How did you run the electricity for it? I get doing videos like this but you really left out an important part of it.
@KGBALLER508 ай бұрын
I thought I recorded the electrical part but turned out I never hit the record button.
@SC-xk6uk8 ай бұрын
Just run some 12/2 AWG (double pole breaker) cable from the panel to an outside disconnect (manual, Black wire L1, White or Red wire L2) sleeved with some 1/2” flex and probably a 1/2” LB with a connector for the disconnect box, then use a flex whip from the disconnect to the unit, the unit should tell you the wiring sequence on the wiring compartment cover (usually red =T1 black=T2 white=T3) green is bond
@brandondemerchant7946 ай бұрын
What size double amp breaker did you use?
@wargueta666Ай бұрын
Thanks for the video. I have this same unit. The install specs are pretty vague on electrical. It says 14ga. wire but doesnt say much else. I actually thought the unit was only 110, not 220v. Surprise!
@johnnyj23454 ай бұрын
Did you take the black mesh off of the grill? I live in canada and its starting to build up ice on it. Im wondering if taking off the mesh epuld help.
@JM-fe1tt2 ай бұрын
No. I live in Florida and it’s hot like hell all the time.
@SC-xk6uk2 ай бұрын
It would have been nice to see how you did the other half of the unit inside.
@michaeltaylor37452 ай бұрын
Sorry man the camera didn't record the footage.
@SC-xk6uk2 ай бұрын
Did it come with those feet that you installed on your cement pad?
@peterthomas30967 ай бұрын
No. I ordered them on Amazon www.amazon.com/gp/product/B07W3CQ8KY/ref=ppx_yo_dt_b_asin_title_o08_s01?ie=UTF8&psc=1
@SC-xk6uk7 ай бұрын
❤️❤️❤️❤️❤️❤️❤️ 👍👍👍 😍❤️
@aminuddinkhairulmohamedjaa14148 ай бұрын
Can anyone supply a link to the installation manual? I am particularly interested in finding out the mounting bolt hole patterns.
@alexfunk20476 ай бұрын
The manual doesn't have it either. I have to mount the bracket kind of measure the where to drive the hole for the freon line.
@SC-xk6uk6 ай бұрын
Where did you purchase it from?
@jacksinthebox80298 ай бұрын
Check the link below with the coupon code slickdeals.net/share/iphone_app/t/16819223
@SC-xk6uk8 ай бұрын
Also, do you have to purge the system before operating?
@johnnyj23454 ай бұрын
I didn't have to purge anything. after I vacuum the line then I open liquid lines and use it.
@SC-xk6uk4 ай бұрын
@SC-xk6uk ok, I actually meant do you have to vacuum before use but thanks for getting back to me.👍🏻
@johnnyj23454 ай бұрын
i have the same unit and size can you show wiring on outside unit tks you only have 1 wire goes in outside unit were is your 220v
@denisbenoit19864 ай бұрын
please reply back tks
@denisbenoit19864 ай бұрын
Sorry for the late reply. I haven't check my comments lately. Which part of the wire do you want to know. From the breaker box on the wall outside to the unit?
@SC-xk6uk4 ай бұрын
Why is everyone hiding the darn wiring job on the videos da*m
How did you run the electricity for it? I get doing videos like this but you really left out an important part of it.
I thought I recorded the electrical part but turned out I never hit the record button.
Just run some 12/2 AWG (double pole breaker) cable from the panel to an outside disconnect (manual, Black wire L1, White or Red wire L2) sleeved with some 1/2” flex and probably a 1/2” LB with a connector for the disconnect box, then use a flex whip from the disconnect to the unit, the unit should tell you the wiring sequence on the wiring compartment cover (usually red =T1 black=T2 white=T3) green is bond
What size double amp breaker did you use?
Thanks for the video. I have this same unit. The install specs are pretty vague on electrical. It says 14ga. wire but doesnt say much else. I actually thought the unit was only 110, not 220v. Surprise!
Did you take the black mesh off of the grill? I live in canada and its starting to build up ice on it. Im wondering if taking off the mesh epuld help.
No. I live in Florida and it’s hot like hell all the time.
It would have been nice to see how you did the other half of the unit inside.
Sorry man the camera didn't record the footage.
Did it come with those feet that you installed on your cement pad?
No. I ordered them on Amazon www.amazon.com/gp/product/B07W3CQ8KY/ref=ppx_yo_dt_b_asin_title_o08_s01?ie=UTF8&psc=1
❤️❤️❤️❤️❤️❤️❤️ 👍👍👍 😍❤️
Can anyone supply a link to the installation manual? I am particularly interested in finding out the mounting bolt hole patterns.
The manual doesn't have it either. I have to mount the bracket kind of measure the where to drive the hole for the freon line.
Where did you purchase it from?
Check the link below with the coupon code slickdeals.net/share/iphone_app/t/16819223
Also, do you have to purge the system before operating?
I didn't have to purge anything. after I vacuum the line then I open liquid lines and use it.
@SC-xk6uk ok, I actually meant do you have to vacuum before use but thanks for getting back to me.👍🏻
i have the same unit and size can you show wiring on outside unit tks you only have 1 wire goes in outside unit were is your 220v
please reply back tks
Sorry for the late reply. I haven't check my comments lately. Which part of the wire do you want to know. From the breaker box on the wall outside to the unit?
Why is everyone hiding the darn wiring job on the videos da*m