KZhead

My Homemade Metal Lathe Part 3

INNOVATION TIME
2023 ж. 2 Қыр.
57 515 Рет қаралды
Жүктеу

Welcome to INNOVATION TIME.💐
Hello friends
This is a semi-automatic lathe that X axis has a motor with adjustable speed. In the future will added an electromotor to Y axis and will be completely automatic. The movement of the device can controlled by using a joystick. The main electromotor that rotates the chuck is speed adjustable. This lathe machine is not for sale. I spent about a year to make this lathe and I tried to show you that it is possible to make this tool with minimal facilities. I used scrap metal as much as possible to make this lathe and finally spent about 1500 dollars. This work has been prepared and published in several parts. This video is one of them. To financially support this channel, you can use Super thanks and pay membership. Your support is my encouragement.
Please don't forget to subscribe 👆
yun.ir/1v78ad
Top On Sale Product Recommendations!
CNTD Joystick Switch C2MN-T4 2A2B Monolever Switch Four Directional Reset 2NO 2NC
Click & Buy: s.click.aliexpress.com/e/_olx...
5.5KW 380V 3 Phase 7.5HP Vector Control VFD Variable Frequency Drive Converter Variator for Motor Speed Controller Inverter
Click & Buy: s.click.aliexpress.com/e/_m0q...
VEVOR Metal Mini Lathe Mini Metal Lathe Variable Speed Precision 1100W Machine Small Mechanical Lathe Machine
Click and Buy: s.click.aliexpress.com/e/_ok2...
Playlist:
• my homemade Lathe machine
• Bearing puller
• DIY
If this video helped you out share it with your friends 👉
Part 1: • My Homemade Metal Lath...
Part 2 : • My Homemade Metal Lath...
Part 3 : • My Homemade Metal Lath...

Пікірлер

  • Top On Sale Product Recommendations! VEVOR Metal Mini Lathe Mini Metal Lathe Variable Speed Precision 1100W Machine Small Mechanical Lathe Machine Click and Buy: s.click.aliexpress.com/e/_ok2QzJk

    @innovationtime20@innovationtime20Ай бұрын

  • I would like to see the finish cleaner like grinding the welds smooth and the turned finish on the controls smother but over all its a good job.

    @jamesmiller800@jamesmiller8004 ай бұрын

    • 💐❤️

      @innovationtime20@innovationtime204 ай бұрын

  • I'm impressed that you built a working lathe with nothing more than an angle grinder, a drill, and a stick welder. The machine is a bit crude, but I'm impressed by how much you've been able to do with so little equipment.

    @fernandorosales2418@fernandorosales24186 ай бұрын

    • Thank you dear Fernando 🙏💐

      @innovationtime20@innovationtime206 ай бұрын

  • Totally impressed with your skills and the learning curve is all the challenge you need, awesome! I like all things DIY, this is what I need to make, thanks for the inspiration!

    @TheVersatileMindMedia@TheVersatileMindMedia8 ай бұрын

    • ❤️❤️

      @innovationtime20@innovationtime208 ай бұрын

  • I dont want to nitpick ,but if you want to use it for longer time then you should ad adjustable gibs to cross slides , those gibs are used to set tolerances . As is now it will wear out and it will not hold any tolerances properly and if that happens you can propably use it only as wood lathe ... On other note I like how beafy it is build and that you used conical bearings for spindle ,but please use oil for sliding surfaces eather way oil or machine oil, just some kind that doesnt make it sticky after some time ,if you aply right oil it will move smoother and wear less

    @martinheralt4240@martinheralt42407 ай бұрын

    • Hello, dear Martin You're absolutely right, I'll probably add this in the future so I don't run into trouble. thank you so much 🙏

      @innovationtime20@innovationtime207 ай бұрын

  • Laik garantido my friend tj Brasil

    @joseneriacoemel9825@joseneriacoemel98256 ай бұрын

  • Un verdadero artesano, todo mi respeto para ti y tu equipo, ya que se requiere de muchísima paciencia, para hacer lo que haces, no cualquiera hace un torno de metal desde cero. Muchas felicidades y mucho éxito 👏🏿👏🏿👏🏿👏🏿👏🏿👏🏿👏🏿

    @koyogalarga3587@koyogalarga35878 ай бұрын

    • Thank you my friend 🙏💐💐🙏

      @innovationtime20@innovationtime208 ай бұрын

  • Although i have no clue of what you do, it is satisfying to watch

    @nargessayah4186@nargessayah41868 ай бұрын

  • ما شاء الله كنت عن حسن ضني الان تعمل جيدا

    @user-ws6jg6rf7v@user-ws6jg6rf7v6 ай бұрын

    • 🙏❤️

      @innovationtime20@innovationtime205 ай бұрын

  • Your project is awesome.. High level work. 🎉

    @mempadunex9693@mempadunex96936 ай бұрын

    • Thanks a lot 😊

      @innovationtime20@innovationtime206 ай бұрын

  • Some things are best left to professionals and this ain't them.

    @AutodidactEngineer@AutodidactEngineer6 ай бұрын

  • CONGRATULATIONS ! You are a genious.

    @kidbolas4007@kidbolas40075 ай бұрын

    • Thanks 👍❤️

      @innovationtime20@innovationtime205 ай бұрын

  • شكرا لك... عمل راءع....حياك الله و رعاك.

    @NorBenz-fz3sn@NorBenz-fz3sn5 ай бұрын

    • Thanks 👍

      @innovationtime20@innovationtime205 ай бұрын

  • Muito bom . Parabéns pelo belo serviço 👏👏

    8 ай бұрын

    • Thanks 👍

      @innovationtime20@innovationtime208 ай бұрын

    • thanks

      @mezanijan894@mezanijan8947 ай бұрын

  • Parabéns ficou top 👏

    @silvanpassos7663@silvanpassos76638 ай бұрын

    • ❤️❤️

      @innovationtime20@innovationtime208 ай бұрын

  • very amizing thank you very much for this video😍🤩

    @Hassen78@Hassen788 ай бұрын

    • 🙏🙏

      @innovationtime20@innovationtime208 ай бұрын

  • La placa sin duda te la mereces 💯 Buenos videos 👍

    @jesusfajardo2778@jesusfajardo27788 ай бұрын

    • Thanks bro 👍

      @innovationtime20@innovationtime208 ай бұрын

  • Great job!

    @gmendes1831@gmendes18318 ай бұрын

    • Thanks!

      @innovationtime20@innovationtime208 ай бұрын

  • thank u man ..u is a steel boss

    @chettia100@chettia1008 ай бұрын

    • Thanks 🙏

      @innovationtime20@innovationtime208 ай бұрын

  • Very innovative. Well done

    @123suzukisamurai@123suzukisamurai4 ай бұрын

    • ❤️

      @innovationtime20@innovationtime204 ай бұрын

  • Very nice work

    @aymanayman7963@aymanayman79638 ай бұрын

    • Thanks 👍

      @innovationtime20@innovationtime208 ай бұрын

  • Very impressive

    @jeffreyboatright6919@jeffreyboatright69197 ай бұрын

    • ❤️

      @innovationtime20@innovationtime207 ай бұрын

  • Very nice tankhyou

    @vahidtaherkhani921@vahidtaherkhani9217 ай бұрын

    • Thanks 👍

      @innovationtime20@innovationtime207 ай бұрын

  • Good job bro👍👌

    @didinsuharto7058@didinsuharto70588 ай бұрын

    • Thanks ✌️

      @innovationtime20@innovationtime208 ай бұрын

  • Làm thế nào mà dùng biến tần bạn có thể tiện răng theo như ý mình vậy. Nó rất tuyệt vời. Mong bạn chia sẻ về điều đó

    @phuochungnguyen4221@phuochungnguyen42218 ай бұрын

    • Both inverters must receive commands from the same place and an encoder must be used so that the time delay does not occur😉

      @innovationtime20@innovationtime208 ай бұрын

  • Ignore the haters, you've done well.

    @michaelsimpson9779@michaelsimpson97796 ай бұрын

    • Thanks 🙏💐

      @innovationtime20@innovationtime206 ай бұрын

  • Boa tarde meu amigo tudo bem? Sou aqui do Brasil gostei muito do seu trabalho e o torno que fez.Pderia você me passar uma lista de material que usou pra fazer o torno completo? Te agradeço Deus te abençoe sempre.

    @ivairivair6756@ivairivair67567 ай бұрын

    • Hello my friend Thank you so much 🙏 I will write a list in video description 😉

      @innovationtime20@innovationtime207 ай бұрын

  • You need a give strip and screws in the cross slide.

    @hampopper3150@hampopper31508 ай бұрын

    • 👍

      @innovationtime20@innovationtime208 ай бұрын

  • سلام حاجی دمت گرم ویدیو عالی بود ولی ای کاش آون گیره ش رو هم دست ساز میساختی 👏👏👏

    @miladgorogchi1416@miladgorogchi14168 ай бұрын

    • سلام، مرسی داداش منظورت قلم گیره؟ اونو هم دستی ساختم توی ویدیو پارت ۲ هست.😉

      @innovationtime20@innovationtime208 ай бұрын

    • @@innovationtime20 شرمنده منظورم سه نظام بود

      @miladgorogchi1416@miladgorogchi14168 ай бұрын

    • 👍 اون کار سختیه ، فرز میخواد که من ندارم 😉

      @innovationtime20@innovationtime208 ай бұрын

  • Buenas noches el precio de el torno gracias le saludo de Guatemala

    @FranciscoJerez-uz1vb@FranciscoJerez-uz1vbАй бұрын

    • Hello my friend It is not for selling but the link another kind lathe for selling is in description 💐

      @innovationtime20@innovationtime20Ай бұрын

  • Parcerito excelente video, pero tengo una duda, ese controlador sirve para hacer todo tipo de rosca o es sólo para velocidad. Y como haces la rosca agradezco tu respuesta saludos desde colombia

    @haroldpatino9811@haroldpatino98114 ай бұрын

    • Thanks 👍 I can control the speeds and the ratio between speed's. It mean I can make any thread 😉 I don't understand the second question

      @innovationtime20@innovationtime204 ай бұрын

  • سلام من مهدی هستم از ایران درود بر شما بسیار عالی بود فقط اگر امکان داره درباره سیستم رزوه توضیح بدید با تشکر

    @atenayousefi9503@atenayousefi95036 ай бұрын

    • سلام مهدی جان ممنونم خیلی ساده ، دوتا موتور(یکی برای سه نظام، یکی برای محور طولی) که هر کدوم یک درایو دارن. حالا اگه هر دو درایو از یکجا فرمان چپگرد و راستگرد بگیرن میشه هر رزوه ای رو زد، فقط کافیه سرعت ها رو تغییر بدید تا گام رزوه عوض بشه 😉

      @innovationtime20@innovationtime206 ай бұрын

  • What's the name of the device you use for speed control??

    @reyn_mechanic896@reyn_mechanic8968 ай бұрын

    • Hi The name is Drive or Inverter

      @innovationtime20@innovationtime208 ай бұрын

  • Sir, can explain for me: you used same joystick switch for spindle and X axis when threading? Can make other videos preparing for threading, I see you make 2 pitch like how ratio of pulley spindle, ratio of gearmotor X axis; how rpm of spindle, rpm of X axis; how pitch of lead screw,... ?

    @95machine29@95machine298 ай бұрын

    • Hello my friend I used two inverters, one for the x-axis and one for the Chuck, both of them can be controlled by a joystick. When the fixed chuck motor speed , any pitch can be created by changing the X-axis motor speed, and I found different pitches by trial and error. 😉

      @innovationtime20@innovationtime208 ай бұрын

    • Of course, it is better to use an encoder so that no errors are made

      @innovationtime20@innovationtime208 ай бұрын

    • good explain but can share me deep information for what device use with encoder for control pitch, on VFD not port for encoder or how use encoder, any...@@innovationtime20

      @95machine29@95machine298 ай бұрын

  • Pliese making blok honing machine

    @sultanshaikh2839@sultanshaikh28393 ай бұрын

  • Soy de Peru, donde puedo adquirir un torno asi, y cuanto me cuesta

    @eduanlorenzosanchezmendoza9685@eduanlorenzosanchezmendoza96856 ай бұрын

    • Hi I don't know my friend But I show tou how you can make it 👍 I spent about 1500 dollar for it

      @innovationtime20@innovationtime206 ай бұрын

  • Olá vc tem pra vender

    @sidneimattos6116@sidneimattos61166 ай бұрын

    • Unfortunately not ❤️

      @innovationtime20@innovationtime206 ай бұрын

  • Can make a build sheet and sell it?

    @yehudaegert2276@yehudaegert22762 ай бұрын

    • 🤔

      @innovationtime20@innovationtime202 ай бұрын

  • Que número de balero conico es

    @fausmartinez6342@fausmartinez63428 ай бұрын

    • The shaft was 70 mm and inside size must be 70 mm and outside is 125 mm

      @innovationtime20@innovationtime208 ай бұрын

  • Xin công thức tính tốc độ để tiện các loại ren

    @clip88th33@clip88th336 ай бұрын

    • 👍 sure

      @innovationtime20@innovationtime206 ай бұрын

  • Hii kw motor ?

    @Gokce_Seramik_Bileme_Taslari@Gokce_Seramik_Bileme_Taslari4 ай бұрын

    • 2.5 kw

      @innovationtime20@innovationtime204 ай бұрын

  • Diagram electrical please

    @mohdmuhaimin8793@mohdmuhaimin87938 ай бұрын

  • C'mon bro, didn't even bother to remove the rust or grind the welds a bit to make them look good before painting.

    @My_Gaming_Mind@My_Gaming_Mind8 ай бұрын

    • Thanks 👍

      @innovationtime20@innovationtime208 ай бұрын

  • Почему поменял подшипники на конические?

    @user-cyka@user-cyka8 ай бұрын

    • He showed why. He was having too much play at the mandrel!

      @christianmusso629@christianmusso6298 ай бұрын

    • ​@@christianmusso629подшипники можно было взять по типу UCF 208 например

      @user-cyka@user-cyka8 ай бұрын

  • Про резьбу без энкодера просто звиздежь.

    @SergeiPetrov@SergeiPetrov8 ай бұрын

    • Thanks 👍

      @innovationtime20@innovationtime208 ай бұрын

  • Awesome build bro. But this video felt rushed and missing large amounts (especially the first 5 minutes, they could've been their own video). Unlike the first 2 which were awesome.

    @yehudaegert2276@yehudaegert22762 ай бұрын

    • Thank you my friend ❤️❤️

      @innovationtime20@innovationtime202 ай бұрын

  • At least clean or grind all the steel plates from the rust or debris before using them. Use oil to smooth the bed ways and all those steel plates that rubbing each other. i can hear squeaky sound while these plates are moving. These steel materials used in this video are not cheap at my place 😢😢😢 However, still a nice DIY lathe ✌✌👍👍

    @wedhuz78@wedhuz787 ай бұрын

    • Thanks 👍

      @innovationtime20@innovationtime207 ай бұрын

  • Hellow friend. Thus is a very nice lathe Especially how you made it and got it to make threads by using VFD,it is the first time I've seen that.can you please show us maybe in a video how you wired those two VFDs together in one joystick to make them able to cut the thread.i would love to try and make one myself if you dont mind

    @allymariachi9230@allymariachi92306 ай бұрын

    • Hello my friend Thanks for your kindness Two motors and two inverters, the question here is how to use left-handed and right-handed at the same time It is enough to control both inverters from the same place, but the problem is that it is not possible to connect both inverters to one joystick. It is enough to put an Electrical Relay for each of the inverters. In this way, both relays can be connected to a joystick. The electrical circuits of the relays are usually drawn on them

      @innovationtime20@innovationtime206 ай бұрын

  • халтура

    @MaksimoV35@MaksimoV356 ай бұрын
KZhead