel and I can sharpen in about 30 seconds. A lot of wasted time. Good try

    @albertstrong5516@albertstrong55165 ай бұрын

  • Tool box lakdi ka kitne ka hai

    @RIHAN755@RIHAN7553 ай бұрын

  • You didn't explain in what position the drill bit has to be clamped. I refer in terms of rotation.

    @zbigniewrichard8291@zbigniewrichard829116 күн бұрын

  • Or get a new bit,whichever is easyer

    @michaelwild4810@michaelwild48104 ай бұрын

  • I am confused. Is hands not sufficient to sharpen it with sharpner, why use that wood tighten tool? Is it necessary??

    @Lionking-tl5nv@Lionking-tl5nv4 ай бұрын

  • Buena idea

    @albertcebriariu4469@albertcebriariu44695 ай бұрын

  • Which country are you from

    @anchorpanasonic9253@anchorpanasonic92535 ай бұрын

  • If ya wanna lose a few fingers, follow his lead....

    @MrHitchikerOz@MrHitchikerOz5 ай бұрын

    • Please he got this!

      @danielmiller9894@danielmiller98945 ай бұрын

  • who has all this equipment and time to do all this to sharpen a drill bit

    @billyfred4985@billyfred49854 ай бұрын

  • He didn't grind any relief on the back side of each facet. That drill will make 2 holes, and then burn, losing the temper. If you don't understand what I have said, don't bother with this nonsense, just buy a new drill!

    @Pilgrimm21@Pilgrimm215 ай бұрын

    • i agree, both the first and second part of your comment

      @jeghedderhenrik@jeghedderhenrik5 ай бұрын

    • @@jeghedderhenrik There's a right way, and a wrong way! If you can't do it right, don't try to be a teacher! (Thanks for your support!)

      @Pilgrimm21@Pilgrimm215 ай бұрын

    • ​@@Pilgrimm21KZhead is full of hacks grifters and frauds, but sometimes you'll find a real expert teaching everything for free. I love KZhead but beginners need to be very careful.

      @drengr2759@drengr27595 ай бұрын

    • I agree if u grind d back down just a bit it will cut longer

      @glennbogan@glennbogan5 ай бұрын

    • You may have the right idea, but your advice is pretty much just as bad as the dude making the video. Why would you buy a new drill when all you need is a new bit?

      @cflin4637@cflin46374 ай бұрын

  • I'd g-clamp that piece down mate or it'll catch you out one day!

    @ZENERVOLTAGE@ZENERVOLTAGE5 ай бұрын

  • What a lot of fuss and work. It would have been quicker and cheaper to buy a new drill.

    @royleon3525@royleon35254 ай бұрын

  • My friend, you are an amateur. You simply don't know how to sharpen a drill bit, under what angle depending on the metal you want to drill. Only amateurs will sharpen a drill bit on the side of the grinder stone. In this case the drill bit will be sharpen innequally coz a bigger amount of metal will be polished from the right side of the drill bit compared with a smaller amount of metal polished on the left side. More than that, you haven't polished that drill bit on its back, that drill bit will cut 3 or 4 holes and then it will get burned. You better learn more and only then try to post here.

    @danalexandroaie3233@danalexandroaie32335 ай бұрын

  • it's really great. i had a problem drilling steel. maybe you have some answers? there's a 5mm thick general-purpose steel that I had trouble drilling. With a new drill bit, after just 2 drillings, the bit loses its shape. Even when I change the drill bit, nothing happens. I can't drill any more.

    @bricesaw2013@bricesaw20135 ай бұрын

    • Get better bits and dont let them get too hot. Use a lubricating oil, drill a bit and stop when it starts smoking, wait let cool and then drill some more.

      @earnwithbots2783@earnwithbots27835 ай бұрын

    • Coz you don't know how to sharpen a drill bit. You simply don't need that device coz using that device will prevent you rolling the drill bit in order to sharpen it properly. Read a book where a professional sharpen of a drill bit is described, than take that drill bit, make it straight and then sharpen it again, following those explanations. Anyway, the drill bit must be sharpened on the frontal side of the grinder stone, not on its side. Also take care to cool that drill bit in water periodically. Good luck!

      @danalexandroaie3233@danalexandroaie32335 ай бұрын

    • Hey Dana lexan... I thought the same, BUT, on watching more closely you have to notice the cutting edge of the bit is vertical while fastened in the jig. Some audio to explain this might be necessary for first timers. I also sharpen mine by hand on the front of a grinding stone wheel. However this is a sanding pad and it's being used correctly.

      @sgiavy5244@sgiavy52445 ай бұрын

  • Wait, he needed a sharp drill bit in order to sharpen a drill bit?! 🤣 I'm sorry but I would just go out and buy a cheap little bit sharpening kit and call it a day.

    @Charny27@Charny275 ай бұрын

  • Please sharpen your saw blade.

    @BazzMann48@BazzMann484 ай бұрын

  • He is desplaying a lot of scrap instead of getting straight to the point

    @walterrobertrajagopaul4434@walterrobertrajagopaul44344 ай бұрын

  • This is easy? Ok, if you say so.

    @donamills@donamills5 ай бұрын

  • Cool but not very easy

    @andyt1573@andyt15735 ай бұрын

  • 😂….ok good luck with that.

    @grntitan1@grntitan15 ай бұрын

  • Stop ..Just put it on your bench top grinder, you'll be finished in under a minute..

    @nickradan1977@nickradan19774 ай бұрын

  • Your joking right. We just freehand sharpen drills on a bench grinder. You can use a scale to get flutes the same or you can buy drill sharpener guage. You can also relieve the backside. Get some experience and you'll be able to sharpen drills without making all that up.

    @user-qy5ci2lf5i@user-qy5ci2lf5i4 ай бұрын

  • If you know how to, jig is pointless. And with this instruction loads of people will make scribes from drill bits 😅

    @robertdrelich8668@robertdrelich86685 ай бұрын

  • You have to be kidding me… All that work just hold the drillbit up to a grinder?

    @MAgaSUXX@MAgaSUXX4 ай бұрын

  • NOTHING ABOUT THIS SAYS EASY TO ME

    @NUT_SLAPPER@NUT_SLAPPER4 ай бұрын

  • I can sharpen by hand better lol drill was chipping swarf worst example of sharp drill I’ve ever seen!!!

    @davidlindsay93@davidlindsay934 ай бұрын

  • How is this easy lol

    @MrAerion@MrAerion5 ай бұрын

  • How about the bit that is used for the "sharpened" test is NOT the one he supposedly sharpened 😂😂😂 It's a larger size and WAYYYYY shorter than the one he supposedly sharpened. Just saying!

    @texasslowhand1771@texasslowhand17714 ай бұрын

  • I can do it better free hand. This is the hard way.

    @Ethan-ci8vc@Ethan-ci8vc5 ай бұрын

  • No thanks. I will just buy a sharpening machine

    @yohantambatamba@yohantambatamba13 күн бұрын

  • All that for a £1 buy 😂😂😂😂

    @user-hw5ph8jy5s@user-hw5ph8jy5s4 ай бұрын

  • My my what a total waste of time.....

    @frankp8854@frankp88544 ай бұрын

  • Bullst

    @ronasayaman9197@ronasayaman91974 ай бұрын

  • Don't follow this ! This is not the way and will be off-center

    @hondogame6412@hondogame64124 ай бұрын

  • Cheaper to go buy one with all that effort

    @neil4981dd@neil4981dd5 ай бұрын

  • Your saw needs a new blade

    @1941392@19413924 ай бұрын
KZhead