Project 0118 | Making a Spot welding machine
The Make it Extreme creation with the number 0118 is a very powerful Spot Welding machine. It is a very useful tool for welding iron plates and various other structures!
► Click HERE to subscribe to Make it Extreme: bit.ly/MakeitExtreme
► Second Channel: bit.ly/MakeitExtremeShorts
• Get the Plan: bit.ly/MIEplans
• All details: bit.ly/320ZJmW
• Help us on patreon: bit.ly/MIEpatreon
Welding Machine:
• Mig: bit.ly/Rallymig
• Tig: bit.ly/PITIG
----------------------------------------------------------
AMAZON AFFILIATE LINKS:
-------------
►Tools in this video:
Engineers Squares Set: amzn.to/3N6JE54
25FT Tape Measure: amzn.to/3hcUBDH
Mitutoyo 500-197-30: amzn.to/3sZwXQB
Marking Tool: amzn.to/3Ig0SdX
Welding Magnets: amzn.to/3JRATJU
Digital Angle Gauge: amzn.to/3h9MojF
Heavy Duty C Clamp: amzn.to/3BZ2uGJ
Center Punch Set: amzn.to/3hcWDnj
Jobber Drill Set: amzn.to/3HgsYo3
Multicolor L-Key Set: amzn.to/3t2Xxsb
Countersink bits: amzn.to/3sci2mT
Magnetic Drilling Cutter Kit: amzn.to/3HdsKy0
Camera Nikon D7500: amzn.to/3sot7l0
Useful Tools we recommend: amzn.to/3Ii2ljF
Lathe/Milling Parts: amzn.to/33JjDqX
Makita Tools: amzn.to/3t0eOSR
Videography: amzn.to/3H8jaMM
Our PC: amzn.to/3Hexljo
►Check our Storefront:
www.amazon.com/shop/makeitext...
-------------------------------------------------------------------
Social Media:
• Facebook: bit.ly/Makeitextreme
• Instagram: bit.ly/makeitextreme
• Special Thanks to our Patrons:
✔TOP Patron: [Devin Bauste]
New Patrons: Robert Allor, Krisztián Csempesz, Daniel, Adam Hamdan Adam, Julio C. Leite, Joep Koenen, Ilyas Keddani, Hayden Stowell, Younes Ait Loutou, Sammy Muriuki, David, Bruce Mansfield, Robert Stewart-Taylor, Sebastian Benjamin, Bojan Miljevic, Elvar Arason
• Playlist for all videos: bit.ly/2gZL4Dg
• Intro Design: vimeo.com/90149001
#makeitextreme #spotwelder #weldingmachine
What's up guys! If you interesting to get the plans for our projects it's available on patreon page. Link: www.patreon.com/makeitextreme/
how much would cost one of this??
Sir plz show us how to design soap stamping machine especially stamping molds
Hello sir, can you make oxygen concentrator or liquid oxygen generator with household things..if you could ,it will help many people in emergency situation and save their lives...thank you.
Είμαι εδώ από το σχόλιό σου στο βίντεο του Μάνου
Zl) skf de la fllfdzzclzzlfzf
This is the heaviest diy welder I have ever seen on KZhead so far . Amazing
Those finishing touches of the side grates, rounded corners, sleek handles. That's what really puts this above other DIY spot welders. Looks awesome!
Thank you for this wonderful work
You just know when Make It Extreme uploads a video its gonna be something EPIC, and this is EPIC work again guys, I hope you both never stop and continue to make art and mechanical marvels from Cyprus!!
epical
If you're form Cyprus do you know Greek ξέρεις ελληνικά εστο και λίγα;
Μόνο ελληνικά μιλάμε! :)
Ορέως :)
yep ,, i am a fan of them for a long time, i like to make, but life doesn't allow🙂
Wow! Very nice build, looks good too and even has a simple but effective variable timer.
Saludos desde COLOMBIA...hay que reconocer que eres un Gran Mecánico ...de verdad excelente maquina la que has Construido....mis Sinceras Felicitaciones...vos sos u duro en lo que haces....
Привет из Ростова-на-Дону. Ребята, Вы настоящие профи. Всегда приятно смотреть Ваши работы. Желаю удачи и благополучия.
Они не знают Русский язык.
@@pollipopo думаю поэтому и молчат всё видео))))
Zhat might be the most Professional made diy spotwelder that scares me brutally
Very good, but I would like to see the electric schematics.
It truly is an awesome design. However if you want to see another homemade spot welder, check out Dan Gelbarts version, which is also seriously cool: kzhead.info/sun/a5aCmdBonXiEbJE/bejne.html
yes, drilling and tapping several holes right into the iron core is so professional that not even the shadiest chinese-made spot welder would dare to do that...
@@AKAtheA Atleast one other person with electrical knowledge around here
@@olivervoss3196 Enlighten me. The holes make the transformer less effective and less efficient because the path for the magnetic flux is disturbed. But as long as the result still works it should be ok, right? Am I overlooking a hazard that's created by the holes?
This thing is 10x better then store-bought one. Epic video and epic build. Subscribed instantly.
good..♥building for easy and simple. thank,syou teacher.
perfect.the spotwelder so it's supposed to be. excellent work that deserves congratulations.
I love that you take apart so many microwaves that you have a dedicated punch to get the copper leads out of the transformers.
Спасибо за идею. Повторил, практически, один в один. Работает, но быстро нагревается. Thanks for the idea. Did almost one on one. Works but heats up quickly.
Great build. Thanks for sharing.
Just love that every episode just gets better and better. This is not just some garage hacks. This is fabrication for real! 👍😀
You know, every diy spot welder video has a section where they spot weld washers together. This is the first time I've seen the washer flower, props to you . this is a sweet video.
One of the most useful builds... great work !
The way you combined the transformers secondaries with the same cable is a good thanks for the tip
This left me speechless pure dedication wow.
MAKE IT EXTREME SALUDOS CORDIALES DESDE GUAYAQUIL ECUADOR MUY BUEN TRABAJO DE MAQUINA SOLDADURA 🇪🇨🙋♂️
Cool. Add spring to auto open. Great weelding skills
I salute your works...... you are so perfect genius!!
Beautiful, the king of innovation
By god, that's a lot of hefty shop tools for a DIY spot welder!
An artist at work.
Nice toy! I can see somebody enjoyed do in it ........CONGRATULATIONS (I Liked very much seeing the whole process)
Entre los soldadores de punto caseros que he visto es el mejor. Excelente. Felicitaciones!
Sim.
Juste magnifique. Bonne fabrication. Nikel. Its very good job.
Excellent content! Thank you. Rich.
DIY engineering at its best. I'm never going to make any of these things, I just appreciate the craft, ideas and processing.
That was awesome. Thanks for sharing.
Wow! thanks man.
That’s awesome project guys waiting for new one
Симпатичная игрушка получилась!))
Nice job. For your information, you shouldn't have sanded the outside of the transformer. The laminations are insulated from each other to prevent eddied currents in the core and unnecessary heating. By sanding them off they are all most likely shorted together. This is the reason you never see a cast single piece transformer core. It would be cheaper to make then this way, but they wouldn't work very well. Drilling and tapping the cores is also not a good idea. Think about it this way: the current flowing the the transformer core is current that could have been flowing through your wires.
but the microwave transformers are usually welded together, probably because it's cheaper even though it's less eficient
That's only on the surface where they are sanded, so internally there will be little eddy current. Should be ok. It will be noticeable in excessive heat in the core if there's too much eddy current. Nicely pointed out there, it shows you have good observational skills.
Just one word "Awesome"
It looks great!!! I really like the amp control knob.
What a nice build. Best in show!
Εξαιρετικό.Καλύτερα σχεδιασμένο και κατασκευασμένο απο τα περισσότερα ''επαγγελματικά" που πουλιούνται στο εμπόριο.
Very nice❤
What a beautiful job!
One improvement I can see for this, is to have a foot release to free both hands, and not have someone else to open the jaws. Started making one a while ago, but the vids then, had you grind the transformer apart to remove the coil in one go. This way is so much better, as I don't have to work out how to reassemble the transformer casings.
What a machine best homemade spot welder I’ve seen on KZhead by far 🙌🏻 Just wish you guys would upload more often but hey worth the wait Could say this video was spot on 🙌🏻
2 bad it costs as much as commercial unit with all that copper.
@@zumbazumba1 wait until you get all the parts as scrap ... and wait ... and wait ... and wait ... and wait ... and wait ... and wait oh, wtf, who am I kidding? Time is money, too! :D
Fantastic as all the things you do...👏👏👏
You always making fadu project
Замечательный аппарат. Ножное управление удобнее. Всех благ.
Amazing work as always, that is a beast of a machine! Think I preferred the background music from your earlier videos, helped me discover some artists I still listen to.
Όπως πάντα επαγγελματική δουλειά με έμφαση στην λεπτομέρεια. Άντε να δούμε και κατασκευή ηλεκτροκόλλησης σε κάποιο απο τα επόμενα βίντεο.
Very Nice Presentation with Excellent quality of work and extremely good quality of work. Best Video with Fantastic idea ✍️👌👌👍👍💐💐
OUTSTANDING!!!!
I love your jobs .. from indonesia
Is beatifull congratulation
Как всегда круто. Мне понравилось решением с регулировки времени работы. 👍👍👍
Very nice job!
è costruita benissimo bravo , veramente un fai da te che supera un prodotto professionale
Esta brutal ese electro punto excelente trabajo
Wow, looks pretty good to me.
Wow!!!!! Nice invention!!!! Show!🤩🤩🤩🤩🤩🤩🤩
you have an awsome ability to bring thoughts to fruition, the factory ones that I ran had a foot pedal so that you had both hands free to locate the work and then actuate it by foot. But you probably already considered that.
Mine is made with the same principle. I added a foot pedal ( dirt cheap from China) and a relay. It's in plastic housing, though as I don't like the idea of 220 VAC and a secondary with 150-200 A in a metal housing. Works flawless... :)
Сразу видно, что у классного мастера на все руки, поверхностные знания о электричестве, и примение в этой мощнейшей, из - за токопроводящих элементов, установке, в качестве источника сварочного тока - двух дохляков, из микроволновки ,с общей полезной мощностью не более 1 киловатта, вместо использования в этом конструктивно возможном устройстве, с символическими контактными соединениями, возможного источника, в кВт 5, для сварки листов до 5 мм .
Nice job.
Nice work
que buen trabajo hermano, hermosa, lo felicito
That’s a beast great job
السلام عليكم ورحمة الله تعالى و بركاته يا أخي الكريم ما شاء الله تبارك وتعالى الله يبارك فيكم أخي الكريم
First time seeing this channel. You are too smart dude. I think we can all say that this is such an achievement to have this level of skill. Subscribed.
Really cool bit of kit well recycled from some old microwaves. Really like how you have designed the lever system.
super clever!
Very very very well man 👏👏👏👏
Definitly Ill do this build some day (got an old broken microwave oven for this). One thing I should change is how to activate it, use a pedal switch instead so I would have both hands free to hold the pieces and turn it on with my foot. Liked and suscribed!
Ima make this one thankz. This and that vice (hydraulic) ya made a while back are two of yr very best! Ima use the vice i made (of yrs) to hold all the stuff while i weld it. Once again thanks. Oh! I forgot to tell ya.. been a fan for a while now.
Magnifique mieux que sur le commerce 🙀🙀🙀😎👍
super réalisation comme toujours,
Mükemmel bir video!!! AWESOME
Excellent work 👈
whoah... beautiful work all together... wish I had the access to these machines :)
Woww 😲👍👍 Amazing Product 👍👍👍👍 Best Idea
Amazing ideas and skills man. Satisfying to watch :)
Damn...that is a useful idea.
Should have a sticker on it to warn heart pacemaker people to operate this beast! :-D What a beast, great build! :-D
The magnetron (the component that produces the microwave radiation) was not included in the build, so no issues for pacemakers. Otherwise, people with pacemakers would have to stay away from everything that has transformers, especially those humming big green boxes outside.
@@doubledarefan You missed the ":-D" in my comment! :-D
@@horstszibulski19 How dare I miss that. What a shame!
You make everything extreme. 🦾
Maravilloso, genial 👍, gracias saludos.
100% Exellent project gold handmade perfect ***** stars 👌
Хорошая работа МАСТЕРА !!!!! Всем МИРА и добра !!!!
Wow!.Good work.
Always an impressive video. Keep 'm coming
the second transformer was crazy. subbed 👍🏻 just make sure the windings are wound in phase on the different transformers
Spectacular!!
Impressive DIY (extreme) welder.
Another great job .... Green man . You are really creative. 😄🤗👍👍👍
muy buen video.
Damn this is so awesome!
Outstanding
Awesome! For welding nails you need different , specially shaped electrode tips.
It was amazing man!!
My dear love, take this extreme flower in your heart
Excelente!!😮
Excelente, felicitaciones.
Nice work I like it