KZhead

HOW TO TURBO AN E46! START TO FINISH IN 15MIN!

Hellrot Garage
2023 ж. 10 Қаң.
245 788 Рет қаралды
Жүктеу

Music by Lofi Breno - Head Bob - thmatc.co/?l=5C8D9026
Music by Lofi Breno - Stimmy Dance - thmatc.co/?l=31BC7FF2
My tuner is Jules at Be Racing
Contact him on Facebook or Website / beracingtuning
Buy your turbo parts and tune at
beracingtuning.com
My Build Sheet!
beracingtuning.com/be-racing-...
Instagram @Hellrot_Garage
Personal @jared.judy
Thank you for watching and please ask any questions you have! Make sure to subscribe!
Blue Coupe Turbo Kit
Before Shipping and Tax
Spa Turbo Manifold $450
Pulsar 3576 .63AR $600
Turbo engine mount $170
Precision 40mm Wastegate $300
Turbo cooling, oil feed drain $100
90 Aluminum, 90 Stainless, exhaust downpipe $200
Intercooler piping $200
Ebay Intercooler $100
HPX MAF $260
100lb Bosch Injectors $500
DW 300 Fuel pump $170
Turbo ms43 tune $450
Misc gaskets/clamps/fittings $100
$3600
www.amazon.com/3-0L-DISA-Valv...
www.ebay.com/itm/263255992198...
beracingtuning.com/product/10...
beracingtuning.com/product/bm...
beracingtuning.com/product/dw...
beracingtuning.com/product/ms...
beracingtuning.com/product/oi...
beracingtuning.com/product/rr...
beracingtuning.com/product/bo...
beracingtuning.com/product/tr...
beracingtuning.com/product/sp...
beracingtuning.com/product/pm...
beracingtuning.com/product/ms...
Offset coupling
beracingtuning.com/product/hp...
Spa Turbo Manifold
beracingtuning.com/product/sp...
Engine Mount
beracingtuning.com/product/bo...
Turbo
beracingtuning.com/product/pu...
Drain hose
www.pegasusautoracing.com/pro...
www.amazon.com/Vibrant-2873-D...
www.amazon.com/Fitting-Banjo-...
www.amazon.com/Vibrant-Perfor...
www.amazon.com/Natural-Alumin...
www.amazon.com/Universal-Turb...
www.amazon.com/Dewhel-Aluminu...
www.ebay.com/itm/292110976398...

Пікірлер

  • "I'm not gonna fully launch it here" *Proceeds to absolutely send it down the street* 💀

    @JacketCK@JacketCK Жыл бұрын

    • Its hard to control myself 😂

      @hellrotgarage@hellrotgarage11 ай бұрын

    • Was gonna say the same…proceeds to redline it in 1st 😂🤣😂🤣 have fun

      @ScantSquad@ScantSquad8 ай бұрын

    • Was about to state the same, haha. It's flying... i have a stock e46 so I'd know

      @joezen1693@joezen16936 ай бұрын

  • You are making great content and i think all e46 comunity is thankfull to you 💪

    @agdwhite5421@agdwhite5421 Жыл бұрын

  • Hey man, just wanted to say that you’ve been a HUGE help. Thank you for sharing everything! I’m almost done with my turbo build on my 330Ci. I have a ball bearing Precision 6262 turbo. Goal is to make around 400 - 430 whp 93. I’ll be honest, I was a little nervous going into this project just because I’ve never done a build this big before. It was the small things that concerned me the most. Watching your videos, I’m having a great time with this build and it’s been a fun learning experience. The only thing that I’m not liking so far is having to remove the oil pan for the oil return, lol. It is what it is. You’re doing a great deed for the E46 community and I think I speak for everyone when I say that what you’re doing is MUCH appreciated. Keep on killing it my guy 💪🏾

    @builtvisions@builtvisions Жыл бұрын

    • or run a scavenge pump and run it to dipstick tube

      @407_ryan8@407_ryan810 ай бұрын

    • @@407_ryan8 I actually ended up getting a new oil pan and created a drain by drilling out the pan. I then sold the original pan, lol.

      @builtvisions@builtvisions10 ай бұрын

    • @@builtvisions has your e46 been reliable after the turbo

      @04boogie-t14@04boogie-t146 ай бұрын

    • dawg are y’all cutring or arp studding like how long has this shit been holding up

      @testamentgames3054@testamentgames30544 ай бұрын

  • you are a true blessing to the e46 community man, thank you.

    @mad03mike@mad03mike4 ай бұрын

    • Thanks man, glad I got to make a series on this so it can live on here forever.

      @hellrotgarage@hellrotgarage4 ай бұрын

    • ​@@hellrotgaragehas email???

      @giwrgosmpakogiannhs859@giwrgosmpakogiannhs8593 ай бұрын

  • The coolant shower got me, lmao. Good content as usual, Jared 🔥🙏

    @bobafittness1346@bobafittness1346 Жыл бұрын

  • I been following your builds a while man. Good stuff.

    @jasonson86@jasonson86 Жыл бұрын

    • Thanks!

      @hellrotgarage@hellrotgarage Жыл бұрын

  • that loFi background is almost as good as this build mate. Been following you for a little while now and your content is getting better with each video. I hope you get the following you deserve.

    @schoolForAnts@schoolForAnts Жыл бұрын

    • Your 1st sentence had me liking the video before even watching it.The build got me to sub.

      @teamphashash@teamphashash Жыл бұрын

  • You need more recognition bro. Good vid

    @curry_luis_e4633@curry_luis_e4633 Жыл бұрын

  • great video man love the content

    @syssa4924@syssa4924 Жыл бұрын

  • Wow this is well built Congrats brother! Keep it coming

    @nomodnolife@nomodnolife6 ай бұрын

    • Thanks man

      @hellrotgarage@hellrotgarage6 ай бұрын

  • Build is sick

    @michaelhatfull3305@michaelhatfull33059 ай бұрын

  • This was a huge inspiration for my turbo E46. Currently setup for pump gas on 8 PSI boost tuned on an MS45.1 ECU with both 02 sensors in downpipe. I went with SevernTuning for the ECU flash. Still gets 20 ish MPG highway. But it absolutely rips when you put your foot down. Borgwarner S257SX-E spools at 3500RPM and sounds incredible

    @elijaah81@elijaah8110 ай бұрын

    • how much have u roughly spent on the car for the entire turbo kit to run good

      @SRR35669@SRR356698 ай бұрын

    • @ramanpreetmann5772 i had a list at one point. To get things as they are now its about 6k. I strongly recommend buying a kit tho. I peiced together all the parts individually and me and my buddies did the fabrication. It was very rewarding but it took months of work. Just buy a kit and bolt that bish on

      @elijaah81@elijaah818 ай бұрын

  • As a lover of E46s, its awesome to see someone modify an engine in detail on a budget. Very cool. I always wanted to boost my 3 series. Well done man. How are things holding up a year later?

    @on_another_level5661@on_another_level56614 ай бұрын

  • Great video man! Subbed!

    @braedenkardash@braedenkardash6 ай бұрын

    • Thank you!

      @hellrotgarage@hellrotgarage6 ай бұрын

  • very clean isntall.i like it

    @TheLudbe@TheLudbe Жыл бұрын

  • Damn that looked like it went smoothly lol looks like fun

    @96Caleb96@96Caleb96 Жыл бұрын

  • This is a great video thanks for being so in depth make me want a turbo E46 Bottom mount is the way to go for us California's I would love to put stock air box and make a hidden intake for turbo what did it make for power?

    @Simpyspec@Simpyspec Жыл бұрын

  • Surprised me when I saw the facelift bumper and preface lights and fenders. My car has same front except I added an m3 hood as well.

    @jasonson86@jasonson86 Жыл бұрын

  • The stock filter box has snorkels for cold air. Maybe you can rig one to go on the opposite side?

    @myREALnameISiAM@myREALnameISiAM11 ай бұрын

  • I have disassembled and rebuild my M54 motor out of my 330i that I personally owned for 10 years since it had 110k miles on it, It had 245k on it when it died. When I saw this video it made me comment. Number 1 It died one evening after chain tensioner guides finally broke off because they are made out of plastic and as it harden it crumbles, I pulled hard out of the driveway and the engine sezed. Later When taking the engine apart, I saw almost no crank bearings left, See my videos, especially the cylinder 1 had severe bearing wear. So, boosting a 200k mile M52 or M54 is crazy, honestly speaking you are a day or a week or a chance away from it going out to the junk yard. These are awesome engines but if you start from Mile 1, when its rebuilt completely.

    @aleksankazakov@aleksankazakov14 күн бұрын

  • Great documentation. So the stock ECU and reflash is enough to handle the boost? No aftermarket ECU needed?

    @vinzanity68@vinzanity688 ай бұрын

  • Great build. I did this in a 318 is low mount turbo. My turbo sits high enough to drain the oil itself. But i still have some smoke isues. Mostly when i come in a stop at trafic lights. What u susgest turbo rebuild ??

    @alentohida3718@alentohida3718 Жыл бұрын

  • Sick!!

    @bananskalet0074@bananskalet0074 Жыл бұрын

  • Man I bet that would be a fun thing to do on one of these! cool car!

    @delcorick9967@delcorick9967 Жыл бұрын

    • Thanks!

      @hellrotgarage@hellrotgarage Жыл бұрын

  • Dope content I love this car you should replace your main bearings and rod bearings motor has a lot of mileage and arp headstud

    @Assertiveman@Assertiveman Жыл бұрын

  • Draggy this thing. I'd love to see the 0-60 and 60-130

    @gabegjl@gabegjl10 ай бұрын

  • Dude! Awesome build! Got an e46 330ci 2008 that I plan to do this to. While I daily my e46 328 ci from 1999. Since my wife stole my E87 120D...haha

    @stefanburemo9661@stefanburemo9661 Жыл бұрын

    • Go for it!

      @hellrotgarage@hellrotgarage Жыл бұрын

    • @@hellrotgarage at the moment it's time that I'm short on. But the goal is still to be done by summer of next year.

      @stefanburemo9661@stefanburemo9661 Жыл бұрын

  • Damn you also put all links to buy parts, thank you!

    @oogento@oogento7 ай бұрын

    • No problem!

      @hellrotgarage@hellrotgarage7 ай бұрын

  • Appreciate the build… what’s your diff situation and have you broken any axles? I ask cause im na B30 welded diff and go thru axles but only when I run 18s.

    @sydewayzmo3905@sydewayzmo3905Ай бұрын

  • AWESOME

    @AvilaMk2108@AvilaMk21083 ай бұрын

  • Can u put the links to the parts in the description and what the best site to get turbos from (great content btw)

    @chanceholmes3482@chanceholmes3482 Жыл бұрын

  • Wtf I thought you hadn’t posted in forever but forgot my old yt account got banned, so glad I found these vids again, this project isn’t an IF but a WHEN I’m going to take it on haha

    @ddbbuilds@ddbbuilds Жыл бұрын

    • Sounds good man. Get after it. But yeah I don’t upload enough

      @hellrotgarage@hellrotgarage11 ай бұрын

  • what were the hp and torque numbers? great content btw too !

    @hacktay21@hacktay21Ай бұрын

  • Hey bud what’s the size of the silicone bit you’ve used on the throttle body for the intercooler piping?

    @hugomacedo2160@hugomacedo2160 Жыл бұрын

  • 7.35 into the video Close your eye's That bmw rain hits different don't it ❤ Good video all round which is rare on you tube these days 👏 👏

    @novaturbkkk@novaturbkkk Жыл бұрын

    • I appreciate it!

      @hellrotgarage@hellrotgarage Жыл бұрын

  • Where do you find internals for rebuilds?? I can't find kits anywhere, or specs to order everything separately

    @architecteye6089@architecteye6089 Жыл бұрын

  • How'd you know I was in the market for some sweet e46 lullaby sounds! That shower should work a treat

    @wiznz3659@wiznz3659 Жыл бұрын

  • Cool build man ! how much hp ?

    @mr.Bruutt@mr.BruuttАй бұрын

  • What was that left over in the oil pan? I have had my 2003 E46 for the past six months and starting to plan my build build.

    @Duedain@Duedain3 ай бұрын

  • That thing is fast

    @Christian-qg4vh@Christian-qg4vh Жыл бұрын

    • Its fun. Nothing crazy haha

      @hellrotgarage@hellrotgarage Жыл бұрын

  • Why you cut the turbo housing to mount the wastegate? This will influence the flow around the turbine wheel or not?

    @erayc.8925@erayc.89257 ай бұрын

  • I've been wanting to do this to my 2003 330i after I finish ZHP interior and exterior swapping it, how's a moderately boosted (10psi or so) like as a daily? 5 speed, 2.93 rear end. Of course there's more to break and more to watch, but has boosting been semi-quasi reliable?

    @zoomiesRMS@zoomiesRMS Жыл бұрын

    • it greatly depends on the health of your engine and the quality of your parts, but running about 10 psi should be fine if you do it, right 👍🏼

      @mrman1280@mrman1280 Жыл бұрын

  • do you have some what links to parts you used or listing?

    @Tuoppi39@Tuoppi39 Жыл бұрын

  • on god no cap

    @MrBeefsnorkel@MrBeefsnorkel11 ай бұрын

  • Holy

    @malachibobbitt8704@malachibobbitt870410 ай бұрын

  • hi i was wondering if you think i could put twins on them i have 2 sitting there pure 600s but there for a n54 you think i could make it work

    @stk_dyno8847@stk_dyno8847 Жыл бұрын

  • Dyno numbers numbers numberssssssss!

    @kiyabcs@kiyabcs7 ай бұрын

    • It only made like 360 but the engine died shortly after so that explains the low number. Was a junk yard engine.

      @hellrotgarage@hellrotgarage7 ай бұрын

    • @@hellrotgarage Ah Gotcha. Serious question though, why not get a nice e46 M3 instead of buying so many 3 series?

      @kiyabcs@kiyabcs7 ай бұрын

  • So what you are saying is I need to buy an aluminum welder and figure out how to weld? Very concise video though!

    @davidmcmillan1477@davidmcmillan1477 Жыл бұрын

  • have u though about going LSD or have you not had any issues getting the power down

    @bannasong98@bannasong98 Жыл бұрын

  • was this on the stock clutch? forgive me if I missed whether you clarified or not

    @LookSpec@LookSpec14 күн бұрын

  • Good edit!

    @konigvonpreuen8065@konigvonpreuen8065 Жыл бұрын

    • Thanks!

      @hellrotgarage@hellrotgarage Жыл бұрын

  • No CEL on an E46?? Subscribed

    @alcantarainterior8078@alcantarainterior8078 Жыл бұрын

  • Are those metal filings in your oil pan? From where?😅

    @martsmarts@martsmartsАй бұрын

  • Cool 👍🏽 must be awesome to drive with turbo. Never drove a turbo bm. Only Hondas

    @albert-rn6wp@albert-rn6wp7 ай бұрын

  • I dont think it was entirely stock tuning wise. The redline on a stock motor was 6500 stock, but in the first launch it looked like it got up to 6600 or 6700 ish. Could just be the inertia of the gauge

    @austinsparks4561@austinsparks45612 ай бұрын

  • Nice bild ! If I am not mistaken, you have used stock ECU right ?

    @bearroar7975@bearroar7975 Жыл бұрын

    • yes he did ms43 stock ecu

      @TheLudbe@TheLudbe Жыл бұрын

  • Does the rear end hold to this? Axles? Differential?

    @JoseLuis-nj3ib@JoseLuis-nj3ib6 ай бұрын

  • is there compare video before and after ?

    @thatquartz3559@thatquartz3559Ай бұрын

  • where did you sell your cats at to be able to get a manifold?

    @ruddgarage@ruddgarage3 ай бұрын

  • Fast as my n55 stage 1

    @GodKing804@GodKing804 Жыл бұрын

  • Great build How much power did it actually make?

    @MrClarck100@MrClarck100 Жыл бұрын

    • around 550hp

      @qu1ck1337@qu1ck1337 Жыл бұрын

    • Nah more like 400wheel

      @hellrotgarage@hellrotgarage Жыл бұрын

    • @@hellrotgarage that's a healthy number 👌👌 a M54B25 would yeald similar numbers or more like mid 300hp?

      @MrClarck100@MrClarck100 Жыл бұрын

    • @@MrClarck100 you can hit about 400 with a 2.5 at like 1bar but that's really pushing it

      @tonson5214@tonson5214 Жыл бұрын

  • Bro, how much is it doing in literes per 100km highway?

    @malcolmsaysomethinggreatka2017@malcolmsaysomethinggreatka201711 ай бұрын

  • Any advice for mods on a 2001 325i?

    @nickmatthews7882@nickmatthews78823 ай бұрын

  • Would this set up work on a z4 2.5?

    @KieroTakoBell@KieroTakoBell8 ай бұрын

  • how much power did it make

    @rype36@rype36 Жыл бұрын

  • Will this work on an xi?

    @gregosler9181@gregosler9181 Жыл бұрын

  • How did you weld that aluminum??

    @Fdeubcfhbbjhfd@Fdeubcfhbbjhfd4 ай бұрын

  • bro I NEED TO DO THIS TO MY CAR i’m always early to ur vids, i feel like this is hard asf to do on my own is there any way i can pay a shop to do this??

    @mousaps4413@mousaps4413 Жыл бұрын

    • im 99% sure he can build it for you

      @laintrain14@laintrain14 Жыл бұрын

    • @@laintrain14 fr?? how much would he charge tho?

      @mousaps4413@mousaps4413 Жыл бұрын

    • @@mousaps4413 idk bro, message him

      @laintrain14@laintrain14 Жыл бұрын

  • You think my engine can handle this setup around 400 hp with this setup? I got a 318i like yours with around 120000 miles.

    @iperfone2021@iperfone202111 ай бұрын

  • You can get the turbo more efficient by relocating that intake pipe, now it’s sucking hot air

    @niko7090@niko7090 Жыл бұрын

  • what e30 add ons was there i have a 330ci with the m54 and im trying to do this build just dk where to start

    @icedoutguap9727@icedoutguap9727 Жыл бұрын

    • Start by buying everything

      @xankpc@xankpc Жыл бұрын

  • How much HP were you able to make?

    @martsmarts@martsmartsАй бұрын

  • Is it a stock ecu?

    @dukevandermeijden8275@dukevandermeijden8275Ай бұрын

  • Is your subframe ok?

    @osh6767@osh67677 ай бұрын

  • hello, up to how much power can the turbo be given with this stock engine m54b25 (unforged) and how many hp would it be aprox.

    @bryanavilessepulveda8945@bryanavilessepulveda894511 ай бұрын

    • Mines on 8PSI and loves life. All depends on engine health. But 10PSI or less should be plenty reliable. Buy a quality manifold and quality turbo

      @elijaah81@elijaah8110 ай бұрын

    • Someone did 20psi with redline and the engine was fine after

      @jasonawesome3821@jasonawesome38215 ай бұрын

  • How are you venting to atmosphere if you’re running a maf?

    @xotocean1545@xotocean1545 Жыл бұрын

    • Bov has to be before the maf. Maf closest to tb

      @jonathanbryant188@jonathanbryant188 Жыл бұрын

  • Can I put a turbo in a 318i e90 n46 engine

    @adamziga2229@adamziga222910 ай бұрын

  • i have a 318ci with a 2.5 m54 from a 325i swap in it , how much would turboing it cost ?

    @xSaintsxRewindx@xSaintsxRewindx Жыл бұрын

    • Id say around 5k ish. Ive looked into upgrading my m57tu1d30 turbo systems and everything needed to get more power and thats around the price im prepared to spend and i think it would be pretty similar to this

      @amijantti6045@amijantti6045 Жыл бұрын

  • what will cause if you position the oil drain nipple lower in the oil pan?

    @dekacster@dekacster Жыл бұрын

    • Oil from the pan will try to go up the line

      @toastypoptart6953@toastypoptart695310 ай бұрын

  • 2016 I finished my E46 turbo build but a good tune was impossible back then on stock dme😢

    @Ars_fabs@Ars_fabs Жыл бұрын

    • Lots of tuners today lol

      @hellrotgarage@hellrotgarage Жыл бұрын

  • Hello is this an us block (cast iron) or a eu block (aluminum)

    @GarageBerings@GarageBerings5 ай бұрын

    • Iron US

      @hellrotgarage@hellrotgarage5 ай бұрын

  • makes me wanna turbo my 325i e46 lol, but too afraid to boost with stock internals

    @atteblo3303@atteblo3303 Жыл бұрын

  • It would be funny if u put the stick air box and put the air intake inside of the washer fluid tank and made it into a intake box

    @zeeeek1561@zeeeek1561 Жыл бұрын

    • You could actually do it the other way, hide a washer fluid container in an airbox to not lose the ability to wash your windows. 5 extra feet of hose and you're good to go.

      @janprokopenko7928@janprokopenko7928 Жыл бұрын

  • What did the sum of all the parts cost you brother? Just picked me up one of these cars

    @swagmeat@swagmeat Жыл бұрын

    • I have a video on that I just uploaded

      @hellrotgarage@hellrotgarage Жыл бұрын

  • How much power can a stock transmission hold and is it a getrag 5 speed

    @badtcat@badtcat9 ай бұрын

    • Getrags die with stock power. ZFs can handle 700 or so

      @hellrotgarage@hellrotgarage9 ай бұрын

    • This is a zf 5 speed

      @hellrotgarage@hellrotgarage9 ай бұрын

  • Any recommendations for a rhd manifold?

    @sebastianweber8024@sebastianweber8024 Жыл бұрын

    • Im not really familiar with them

      @hellrotgarage@hellrotgarage11 ай бұрын

  • hahah he said doodooo 2:26

    @badtzmaru7457@badtzmaru745710 ай бұрын

  • How much did this cost all in looking on doing this to my e46 325i

    @demetritaylor5745@demetritaylor5745 Жыл бұрын

    • I have a video of the cost

      @hellrotgarage@hellrotgarage11 ай бұрын

  • Will I be able to pass emissions when I do this ? Cause I got to have it ?

    @Millionaireskarz@Millionaireskarz4 ай бұрын

    • Uhhhhh yeah probably based on your tune.

      @hellrotgarage@hellrotgarage4 ай бұрын

    • Not in California thats for sure

      @mikhailtronik4322@mikhailtronik4322Ай бұрын

  • Hi, i don't understand. Do you use an new ECU ?

    @petittheme9767@petittheme97678 ай бұрын

    • No tuned factory ecu

      @hellrotgarage@hellrotgarage8 ай бұрын

    • Ahhhhh okay okay, can i do the same alone ?@@hellrotgarage

      @petittheme9767@petittheme97678 ай бұрын

  • i keep forgetting what it put down on the m54 before it went

    @iplaycs3@iplaycs3 Жыл бұрын

  • I have a 2001 330ci and a 2004 Z4 3.0 roadster I would like to turbo.

    @natewillis6413@natewillis6413 Жыл бұрын

    • Do it! Should be a similar process

      @hellrotgarage@hellrotgarage11 ай бұрын

  • What’s the HP?

    @ROMANIEXPERIENCE@ROMANIEXPERIENCE9 ай бұрын

  • Haha you said do do

    @randallsavage13@randallsavage13 Жыл бұрын

  • what did this cost you?

    @florider_hd@florider_hd7 ай бұрын

  • could you create a link to all the parts you used?

    @ghxstbmws3397@ghxstbmws3397 Жыл бұрын

    • Most of the parts are in the descriptions of the build videos.

      @hellrotgarage@hellrotgarage Жыл бұрын

  • What bhp was before and after ?

    @adamjohnston5250@adamjohnston525011 ай бұрын

    • Whp stock was 180 something. Now it was 360-380 on a base map. Nearly 400wheel

      @hellrotgarage@hellrotgarage11 ай бұрын

  • How much for beracing tune ?

    @fastshiftauto8941@fastshiftauto8941 Жыл бұрын

    • Check the website

      @hellrotgarage@hellrotgarage Жыл бұрын

  • I want my e46 (n42) move like this :D I dont know how to do any of that tho :/

    @aVeyt@aVeyt Жыл бұрын

    • n42 is already pretty unreliable haha

      @Rorukz-jv7xl@Rorukz-jv7xl6 ай бұрын

  • Just curious on a price break down..

    @devonsmith226@devonsmith226 Жыл бұрын

    • Have a video of that already

      @hellrotgarage@hellrotgarage Жыл бұрын
KZhead