more information: stoppi-homemade-physics.de/pi...
Пікірлер
You make the best practical experiment and demonstrations!
@DeezNutz-ce5se Жыл бұрын
Thank's a lot, this is my goal 😉
@stoppi Жыл бұрын
Sounds very interesting! 👍😀
@bertondroid Жыл бұрын
The ones made by M. Heisenberg are blueish...
@cmuller1441 Жыл бұрын
😂or explosive...
@stoppi Жыл бұрын
Sehr cooles Projekt! Lässt sich der Kristall auch als (schlechter) Lautsprecher nutzen?
@Manawyrm Жыл бұрын
Hallo! Das müsste ich ausprobieren. Ich wollte den Kristall auch schon in einem Interferometer einbauen und schauen, ob sich das interferenzmuster bei anlegen einer Spannung verändert. Muss ich alles aber erst machen, komme aber aufgrund der vielen Projekte nicht dazu 😉
@stoppi Жыл бұрын
Top 😎👍🏼!
@gerd3136 Жыл бұрын
how many spoons of cream tartar you add exactly to the distalled water or you put all of 200g of the cream tartar?, and did you put soda ash until it becomes clear?? THANK YOU SO MUCH :3
@stariesh7 ай бұрын
Hello! As far as I remember I put all of the 200g of the cream of tartar into the 250 ml destilled water... After this you have to give spoon by spoon of the sodiumcarbonite (soda) into the water...
@stoppi7 ай бұрын
Can't wait
@sadiqnawazkhan3333 Жыл бұрын
Hello! I'll upload one video every two weeks, because I have now more than 50 videos waiting to be presented 😉
@stoppi Жыл бұрын
Do You have some kind of estimate what the displacement could be after applying voltage to it?
@rafapolepszyc1907 Жыл бұрын
Hello! Not really. I have a fabry perot Interferometer and when I supply the piezo disc with 1V then the movement is around 300 nm. This can be seen at the moving interference rings... Whether the displacement of the piezo crystal is in that range or smaller or bigger I can't say. I would have to insert the crystal in the Interferometer to check this...
@stoppi Жыл бұрын
@@stoppi cool, thanks
@rafapolepszyc1907 Жыл бұрын
hii, i did the steps exactly like how you did. but we always fail when it comes to the soda step. how often do we put it and do we need to constantly mix it? i hope we can overcome our problem, thank you so much for your answers and your advice.
@bicsuit7 ай бұрын
Hi! After the cream of tartar you will have to put the soda in the mixture. Do this spoon after spoon because it's bubbling a lot. With the spoon you have to mix it. After a while and several spoons of soda it stops bubbling when you add the soda. Then the mixture also gets clear. Good luck with your project
@stoppi7 ай бұрын
thank you so much!! @@stoppi
@bicsuit7 ай бұрын
hii! i see that you use pure soda instead of soda ash, but can i replace it with soda ash. thank you for answering. 😁😁
@bicsuit7 ай бұрын
Hi! To be honest I don't know. You will have to find it out by yourself. Good luck 😉
You make the best practical experiment and demonstrations!
Thank's a lot, this is my goal 😉
Sounds very interesting! 👍😀
The ones made by M. Heisenberg are blueish...
😂or explosive...
Sehr cooles Projekt! Lässt sich der Kristall auch als (schlechter) Lautsprecher nutzen?
Hallo! Das müsste ich ausprobieren. Ich wollte den Kristall auch schon in einem Interferometer einbauen und schauen, ob sich das interferenzmuster bei anlegen einer Spannung verändert. Muss ich alles aber erst machen, komme aber aufgrund der vielen Projekte nicht dazu 😉
Top 😎👍🏼!
how many spoons of cream tartar you add exactly to the distalled water or you put all of 200g of the cream tartar?, and did you put soda ash until it becomes clear?? THANK YOU SO MUCH :3
Hello! As far as I remember I put all of the 200g of the cream of tartar into the 250 ml destilled water... After this you have to give spoon by spoon of the sodiumcarbonite (soda) into the water...
Can't wait
Hello! I'll upload one video every two weeks, because I have now more than 50 videos waiting to be presented 😉
Do You have some kind of estimate what the displacement could be after applying voltage to it?
Hello! Not really. I have a fabry perot Interferometer and when I supply the piezo disc with 1V then the movement is around 300 nm. This can be seen at the moving interference rings... Whether the displacement of the piezo crystal is in that range or smaller or bigger I can't say. I would have to insert the crystal in the Interferometer to check this...
@@stoppi cool, thanks
hii, i did the steps exactly like how you did. but we always fail when it comes to the soda step. how often do we put it and do we need to constantly mix it? i hope we can overcome our problem, thank you so much for your answers and your advice.
Hi! After the cream of tartar you will have to put the soda in the mixture. Do this spoon after spoon because it's bubbling a lot. With the spoon you have to mix it. After a while and several spoons of soda it stops bubbling when you add the soda. Then the mixture also gets clear. Good luck with your project
thank you so much!! @@stoppi
hii! i see that you use pure soda instead of soda ash, but can i replace it with soda ash. thank you for answering. 😁😁
Hi! To be honest I don't know. You will have to find it out by yourself. Good luck 😉
wow
How long do you wait until it becomes crystal?
Approximately one day...
KZhead didn't notify me of this video 😮