For those with a q-revo. Taking the bumper off is a little different (we dont have the front panel on the top). Also our bumper sensors are similar just in slightly different positions. I personally super cleaned in there and used canned air to clean out crevices. I also cleaned all of the sensors and the error stopped for me. I will keep the grinding thing in my back pocket just in case.
@mooseBannerАй бұрын
Thank you for making this video. I was annoyed for over a year with my s5 max. Now it is solved!
@remcogiesbertz1577 Жыл бұрын
Top! Deu certo p mim! Obrigado!
@Muris822 ай бұрын
hello. I was in the same situation. and this video solved the problems. I think this method is much better than replacing the bumper sensor. big thank you
@orionroad Жыл бұрын
this problem can be very annoying I'm glad I could help
@laszloizsaki1709 Жыл бұрын
i have this problem but i dont understand what i must sand ??
@ahmdhlwane7140 Жыл бұрын
This is solution of the problem!
@mihailpenev8650 Жыл бұрын
Klo di aplas bs ga ya
@budijuwono442414 күн бұрын
Was in this situation too. First test is running now and looks good! Made it with a knipex.
@thomasproehl Жыл бұрын
Thanx for this advice. I also did it like this now
@remcogiesbertz1577 Жыл бұрын
@@remcogiesbertz1577 Update: Roborock is running without problems since the "fix". But it seems, that he pushes a little bit more against walls.
@thomasproehl Жыл бұрын
Will try it
@zarulasyraf9972 Жыл бұрын
Robot suka error2 knp y
@budijuwono442424 күн бұрын
can you plz explain exactly what to do i didnt understand what to sand plz?
@ahmdhlwane7140 Жыл бұрын
Grind off 3 millimeters of the two small gray sensors that touch the side of the bumper
@laszloizsaki1709 Жыл бұрын
Does anybody test this ?
@lanprom Жыл бұрын
Month ago, I had done the same with mine but I used a small knipex clipper and not an angle grinder. That seems a little bit of an overkill. Do it like I did or use a box cutter. Since then I had no error.
@pebbles4855 Жыл бұрын
Since i did this operation the vacuum works perfectly. An angle grinder seemed to be the most suitable tool for me. But that's not the point, it's the solution to the problem!
For those with a q-revo. Taking the bumper off is a little different (we dont have the front panel on the top). Also our bumper sensors are similar just in slightly different positions. I personally super cleaned in there and used canned air to clean out crevices. I also cleaned all of the sensors and the error stopped for me. I will keep the grinding thing in my back pocket just in case.
Thank you for making this video. I was annoyed for over a year with my s5 max. Now it is solved!
Top! Deu certo p mim! Obrigado!
hello. I was in the same situation. and this video solved the problems. I think this method is much better than replacing the bumper sensor. big thank you
this problem can be very annoying I'm glad I could help
i have this problem but i dont understand what i must sand ??
This is solution of the problem!
Klo di aplas bs ga ya
Was in this situation too. First test is running now and looks good! Made it with a knipex.
Thanx for this advice. I also did it like this now
@@remcogiesbertz1577 Update: Roborock is running without problems since the "fix". But it seems, that he pushes a little bit more against walls.
Will try it
Robot suka error2 knp y
can you plz explain exactly what to do i didnt understand what to sand plz?
Grind off 3 millimeters of the two small gray sensors that touch the side of the bumper
Does anybody test this ?
Month ago, I had done the same with mine but I used a small knipex clipper and not an angle grinder. That seems a little bit of an overkill. Do it like I did or use a box cutter. Since then I had no error.
Since i did this operation the vacuum works perfectly. An angle grinder seemed to be the most suitable tool for me. But that's not the point, it's the solution to the problem!