ULTIMATE TIPS For Using An Ultrasonic Cleaner (Must Try)
Ultrasonic cleaners are the #1 way to clean carburetors, tools, small engine parts, automotive parts, jewellery, eye glasses, coins, dentures, hair brushes, combs, medical or dental equipment, gun parts and so much more. You too can clean your parts like a professional!!
How does an ultra sonic cleaner work? It converts energy into high frequency sound waves which are sent through a tank of liquid creating a cleaning action called cavitation. The sound waves create tiny bubbles that rapidly increase in size and burst giving off masses of energy against the surface of the components being cleaned. This is ultrasonic energy.
What type of solutions to use? There are many solutions to use including water, dawn dish soap, professional cleaners, but stay tuned for my personal favorite.
Reminder to make sure you’re using the cleaner in a well vented area if you’re using a corrosive substance.
👍Please click the like button and tell me what you think of this video in the comments section below. 👇👇👇
✅Click here for an ultrasonic cleaner ➜ amzn.to/32oVRzu
For more videos like this, check out:
👉UPDATE: Ultimate Tips For Using An Ultrasonic Cleaner ➜ • UPDATE: Ultimate Tips ...
👉Best Way To Clean a Honda Style Carburetor ➜ • How To Clean a Honda S...
👉Easiest Way To Clean A Metal Briggs Carburetor ➜ • Easiest Way To Clean A...
👉Easiest Way To Clean a Plastic Briggs Carburetor ➜ • EASIEST WAY To Clean a...
🔧WELCOME to the Steve’s Small Engine Saloon KZhead channel! Here you will find a vast library of easy do it yourself repair videos for all types of small engine equipment like chainsaws, weed eaters, hedge trimmers, brush cutters, leaf blowers, lawn mowers, pressure washers, generators, riding lawn mowers and so much more. I have been a small engine mechanic for over 30 years and my videos are absolutely loaded with tips and tricks that I have learned and want to pass on to YOU. 🙂
👉SUBSCRIBE for more free repair videos ➜ / @stevessmallenginesaloon and don’t miss another video by turning on the bell notification 🔔
👉JOIN this channel to get access to perks 🤩 here ➜ / @stevessmallenginesaloon
⭐Members-only have cool access to badges, emojis and exclusive content as well as a way to help support the channel.⭐
You can connect with Steve here too:
✅Visit Steve’s WEBSITE ➜ www.stevessmallenginesaloon.com/
✅Visit Steve’s PARTS & TOOL STORE ➜ www.amazon.com/shop/stevessma...
✅Follow Steve on FACEBOOK ➜ / stevessmallenginesaloon
✅Follow Steve on INSTAGRAM ➜ / stevessmallenginesaloon
✅Follow Steve on TWITTER ➜ / stevesaloon
❤️Thank you for watching!! If I saved you some money with this video, please consider supporting my efforts with a donation ➜ www.paypal.com/cgi-bin/webscr...
💡If you have an idea or suggestion for a video, please fill out this form ➜ www.stevessmallenginesaloon.c...
If you choose to try one of the suggestions made in this video, you do so at your own risk. No information contained in this video shall create any express or implied warranty or guarantee of any kind. Any injury, damage or loss that may result from the improper use of tools, equipment or information contained in this video is the sole responsibility of the viewer and not Steve’s Small Engine Saloon Inc. Please ensure that you take all proper recommended safety measures before attempting any project. Steve’s Small Engine Saloon Inc. assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. As an Amazon Associate I earn from qualifying purchases.
#stevessmallenginesaloon #smallenginerepairs #smallengine #repair #diy #fix #troubleshooting #howto #engine #howitworks #doityourself #lawnandgarden #ultrasoniccleaner #ultrasoniccleaning
✅Click here for an ultrasonic cleaner ➜ amzn.to/32oVRzu For more videos like this, check out: 👉UPDATE: Ultimate Tips For Using An Ultrasonic Cleaner ➜ kzhead.info/sun/ncl7cpGCZ5iFo2w/bejne.html 👉Best Way To Clean a Honda Style Carburetor ➜ kzhead.info/sun/qKWBlMyte6Kbfq8/bejne.html 👉Easiest Way To Clean A Metal Briggs Carburetor ➜ kzhead.info/sun/nq6foLiQaX6uY58/bejne.html 👉Easiest Way To Clean a Plastic Briggs Carburetor ➜ kzhead.info/sun/mKt_j92mopVpdmg/bejne.html You can connect with Steve here too: ✅Visit Steve’s WEBSITE ➜ www.stevessmallenginesaloon.com/ ✅Visit Steve’s PARTS & TOOL STORE ➜ www.amazon.com/shop/stevessmallenginesaloon ✅Follow Steve on FACEBOOK ➜ facebook.com/stevessmallenginesaloon ✅Follow Steve on INSTAGRAM ➜ instagram.com/stevessmallenginesaloon/ ✅Follow Steve on TWITTER ➜ twitter.com/SteveSaloon
Many thanks again Steve. Are you doing you tube full time or do you have a shop/‘regular job’ that you do. Best of health and keep pumpin out those videos. 👍👍
Can I put my baby there?
Hey Steve! What would you suggest as a more affordable cleaner for jewellery? I don't want to pay thousands, it's just for my rings that have intricate designs with lots of nooks and crannies that even Interdental brushes can't get to - but I also don't want to damage the diamond settings or stones etc. Never used one before, so not sure if I need to buy a special solution for them too? Thank you for your advice!
@@GildedFashion Liquid dishwashing detergent and water works well.
I hate to break glass too I always buy or recycle plastic also
Hello Steve ... I love your channel, thanks for all the great advice. I do have a small hint about this video. Your explanation for using an isolating container is spot-on. I've used ultrasonic cleaners for years to clean small parts in the pharmacy industry. When using a beaker or a jar to hold the cleaning solution and the part, it is better if you use a weighted but vented cover to hold the beaker upright and sunken against the basket bottom. If you allow the beaker to float, it might stay in the same orientation the entire cycle and not all parts of your part will be exposed to the cleaning action. Always use the basket and never set the beaker or jar on the floor of the cleaner. Always fill to the fill mark. Always make sure the part in the beaker is below the water line in the cleaner .... and if at all possible, use deionized (distilled) water to fill the cleaner tank. Also I know glass is a no-no in your shop, but glass is the container-of-choice, because a plastic container can flex enough to attenuate some of the ultrasonic signal, whereas glass will allow transit with minimum attenuation. You can tell we had shop SOPs that required this stuff, but I'm only offering here just to help out. :)
You are right on the spot.
Calvin: Excellent suggestions, especially on the venting idea. I have a question; I have had great difficulty finding information on high quality plastic jars that are truly resistant to gasoline. I received an ultrasonic cleaner as a gift. I want to use this isolation method to clean metal parts. I have easy access to mason jars. My fear is that the metal parts vibrating inside the glass jar during cleaning might cause it to break which would cause a huge mess. Is that a baseless fear? Your input is appreciated.
@@wrongfullyaccused7139 I'm wondering the same thing, I'm also wondering how thick of a glass container he's using. Most glass jars are fairly thick, not sure if that would be too thick or if thickness even matters here.
@@bodeine454 ;I don't think the thickness would matter that much. I do suspect that if the part being cleaned is heavy enough and sharp enough it might be capable of breaking a glass jar. Fact is I just don't know and that bugs me. My son got me an ultrasonic cleaner for a gift. I will just experiment and learn.
@@bodeine454 ; That seems logical. Perhaps you end up with a mess, but it can be cleaned up afterwards. Best of luck. Be blessed and stay safe.
For cleaning really small parts, put them into a stainless steel mesh tea ball. It holds them safely and serves as a built-in strainer when removing the parts from the container. Tea balls are available in many sizes from 1" to around 4" diameter.
I have done this too ! Many times, for watches
I work in a lab where we use sonicators daily. So you fill it up with water, then you put your parts/samples in a small glass container, and the cleaning solution in the container with the parts. I do like the tea strainer idea though.
I love learning from a real person with no hidden agenda that actually has solid advise and experience. Thanks Steve. U are the mvp on KZhead right now.
I appreciate that!
You have something brown on your nose.
I agree. I like your attitude.
When cleaning small parts, I sometimes use a zip-lock bag with cleaning solution just covering my parts, the bag draped over a rod or dowel, and held in place with clothes pins.
me too, do you have to suspend it or can't it just drape over the side? I'm new to this
I use nitroglycerin, it cleans the whole barn right down to bare Earth, 6" reinforced floor and all. However, I am still looking for the carburetor
😂😂
@@stevehairston9940 LMAO - Hillarious Always someone who brings us all back to reality with humor.
@@JayHutchG I wonder how many people read that, but didn't get that it was a joke. 😂
@@stevehairston9940 that is okay there won't be enough pieces left to prosecute
Here it is in my garden. Come and get it I’m in Brisbane Australia
I will be completely honest. When I came across Steve's channel for the first time, I was thinking who is this goofball but after watching several videos, I am now hooked. Steve is very sincere in helping people and is a down to earth regular guy. Thanks for all the helpful tips, new favorite channel!
Thank You...
Same here!...I thought this is gonna wreck the good name 😉😉 ..but truly he has some great tips and a huge wealth of knowledge in this industry. May I say very helpful personally as my business depends on his business. 👍👍 🍻 Cheers Steve!
Steve is the bomb 👌👌great info always. Ireland callin
Steve is sincere and helpful...but that doesn't mean he is not a goofball!
Agreed!!
As a watchmaker who works with ultrasonic cleaners regularly and also wears glasses, be careful because cleaning your glasses in the ultrasonic can remove coatings from your lenses. Don't ask how I know.
Thank you!
Thank you!
It can definitely remove or damage the clear coat finish and other finishes from the frame/temple bars. Don't ask...same.
It can also loosen screws to the point that they fall out!
Great information thanks
I've used distilled white vinegar and distilled water mixed 1 - 1 to clean parts and it works great by itself, but your tip about the plastic containers really knocks the process of cleanup out of the park. Thanks for sharing this great idea.
You're Welcome...
Had no idea it would work through jars like that. It brings it to another level. Thanks for the great idea.
I agree.
You're Welcome...
Sound waves don't care bout containers 🤣
I agree, but in retrospect, I feel like I should have realized that. Glass conducts sound quite well.
@@MrTheHillfolk Like honey badgers?
You don't like having glass in your shop, but there are 30 glass beer bottles behind you:)
lol good point.
LOL! Great point, but I don't use those, they just sit there as ornaments....
The beer won't be knocked over. That would be alcohol abuse and simply not tolerated!
Steve's Small Engine Saloon what about Naptha?
@@StevesSmallEngineSaloon , Those lined up bottles there are Great BB gun targets. Just go to the other side of the garage and see for yourself :-)
Awesome tip with the plastic containers. Keeps the unit clean and easier to deal with. Thanks for this tip. I actually have a small one that picked up at a garage sale and we'll use your tips.
The best introduction I have seen yet for starting to use my new Ultrasonic cleaner. Thanks Steve!
Wow, thanks!
If you're struggling to find a decent sized jar I found that ziplock bags work just as well.
Literally just thinking, fill the bath, but put the part eg bike cassette or chain in a zip lock....
thanks, i'll try that :)
...then after pour the cleaner back into it's storage container but through a coffee filter to remove gunk
I've been doing that for a few years with my pistol parts. It's been fantastic
I asked this question then immediately saw your comment. (Embarrassed)
I bought a big cleaner like yours several years ago and haven't used it over the past couple years. So, I forgot how to use it. Thanks to your video it gets me up and running and with some new ideas to try. I've got some wheel bearings from my trailer that I want to clean and was considering filling the whole tub with kerosene. But, now, I only have to fill it with water and put the kerosene and bearings in a plastic jar and I'm good to go. Thank God people like you help your fellow man so much with these informative videos.
Right on buddy! Thank You...
This is the first video that came up when I wanted to get some info for a cleaner and after watching it, I purchased one immediately. So glad I watched this as it has made cleaning of my airbrushes so much easier. Great video with great info
Thank You...
I'm using it for airbrushes also, what solution are you using. Super Clean (Purple Container) does an OK job but I'm not sure how corrosive that is.
@@GaryNorton_C, I just use standard acetone. Does the job perfectly
I'm considering an ultrasonic cleaner and went to your channel, knowing you probably had something on it. Your tips are brilliant! I wouldn't have thought about the peanut butter jars and I WOULD have been one of those guys that partially filled the machine and paid the price. Keep up the great work!
Awesome! Thank you!
What a great video. I never would have thought of using containers like that. This is one I won't forget the next time I use my ultrasonic cleaner. Thanks Steve!
You are so welcome!
Hi Steve, awesome video and HUGE appreciation for the information. last year i found an Ultra Sonic cleaner designed for window blinds, the tank is 2.6 metres long, 180mm wide and 400mm deep (102 x 7 x 15 inches), capacity of 180 litres (47 Gallons) it was being used for cleaning gearbox parts and the company were moving (or closing). it has 2 power supplies, with adjustment for amplitude and frequency, and 3 massive transducers in the tank, and it has a separate tank for water and rinse aid, it also has two heating elements that operate on an external power supply. i got it for AUD$150 and was told they paid $4K, the crate of chemicals they gave me were worth 3x what i paid. with your great advice i can now use it for everything that will fit within the 7" wide constraint.
Excellent!
Great score on that tank!
Just got my cleaner, wasn't sure about the noise it made so went looking for a YT and got this first hit! THANK YOU!!!! You just saved me hours and hours of cleaning!!!
Fantastic!
It also accelerates the effects of rust removers like evaporust. I put evaporust in jar with the parts to be cleaned and then the jar in the ultrasonic with plain water. I've also used ziploc bags instead of jars.
How long will the bag survive in the cleaner?
@@gustav901 It would depend on the actual bag, I would think. Temperature matters also,. I haven't done any testing to failure.
I see people in the 3d printing community use mylar bags as they last a lot longer than regular plastic.
Ziplock bags was what I was thinking about
I had to clean a big ball bearing from an autoclave that had 20 years of baked in grease, hard as a rock. I put it in a ziplock bag with gasoline, with that inside another bag of plain water. That was because I was using the ultrasonic cleaner in surgery... late at night when nobody was there to say no. 20 minutes. Worked perfect. This was back in the 70's.
I use my ultrasonic cleaner to clean my airbrushes. I put my parts in a small container (I use a stainless steel dentists containers filled with thinner) and the sonic action transfers . Been using my Heathkit ultrasonic that I built from a kit back in the late 70’s. I’ll have to check out these newer ones.
The idea of using a container is Legendary. I have never seen or heard of anyone mention that idea and it totally makes sense. You're The Man Steve !! Greetings from Petrol land, here in Australia lol !
Thanks Mate!
Excellent idea using plastic jars with a screw top lid. Mine is large enough that half of a vinyl LP fits. I made a motorized shaft that the records slide on tightly and they are spun at about 2.5 RPM. I normally use Simple Green or Pine Sol.
Steve I really appreciate the info you post online I needed valve lash info on a honda GX270 and your sight poped up!
Phenomenal idea Steve. Keep it up I learn something new from you every time you put out a new video.
Thank You...
Wow! I am impressed. This totally fits my needs with no need to muck-out the cleaner's tub, what a beauty!
Right on
I cleaned a whole bunch of bolts washers and nuts in a plastic quart jar filled with vinegar. When I finally got around to checking the rusty bolts out it had been about a whole year. It was messy and I had to dispose of all the rust. But the bolts nuts washers were all beautifully cleaned. I also have a Ultrasonic cleaner for small stuff and I stopped using it for the same reason you talked about having a greasy ultrasonic tub. I've been learning more about Ultrasonic cleaners and thanks to you I'm going to try vinegar in my ultrasonic cleaner. Thanks for all the valuable tips!
Great tip Steve , thanks . I need to rebuild a couple carbs and was going to use my ultrasonic cleaner. Better tell them it will remove paint with just plain water.
"Sea Clean 2" is another one, it comes in concentrate for de-rusting metal I use electrolysis first which turns the red rust black, then ultrasonic cleaning to remove the black magnetite afterwards
Just got an ultrasonic cleaner last week, used it for a couple hours filled at partial level, still works great, but I'm so glad I saw your tip about filling it all the way up to the max fill line before I did this too long and ruined my machine. Thank you!
You're Welcome...
Best idea for using an ultrasonic cleaner I've ever heard. Steve you're the Einstein of small engine repair!
WOW! Thanks Donny...
WOW. Never thought of putting it in separate jars to keep the solution clean
Hi Steve, just bought my first cleaner for motorbikebike parts. Love the tips and I think you’ve just saved me some money as well. Thanks very much.
You're Welcome...
Steve, just wanted to thank you. You've saved me quite a bit of money and aggravation just this weekend with fixing my Echo string trimmer. Just a question about the ultrasonic cleaner, if you use a jar with dawn soap and water mixed, does it build up pressure, like if you filled it and shook it? Just wondering. I'm going to order one of these cleaners. On a side note, I watched the ultra sonic cleaner video's out of order, and I thought you was joking around when it made that loud noise when you first turned it on. Thanks for sharing!!!
Great idea ! I must be out of it , didn't know they were so inexpensive ,gotta get one . Thanks again Steve . .
I watch HUNDREDS of youtube vids on how to do stuff. This is one of the best tips I've ever seen!!!
WOW! Thank You...
I have a similar unit, but with 2 dials. 1 for heat, and 1 for time. I rebuild old tube test equipment & old tube radios. It's great for cleaning parts of these devices. Thanks for the tip on using jars!
Very cool!
I never would’ve thought of doing it that way you have such great information I appreciate it
Any time!
I use cooking oil, vinegar for rusty parts, and degreaser. Thank you that was helpful.
Outstanding video, i purchased a ultrasonic cleaner yesterday, have not tried it yet, due to the concern of the machine getting filthy inside.i have a couple carburetors to clean and some tools, although i have many rhings in the house i need to clean. Thanks to you i now have a solution. Looks like tomorrow i will be eating alot of peanut butter. Rhanks again. Double k
Nice video! I liked the "Welcome guys AND girls" part. Just a little heads up to everyone - be SUPER careful with gasoline in your shop and also think about the vapors (extremely flammable). Gas in containers other than for a motor is a very delicate thing. /Guy speaking from - several plastic surgerys, weeks in the hospital and years of recovery - experience
I can't belive no body is mentioning this. That little plastic jar is holding back an explosion. Surely, it's pressured during the clean.
I use Mr. Clean liquid. Just restored an entire drum kit and a lot of tools. Worked like a charm. I re use the solution until it's too dirty.
Steve l recently brought out my old leaf blower that I gave up on about five years back l was going put it in the trash. After watching your videos I cleaned the exhaust outlet adjusted the carburettor It is now running like new thanks great videos . 🏴. 🇬🇧.
Right on John! You're Welcome...
Who throws your lower in the garbage? Do you do it to the wife also?
I just got my ultrasonic cleaner 2 weeks ago. I bought it specifically for cleaning carburetors. I haven't tried Gasoline yet but I will now after seeing how fast it cleaned that socket. I've been using Simple Green at a very mild 10% solution and it works very well to and smells much better lol. Thanks Steve for your videos and sharing your wealth of knowledge.
You're Welcome...and Thank You...
Does the simple green discolor the carb body ... cause it to go darker in color ??
@@SteffanoDucati try simple green Pro HD. $14 a gallon. Not supposed to effect aluminum
I would hold off on flammable liquids, a flash fire could result.
Wow Steve ! Thank you for the tip it will go along way. My husband and I. Ar.e locked in now for purchase. You are ON IT ON IT !
Use the same idea from the fuel bowl on your lawnmower. Install a float around the jar’s neck to prevent it from tipping over and contaminating the clean tub water. Just a thought. Great ideas Steve.
I really like the idea of using gasoline to clean carburetors. It shouldn’t hurt the fragile diaphragms and what nots. Thanks for the tip. Great video.
Don Better than how we did it in the 70s/80s. Soak the carbs in gas and just use pieces of wire, bristle brushes, and picks to clean them with our bare hands.
yeah I'm use to by hands with petrol but i was afraid to use petrol in the ultrasonic cleaner for risk of ignition. but containing it like that sounds great.
@@AnthemBassMan I was a mechanic back then and we used to boil them out in carb cleaner, ya that stuff wasn't toxic at all. Maybe that's why my wife insists I'm dumb?
@@mattmoilanen3813 Yep! Then we graduated from straight gas to the 1 gallon cans of Berryman's B12 carb cleaner.
@@mattmoilanen3813 My old work place had interesting setup to clean spray guns. 100 liter barrel half full of acetone, suction pipe to pneumatic liquid pump, from there trough rubber hose to copper pipe made into nozzle that spurt into stainless sink where it was directed back to barrel. First time cleaning the gun my rubber gloves melted, so what "smart guy" does? Takes them off and washes it by hand... After doing 4 color custom paint job and washing the gun several times, i was so drunk from skin contact and gasses i almost fall over. Hellawa hang over next day and pretty sure my IQ drop 20 points after that...
Pinesol hands down best cleaner I've found. Plus the shop smells great
Yes, but it needs to be the original stuff. The original is the only one that still contains actual pine gum. The other new fancy flavors are just detergent cleaners and do not work nearly as well.
Steve, your down to earth , like you're videos , can't wait to get a ultrasonic cleaner , and follow your steps -thank you!
Awesome! Thank you!
I was debating on getting an ultrasonic cleaner, but I was worried about the cleanup. Steve, great tip. Ordering one now. Thx
Hope you enjoy it!
You are correct, great way to keep the cleaner clean and reduce the cost of solvents. I've worked in several material labs where we needed to use solvents to etch materials, which would harm the stainless tub. We used pyrex beakers, so you only use the amount of solvent you need and you do not damage the cleaner tub. The peanut butter jar concept is great as long as it stays sealed and you aren't using a cleaner that will eat through it. Also some solvents will gas just from the heat of the ultrasonic action and could build up pressure on a sealed container.
Aside from heat, the gas can't build up significant pressure because it's not adding gas to itself--it's sealed, right? No? I can see a tad of build up but not more than space the bubbles would occupy. As long as you aren't adding heat!
I've been using simple green and water in mine. Has worked well cleaning small carburetors.
Thanks for the great video I just got my first ultrasonic and the way your cleaning stuff sounds excellent and I’ll be doing the exact same thing. Definitely with gas and sealed containers wow perfect!
Right on Jimmy! Thank You...
My go-to ultrasonic solution is the pro-grade Simple Green (which, ironically is purple), it has additional surfactants (reduces surface tension) which makes the ultrasonic action more effective
Why would deionized water (distilled water) work better, do you know?
@@riccardocarbo2479 deionized and distilled water are 2 totally different kinds of water. For an ultrasound cleaner you'll want to use distilled water
@@scottguyer They are basically the same thing, just different ways of production. Distilled is through distillation. Deionized is through filters. Both should result in pure H2O with no impurities. Only real difference might be the PH level. Deionized is "poor mans" distilled water. As its far less costly to produce than to actually distill.
@@scottguyer i presume the goal is to keep the tank clean and free from deposits. deionized/demineralized works just as well. why distilled?
@@asusreviews you have no idea what de-ionized means. if it was filtered , it would be called "filtered".
I absolutely gave this a like! Great information! Not only great information but explained expertly. Massively appreciated. Thank you very much! New subscriber 👍
Awesome, thank you!
Super simple way to not waste cleaning fluid with this machine! Great tip Steve.
Thank You...
Thanks Steve, i have just started using my newly delivered 6L ultrasound cleaner and the tip you demonstrated is brilliant. I am surprised the owners manual doesn't suggest the same. And yes way down here in Sydney Australia we call it petrol :)
Right on mate! Thank You...
Dude that is genius! I wouldn't have thought that would work, but now i see it does. 👍 I would've thought gas would be dangerous, but i guess im wrong. I use a mix of white vinegar, and Dawn. I've also used other types of degreasers including Awesome Soap. When i saw you holding the beer at the end it got me wondering....🤔 I wonder how well beer would work? 😅
I talked to a application engineer at a ultrasonic company and she said that plastic absorbs the energy and glass is best.
I read that soft surfaces absorb the waves and so are less efficient.
@@SiaD777 You are correct. You should use glass if you are going to put a container into an ultrasonic cleaner. You need to transmit the shockwaves, not have them absorbed. You should avoid plastics, rubber, UHMW, etc....
Yep it sure does -- and you beat me to it! :)
@regalblue41 that's a line that should have been added to the Constitution and etched in stone above every court house in America.
@latest plague ew
Try mineral spirits. Mineral spirits are the standard solvent used in parts cleaner sinks. Without even ultrasonic waves, they clean grease and other junk from tools, parts, etc., just by soaking so I would think it would work beautifully in a ultrasonic cleaner. In addition, it's safer than gas. I don't know what I'd do without my parts cleaning sink and, after watching this video, I think I'll get a ultrasonic cleaner and try mineral spirits in it. BTW, your videos are the best! They're clear, accurate, well-taped, and you explain things perfectly. There are too many videos out there by people who really don't know their subject and who shouldn't be posting videos because they steer people wrong. There are people posting instructional videos on things they're doing for the very first time (incorrectly!). Keep posting these great videos and it's a pleasure watching such a nice guy explaining things who knows what he's doing and isn't on an ego trip.
I was thinking this exact same thing. Im very curious now. Dont have an ultrasonic cleaner, but am seriously thinking of getting one after watching this video
Good thought. Mineral spirits are far less flammable than gasoline. Kerosene or diesel would be similar but stinkier. I often use Coleman fuel as a low odor gasoline like cleaner, but it's just as flammable as gasoline. Every time I use it I think extra hard about any possibilities for spillage or ignition. As far as I could tell from the video, Steve is appropriately careful in handling the gasoline.
Flammable liquids in an ultrasonic are a no no. Can combust
Hey guys I liked your post and the replies you received so I wanted to tell you my experience trying this out. I have a small ultrasonic cleaner that was made for cleaning firearms because you needed two different fluids to clean it, a cleanger and a oil type salutation. They were expensive and required putting one in, removing the liquid and putting in the other solution so that moisture wouldn't corrode internal parts and lubricate it. That was all a big pain in the ass so I stopped using it. When I ran across this video: I thought it was a great idea because the gas would clean and not leave any moisture behind. The first time I did it I used a plastic potato chips container and it worked great when I tried again the container leaked the dirt and gas in the water and I was left with a big mess again. Really needing to clean a barrel with a stuck and rusted part so I tried it again this time with a glass container and that worked great. Now for the next time I'm going to try and find a new solution that will clean but leave no moisture behind and not be as dangerous as gas. I didn't know that I could use it with water and just add a container with the liquids I wanted inside of it and not have a big mess. What a great tip.
To Mr Burns thanks for sharing but you must have some large oo to even think about Coleman is fuel. I was once camping when the only things you could use at that time was Coleman fuel for stoves and lantern. I was having a hard time lighting a camp fire and I got the great idea that Coleman fuel would be a good substitute for starting the fire and pored some on the wet wood and struck, a strike anywhere match on the metal ring around the wood and the spark from the match must of ignited the fumes and caused a large explosion that luckily only Burnet all the hair off my arm. After that I only used that fuel for stoves. Don't play with that it's not a good substitute for anything. Thanks for sharing but I think using that can lead to a similar thing, like my great idea 🤔
That was really interesting as well as informative. I laughed at the shiny bullets bit! Thanks for this. I've now subscribed. I'm rebuilding a few projects in the garage. Need all the advice I can get!👍
Thank You...
@@StevesSmallEngineSaloon Watching from Australia...
Steve you legend, I will be doing this from now on. Thank you so much.
You're Welcome...
Thanks Steve, I was trying to decide if I really wanted and needed one, this video is a pro
You're Welcome...and Thank You...
You're smarter than you like us to believe. Nice vid, with a good explanation of cavitation too. Enjoyable as always. Respect from UK. Edit: I suspect that the transducers blow, if you don't fill the cleaner, because there's not enough mass to absorb the ultrasonic energy, the transducer will vibrate more than it should and, un-dampened, will overheat and shake itself to a fault situation.The energy has to go into the water otherwise it has nowhere else to dissipate.
Great reason why you fill it. Thanks
Add harmonicas to your list! They tend to collect lots of grunge from the mouth and need frequent cleaning. The smallest vol ultrasonic will work.
Small safety tip. Don't put your hands into the cleaner when its on as the vibrations will badly effect your joints.
Nice tip!!! I'll give it try with jars and sockets. Thank You!
You're Welcome...
Great video! Personally I use mostly ziplock bags instead of cans. I've come to understand that thicker plastic jars, or baskets for that matter will absorb more of the energy and reduce efficiency of the cleaner. Stainless beakers also absorb less. A note on detergent and aluminium parts - strong alkaline solutions will dull and etch the surface
This is what I do.
May I ask what cleaning solution is best for anodized aluminum bike parts? Thanks
Most important with anodized aluminium is to keep the liquid slightly acidic, never alkaline/basic as that will ruin the surface. Most detergents are alkaline so either put some citric acid in as well, or use carosene in ziplock bag
Level 1000 genius. Best video I’ve seen on ultrasonic cleaners. Thank you!
Glad it helped
Very nice video Steve. I use my cleaner predominantly for cleaning my bicycle chain about once a month. First I rinse the heavy gummy lube off with paint thinner and then I use Orange Degreaser available at the Dollar Store. (I can not claim this idea as my own as I saw this elsewhere here on YT) But the idea works great for cleaning most dirty grimy greasy items. I could probably use the Orange Degreaser alone in a glass jar but maybe in two different applications to assure that I am removing all the grit present. Thanks again for the container idea Steve.
Beautiful two man saw on wall behind. I'm going to go 1850s on that one.
Also, be warned that you should check a list for what gemstones are ok to put in ultrasonic cleaners. Some are very susceptible to fracture due to frequency. (others are very safe) Additionally, if your gemstone has any post processing cleanups like gap filler or polish, it may take that out. Examples of very safe stones: Diamonds, zirconia Examples of risky stones: Emeralds (gap fillers), Quartz (Huge variance in quality of stones but can be very frequency sensitive and usually have surface treatments)
Thanks for this tip. I was wondering about cleaning it between the different things I will be cleaning. Thanks
You are so welcome!
Thanks Steve. A lot of great knowledge in your post. Does anybody use ultrasonic to clean chain saw chains? If so, what chemical do you use?
I have a 15 liter cleaner and when it gets dirty I clean it in my 30 liter cleaner. Now I need one to clean my 30. It never ends 😞.
You're an holy consumer for the buyers 😂
🤣
Sofa King Funny
Awesome tip, I'll use it for everything from standard garage type stuff to cleaning brass for reloading (if primers ever become available again).
Right on
I used to work in a shop where we would rebuild dollar bill validators and coin changers. We had several smaller ones and the big 5 gallon one. We used murphy's oil soap, and it left an oily film which was great for metal and plastic parts.
I’ve been following Steve for about a year and just found this. A lot of really good information. The guy that wrote about a vented weighted glass container. I wondering if maybe a smaller unit would work. Would it work as well? I’m going to do some digging and see if I can find a smaller one one and give these tips a try as I’m looking to clean small parts for now. Great job Steve and everyone else who joined the discussion, really a big help 👍
Good stuff!
Great vid. Steve, just bought one myself and found this very interesting and given me ideas of how to do things. As to the open topped containers you might try putting a couple of holes on opposite sides at the top and putting a stick or similar through said holes and across the tank top so you can run it longer without having to hold it yourself.
Great idea
You could use a magnet, huh? Just an idea.
Wow, my jaw dropped when you put the jar in the tank. That is genius ingenuity, Sir.
Thank You...
Great advice. I will eventually be able to use the ultrasonic cleaner which is under my kitchen sink
I've heard of doing this ("indirect" cleaning) but that was a great demonstration, and I'm amazed at how FAST the gasoline clean! Thanks so much for the video.
You're Welcome...
I use my old guitar strings for cleaning my jets works great and never use the air nozzle to clean carbs the pressure from the b12 can is plenty. I’ve done literally hundreds of carbs and this looks like a keeper wish I know about this years ago thanks man my sonic machine will be much cleaner
Right on! I also use guitar strings
Steve, I worked for Zama for almost ten years, and we used an ultrasonic cleaner nearly every day. We kept a mix of simple green and water, 50 / 50, in the tank all the time. Instead of plastic jars we used old coffee cups to put smaller parts in. Take off the gaskets, metering diaphragm, and fuel pump, and toss everything else in. If you can get the high low needles out, and have replacement Welch plugs, take those out as well and let 'er rip tater chip. The main nozzle and idle check valves won't be effected. When done, rinse with water, and then follow with denatured alcohol and GENTLY dry with compressed air. We would also put raw aluminum bodies, brass parts, and stainless parts in the same way. We learned that placing a piece of card board over the top of the basin kept the parts and the cleaning solution warm, which improved the cleaning processes. Never tried gasoline, OSHA might have frowned upon that, but I can see where it would work!
Right on Dan..
Hi What do you mean with green? Is it dish wash? Best R Henrik
@@henrikjonsson4340 Simple Green. It’s a cleaner / degreaser sold in the United States.
Be sure to use 90% or better isopropyl alcohol. Anything less is rubbing alcohol that has other added lubricants in it.
Just got my sonic in and this is exactly what I was thinking. Using it to clean resin 3D prints and don’t want to fill the whole vat with alcohol. Great video!
Thank You...
Great advice, worked great for my old XJS V12 injectors. Thank you. Mohammed from the UK
Right on
Great Video Mate ! Love the Idea of isolating the parts in plastic container How safe is it using petrol though I dont want to blow my shed up !
I use a mix of white vinegar, dish soap and water. Dish soap breaks down grease, white vinegar breaks down other dirt particles and water cause it’s a chap add in. I then use distilled water to wash it all off. I mainly clean circuit boards but that mix works well for jewelry and other items as well. 😄
Thank you for sharing. Saved me a fortune in cleaners. Cheers from over the pond. Subscribed.
Awesome! Thank you!
I'm going to start using my sonic cleaner for my rock finds. and the plastic or glass bottle tip? WOW! that's going to be the thing I get the most from. thank you!
Have fun!
ultrasonics create low pressure zones in the liquid, creating cavitation bubbles. The cleaning action comes from the collapse of the cavitation bubble. These things do work awesome. Great demonstration video! Keep the the good work.
Thank You...
I don't understand why the bubble would do the cleaning. Isn't it the sound wave that's doing it and the bubbles are a by-product of that? (cavitation). Mine wasn't bubbling any at all and stuff came out clean. I have a 2L.
I've just taken delivery of a new ultrasonic cleaner and this tip is bloody fantastic!! I restore old mountain bikes and there are always heaps of grimy rusty parts. I can just chuck them in a jar and pop it into the cleaner. Different jars with different solutions for different jobs. PERFECT!
Glad it helped!
i bought mine to clean my vinyl its amazing for that,now im taking it into the workshop as i have loads of tools and drill bits etc to bring back the newness ,great video ....
Cool!
I use simple green on my gun parts and it does a great job!
The reason you must fill the unit to the fill line is the resonant frequency is tuned to the volume of water at the fill line. If you use less liquid you will get poor cleaning or worse still, as you said already, you can blow up your ultrasonic transducer.
Yep, because the energy (of the vibrations) will not be used to move the cleaning solution, but will be thrown back at the sound generators, which will destroy them.
Since, you seem pretty knowledgeable regarding the topic, I'd like to ask you a question. To your knowledge, are all the transducers used in these small ultrasonic cleaners basically the same quality? I ask, because there is a price differential between the American manufactured ultrasonic cleaners and those made in China. However, I've heard that all of the transducers are made in China. So, I was wondering how I can judge the quality between the various manufacturers. I'm looking to use a ultrasonic in motorcycle and automobile restoration as a hobbyist Many thanks.
@Liam McNieve Somehow I don’t think 🤔 that’s the answer he was looking for.
@@azul8811 Interestingly enough, I’d like to know the answer to your question as well. I also know a thing or two about parts that are made in China because I actually lived there for more than a decade. In short people complain about the cheap stuff that comes from China without stopping to consider how all of that cheap stuff got here in the first place. One of the ways cheap Chinese products come into the U.S./Canada, etc. is the same way that Steve acquired his Co-X machine, and that is direct import (so yes, they do make cheap products to sell. Why? Because most people are cheap bastards and would rather buy cheap products and complain about it later). The other way cheap Chinese products wined up on retailers shelves is because the U.S./Canadian buyers that source from China are only interested in buying cheap shit to be sold at Walmart/Canadian Tire and the like. What most people fail to realize or acknowledge is that China also has great factories too, and just one example of that is the your Apple products. I certainly don’t see anyone complaining about how shitty their IPHONE is made. From what little I have been able to learn about these cheap Chinese units are that the failure points aren’t necessarily the transducers, but rather that push button circuit board that that operates the unit. That board is filled with really cheap chips, diodes, etc. The boards are what usually burns out or overheats because the heating elements gets taxed. They will likely last a bit longer if you filled them up with boiling water from the beginning instead of relying on the heating element to bring the water up to speed.
@Liam McNieve LOL. I try to when my budget can afford it. I bought two US made Wilton bench vises last year. One cost me $900, and the other about $600. I've been pricing out a US made Baldor 2 speed buffer with pedestal and it runs over $1200. So, do I buy a US made ultrasonic cleaner for over $1000, or a Chinese one for $169? It depends on how much use I am going to give it, and if the US ones are comprised of Chinese parts. One of the US made ultrasonic cleaners doesn't include the stainless steel basket even though it is a necessary accessory. They charge $250 for the basket alone. The other thing is that some stuff is promoted as Made in USA but is actually just assembled here of foreign sourced parts. Or think about cars. Do I buy a Ford made in Canada or a VW made in Tennessee? It's a similar case with clothing. There are still sweatshops here in NYC. There are undocumented people sewing foreign sourced fabric into blouses, etc. I believe that the labels say made in USA. So yeah, buy American. I'm with you on that, but it gets complicated.
I like this one. We have the same cleaner at our shop and there's been a lot of waste. Now we know how to cut that down. Thanks
Glad it was helpful!
Hey Steve, I really enjoyed your video and now I’m already planning to buy an ultrasonic cleaner, great video👍
Great to hear!
Awesome, now I have a few more methods to clean carb parts n even tools! Thanks
Glad to help
Great idea Steve! I use Simple Green Pro HD (purple in colour) On the bottle it gives a mix ratio for Light, Medium or Heavy duty application. I used it on Motorcycle carbs that had grease caked on them for 38 years and they came out beautiful. It was recommended for aluminum.
That stuff is the best degreaser. I soaked an aluminum engine block in a large tote filled with this stuff and water. It’s non-corrosive and removes all of the burnt oil and makes the aluminum look like new.