125cc TURBO Go Kart Build | Part 1 (Fuel Injected)
2024 ж. 26 Нау.
40 894 Рет қаралды
It's time to install a turbo onto our 125cc lifan powered budget drift kart! But we're taking it one step further and adding fully tunable fuel injection! This also works for the 110cc & 140cc motor.
MaXpeedingRods Turbo: bit.ly/3vmLmLZ
10% off code: MikeLake
Raceworks goodness - raceworks.com.au
SP tools = the BEST tools - www.sptools.com/
➡️ Two Step Garage Store - twostepgarage.com/
➡️ DTAC Store: droptheanchorclothing.com.au/
➡️ Instagram @itsmikelake
Episode 2 is here! kzhead.info/sun/gKpwns2SoWShfK8/bejne.html
Sorry for the delayed upload. I took a quick trip to America but i'm back now and PUMPED for this series! 😁
Saw ya mug in the background on the lz vid, would've been a blast.
Good on you bro You work hard and deserve to enjoy life a bit
Where can I snag the efi kit that was seen in the video?
Just a wee subtle flex🤣🤣
@@jesseoconnor475haha when ya work hard you gotta flex on the wins a lil 😛
THE KARTT IS BACK!!!!!
My guy! ❤️ Can't wait for you to ride it haha...😝
@@itsmikelake@RexH would bin it😂
Great Mike, I expected you would have fitted the turbo on this little engine, I can't wait to see the other episodes 🙂
We'll be taking our time with this build and doing it properly. No rushing stuff this time around! I want it to work perfectly 😁
@@itsmikelake 👌👍
Your builds keep getting more and more interesting. Really hope you achieve 100kph.
Haha cheers! I think we can with a gearing change and some more power 😁
Absolutley understand the part of keeping the spirit of where the project started, when you could just have started over, and I totally agree with you on projects like this especially! ❤🔥❤🔥
im hyped for more drift kart content
I’m ready to see this build I been watching all of them I wanna build one for my nephew
Do you have a link for the efi kit? Can't find it anywhere 😂
www.aliexpress.com/item/32786077851.html?spm=a2g0o.order_list.order_list_main.11.75c11802VVAhz7 😁
Let's go keen as to see the results and good to see U with Fink and the boys at Lz tour looked like it was a blast
Thank you bro! LZWT was absolutely insane. We love to see it
I bet i was watching it from home with a beer good weekend indeed
YESS NEW VIDEOOOO
Keep up these series!!!
Thanks! New video should drop Sunday 😁
Thanks mike you helped me soo much dar i got one too you are the best person on youtube i love you videos thanks so much
Thanks so much bro. Happy to help!
It’s Back!
Wheres my mini turbo you sent me🙏 Still hasn't arrived in the mail. Lovin the new mini kart content. 🔥🔥
Love your vids
Thanks for watching 😁
Nice !! Next !!! VIEWER FROM MALAYSIA !!!
Yewww thanks for watching!
Finally man been waiting every second lol
Sorry for the delay! haha
Nah I think it’s just me being inpatient lol 😂
keep taking it further please... this is the only thing i watch on your channel (no offense, its just this is the coolest thing on the channel)
More videos incoming!
Soo cool that make efi kits for this. Seems like a good kit
Right?! I was soo happy with I came across this kit haha
So keen to test this out! 👌🏼👌🏼🤣
Is there a link for this fuel injection kit? I can't find it and I would love to install this on my 125cc agm caféracer
I need more of the drift kart mate
Incoming! Hopefully dropping another vid on Sunday 😁
@@itsmikelake keen as I loved watching it from the start so good and the progress so far 🤌🤌
I have the feeling that the frame needs to extend quite a bit to counter some insane wheelies. Most of the weight is on the rear axle; engine and driver. The center of gravity of the frame is moved a little more forward but the heavier driver and engine are in the same position. Now, moving the engine could be a pain. You could move the seat forward a Few cm.
Yeah I think extending the rear of the frame will help with this a lot!
Where did you buy the EFI kit
Grind hard have copied you here but they use a middle size quad. It mini can’t wait to see this one running
Yeah those guys are so rad! Ours will be fuel injected so hopefully means it’s a little more tuneable 😈
@@itsmikelake e quad will get even more power youl be going through wheels every week 😜
Make sure that you make a intake plenum with a check valve that is roughly the size of the cylinder. With 1 cylinder 4 stroke engines when you turbo them without making the plenum this way the pressure built up will not enter the engine until the intake valve opens and then has already dropped in pressure making it very inefficient
Oh dang, i'll have to do some research on this one. I wonder if having the front mounted intercooler setup will help with this one?
@@itsmikelake watch grind hard plumbings drift quad bike, they just went through this problem.
Make the videos longer homie😭 can’t wait
Yes sir! Longer videos incoming 😁
Cool af
Thanks!
sick blick-182 shirt dude
Thanks bro! I got it at their show here a month or so back. Life goal ticked off seeing them!
@@itsmikelake that’s awesome man, I love the content you’re doing an amazing job!!
Have U considered some rear toe adjustment. From watching the lil animal wheelie on you it wld probably could dial a lil grip out of it. Not too much at a 100kmh y mad man. I do support it tho love it
I think extending the rear wheels backwards will help with this for sure. Haha thanks for supporting bro!
Pls give the alibaba link of the efi kit.
Wont having the turbo too far from the exhaust make it harder to spool ??
I shouldn't make much of a difference. People do rear mounted turbo setups all the time!
I feel like the turbo should be on the side that isn't next to the throttle
I think it'll come down to which side is easier to pumb the piping etc haha
@@itsmikelake sounds right 🤙
so you can turn a copy of the Honda 125 into the same thing as a Gromm has, who'd a thunk it... but did you know there are specific kits that have a block that bolts onto the side of the head and provide oil for the turbo?
I’ve seen those kits! I have a 12v oil pump currently but I think I’ll just get that block as it’s much easier and tidier
@@itsmikelake Grind hard plumbing co tried a 12 Volt pump, but it had too much pressure and blew the seals out
What fuel injection kit did you use?
www.aliexpress.com/item/32786077851.html?spm=a2g0o.order_detail.order_detail_item.2.3ab3f19cW6hEtZ
Mike you need to make a boost capacitor to make it run smoothly
I'll do some research on this one! Thanks
Race grind hard when your done
How good would that be 😍
Is there a link to buy the EFI kit?
www.aliexpress.com/item/32786077851.html?spm=a2g0o.order_list.order_list_main.11.75c11802VVAhz7
Can someone Tell me What Turbo i would Need for a 18 ps lawnmower
Boostedboiz did a full build series on their shopping trolley go cart and it’s edited turbo you will learn a bit from watching that
Oh hell yeah! Thanks Tristian, i'll check this out.
@@itsmikelake you need to build a plenium chamber to hold the spare boost because it’s a 1 cyl,
might need bongkers fans to extra cool the air cooled motor
This is a good point actually. An oil cooler should help!
@@itsmikelake seperate oil pump for the turbo??
noice
Toight 😁
Also how did u find wheels I can’t find some for a budget price
Ebay! That's where I find most of my stuff. Or Marketplace
Also aren’t u in Springvale cuz I swear I’ve seen ur place
Lets goooo
😁👊🏻
put a big valve head on it too or port the head atleast bc that stock one doesnt flow very well😁👍
See this is the advice I need! Surely we can port this one pretty easily 🤔. I’ll do some googling 😁
@@itsmikelake hell yeah😎
@@itsmikelakebtw can you give me the link to the efi kit, im thinkig of building a over 25hp yx140 turbo and a efi kit would be sick
I wonder if grind hard will take notes? 😝
Absolutely LOVE their content! I take a lot of inspiration from them haha
Hey can you give me a link for that efi kit?
Here you go - www.aliexpress.com/item/32786077851.html?spm=a2g0o.order_list.order_list_main.11.75c11802VVAhz7
This project is sick good job 👍
Thanks! I fricken cannot wait to hear the turbo noises 😁
Me too
I've been looking forward to this
What efi kit is that?
www.aliexpress.com/item/32786077851.html?spm=a2g0o.order_detail.order_detail_item.2.3ab3f19cW6hEtZ
Awesome! Thank you@@itsmikelake
I wonder who the other dude is 🤔 8:52
YESSSS MIKE YOUVE DONE IT AGAIN 🤙🤙🤙
link for the efi kit
www.aliexpress.com/item/32786077851.html?spm=a2g0o.order_detail.order_detail_item.2.3ab3f19cW6hEtZ
@@itsmikelake thanks :)
You sadly aren't the first one doing this, i've been following one finnish guy who is making a tunable efi turbo "monkey" mini bike with the Same engine
Yeah I saw his build, it's rad! But he didn't walk us through any of the efi setup or tuning etc. I'll be walking you through all of that.
When part 2
Tomorrow 😁
YES MIKEEEEEEEE 😂❤ love from the uk bro
Thanks! Appreciate it
Oh too nice bro
Sick build, hope it gets to 100 km/h!
Cheers! Let's gooooooo
Damn lol
Mint build
Why didn't you drive lz tour
I was there helping my dude Luke Fink with media and crew chief for him. I had a fricken BLAST!
1st
Where part 3?
Drops Sunday!
It’s needs some down force!
Soon!
Turbo looks too big! A vz21 or rhb31 would be better suited, but ill keep watching and see what happens haha
I'm really hoping it's not! Haha. I wanted a slightly bigger one so we could get some spicy turbo dose noises. I can always swap the turbo out to a smaller one if we need to.
@@itsmikelake yeah, I think your old one off the 49cc would probably have a better chance, think its a vz21 style. But good luck!
someone needs to speak to mike,,i think hes really lost it this time,,,haha
Hahahaha you're not wrong!!
Let's hope the cheap turbo doesn't blow oil cause that'll go right in your face haha
its a 500 dollar turbo i think it will be alright
Haha we'll build a full exhaust that dumps out the rear so this shouldn't be an issue!
Hey man I like your videos but why search gnarly cliffhangers all you did was chop the frame and show us a turbo please put more into your videos makem longer lol
I do what I can bro. Some vids will be longer than others depending on the complexity of what we're doing etc. Enjoy the free content!
Overcomplicating it with electronics, Mike
Carburettor turbo setups don't dose. This is a problem haha. I fix with EFI
Weld some wheelie bars on for the sick wheelie launches hahaha
Haha yes! I'm going to make some removable bars for sure
@@itsmikelake please keep this same follower engagement when you blow up properly bro💪💯
r u a auzzie
New Zealander living in Australia 😁
2ND
PIN MEEE
Why do you sound like that
🤣 I don’t even know how to answer this question