20 Ton Hydraulic Forging Press
Height - 2330 mm
Width - 700 mm
Depth - 600 mm
Weight - heavy, mobile, dismantle.
Compression force - nominal 20 ton, max. 28t
Working pressure - nominal 180 bar, max. 250 bar
Safety valve setting - 180 bar
Motor - low rpm, 7.5 kW 10hp, 3 phase, 50 / 60Hz, 380V
Hydraulic Gear Pump - 30L/min
Cylinder - DOUBLE-ACTING, bore:120mm, ROD:55mm, stroke: 150mm
Probably the best press build video I've seen. Very informative.
The best, concise and very clear presentation of the build! Thank You for taking the time to think and present it so thoroughly
Enfin une vidéo digne de ce nom.. Pour une bonne presse hydraulique.
Great craftsmanship and an Awesome job! Thank you
What an amazing build. Thanks for sharing all the details.
So far the best video I have seen about this ! Like that you really showed almost all the dimensions on everything !
Wow! Thank you for sharing all the build details. This gives me a bit of confidence that I might be able to build a press. ))) Super video!
14min was agood time. And your editing And lighting are really good to bro. And that's a cool as hell project! Well done! Definitely subbed.
Ty jo, super build, koukal sem na YTube na spoustu podobných videí, ale to tvoje musí být jedno z nejlepších!
Hi Vlad. Great workmanship and a very well-produced video. I am really liked your graphics showing the dimensions.
great build, thank you for sharing
There is only one thing better than a well descriptive video and an excellent build and that's METRIC BABBBBEEEYYYY. Great build, enjoyed watching. Keep up the good work 🤟🤙👍🤙🤟
Good looking press right there!
Great build video thanks.
Ahoj, perfektní práce. Hydraulický lis opravdu luxusní.
دستت درد نکند داداش. بسیار سپاسگزارم
This is a great vídeo man, congratulations
Great work, great video, i like your work keep it up !
Not bad at all man ,looks good and functional ✌🏽
Good work!
Thanks!
some plans for this would be amazing
great job boy !!!keep doing ,i give y three stars boy.
Great work just just great
Very usefull video thanks 👍🏻
Thanks Vlad, this is exactly what start ups want so they can build themselves as a bought one is exorbitantly expensive.
I know this. Prices are really out.
they really get priced out of the market thats for sure
I was thinking about 30t until i saw this. Great job and thanks for showing me the strenght of 20t. I saw once declared 30t but after seeing the cylinder i calculated it. It was 24t max. But the one was way weaker ( around 20% ) than this one, I guess the motor was too weak for this.
Very good and practical
Cool!!
Muito bom
Great work buddy! Love your built! Any changes you made since you built? Any lock for the dies? Cheers
Watch me more videos.
Nice work ✌️
Thanks!
The press is great. In my opinion, the bottom of the metal sheet under engine is completely unnecessary and only collects dust and dirt. Without it, everything will fall down to the floor and be easy to clean. Extra screw holes could be useful to lower the anvil / table for larger workpieces and other works.
Very Very COOL.....
Vyrábíte lis i na zakázku?popřípadě za kolik,předem díky?
Are you selling this one?
Moc hezka prace bravo,diky za video vsechen ten matros jsi koupil v cechach ?Mam v plane si taky postavit takovej press ale jsem ve francii tak proto ta otazka kde koupit motor pumpu atd.Nemas nahodou planek nebo vykres ?
Díky, ano vše v Čechách. Motor i pumpu stačí dát název do vyhledávače. Plánek nemám. Koupil jsem pístnici v bazaru a zbytek jsem si v hlavě navrhl před nákupem. Jenom hadice jsem doobjednal jako poslední abych měl co nejpřesnější rozměry. Nakonec je to jednoduchoučké.
Zdravim, Super lis, asi nějaký plánek nemáte, co ?:/
Zdravím, chcel by som sa spýtať, kde ste zohnali ten piest? Z druhej ruky alebo od výrobcu? Respektíve z čoho je použitý ( tatra, bager, buldozér....) ďakujem
Zdravím, je to z bazaru na náhradní díly pro těžké stroje. Takže nic nového drahého.
Ahoj. Pěkná práce. Nejak mi ale nesedí ten průtok 30L na čerpadlu. To je při kolika RPM ? Ten pohyb beranu by měl byt 6.9cm/s což tady nevypadá, nehledě na to ze motor by musel mit 13kw. jen se ptám je to tvoje vec. Jen ted taky stavím a nerad bych se někde spletl.
Ahoj, 13kw motor je nesmysl pro 20t. Ja mam 7kw a pro kovarinu mam na menici pouze 10Hz a staci na vse (lis je diky tomu tichoucky). Proto take ta rychlost pistu. Pokud tomu dam 100% vykonu tedy 50hz tak je to mazec, ale neni potreba a ta kavitace, ktera vznika v potrubi neni lahodna pro uši.
Jinak vse si muzes zjistit. Je tam presne typove oznaceni vseho co jsem pouzil.
@@CZnipper aha. On je tam měnič. Omlouvám se. Toho jsem si nevšimnul. Na můj lis vychází podle výpočtů 23L a mel bych mit 4.3cm/s tak jsem se leknul ze bych to mel ještě pomalejší. Děkuji, jelikož čerpadlo už je téměř na cestě
Do you have a set of plans for this press?
Only in my head.
Did you get your hydraulic piston from a heavy equipment machine? Like a CAT excavator?
Yes, it's a recycle from a CAT excavator. It can be obtained for really little money. 😀
@@CZnipper Yeah, me and a buddy are looking for one right now. Hope we can find one.
@@michaelwood5519 Mainly find with the largest possible diameter. High hydraulic fluid pressures are then not required.
Super travail a combien d'argent € sa reviens pour fabriquer la machine
Le temps, c'est de l'argent. La presse du forgeron l'a beaucoup raccourci.
Dobrý deň,som študent spšt a robím ako SOČ-ku hydraulicky lis a chcel by som sa spýtať prečo ste použili 7,5kw elektromotor a nie nejaký slabší ? A ešte koľko bar. je max. Záťaž hydraulického čerpadla? ( hydraulika sa na strednej berie len okrajovo a nevie mi tam nikto z profesorov odpovedať na moje otázky ani poradiť niekoho kto sa tomu rozumie, preto sa obraciam na Vás.) Ďakujem.
Max. Bar máš hned v úvodu je to 250. Na motor jsou vzorečky. I slabší by šel, ale déle by tlakoval max a celé by to bylo hlučnější. Tento se ani nezadýchá a to i přesto, že dle výpočtu měl být o trošku výkonější.