I Bought 3 Exotic Cars that Retailed over $700,000 and got 75% Off because of the Car Market Crash!
2023 ж. 27 Жел.
423 545 Рет қаралды
Visit airup.link/samcrac-december to get your own air up water bottle today! #airuppartner #airup
Instagram: / samcracc
Facebook: / samcracauto
Email Me: SamcracAuto@gmail.com
From pizza delivery cars to Ferraris, what a life.
The Dominos series were great. He’s come a long way!
Sometimes crac pays
Big facts man saying you could buy them just like that yeah right.
@@GlazzedDonut True words 👍🏼
Pizza car put him on the map, would like to see a recap or update, like does he still have it or what?
You know what is the greatest lesson here? No matter how big or small you are, you are never too good for Harbor Freight tools. Sam needs more HF sponsorship for sure.
😂
@@Samcrac @Siasax took him 10 years to get a lift, will take another 10 to get a set of tools
@@VaporEG well if its going to take 10 years we will probably watch him restore multiple Ferrari, Mclarens, or rare domestics, or even watch him beat rich over the head with more HF tools for a long time then.
Didn't know u still had the dominoes delivery car
This dude needs rehab for sure
Ive been watching Sam for years and can't recall him ever finishing a project.
Literally but still entertaining
Same
So true.
He’s certainly not VTuned that’s for sure. Ben has his cars half fixed on the first video and they are done in a couple of weeks.
I think the pizza car is the only one
I hope 2024 is the year that at least one car gets completely done!
In my opinion I think the videos fixing the older exotics is extremely interesting and fun to watch. A lot of people would never buy old out of warranty exotic and when you buy them and fix them it shows people you shouldn’t be to scared to take on a fun project 😂
Especially when Ferrari wants $4700 for a fix or part and you fix it with a harbor freight tool and you’re only $36 into it 😄
I would 3D print the surround and replace the radio with a modern one which would be lighter. The plastic below probably just need the plastic clips rebuilt.
Yeah, modern ones don't have a cd changer/player inside and are only a face about 1 1/2" deep and weigh nothing. For what it's worth, I don't know why they even sell aftermarket stereos, you have everything it does in your cellphone. All you need is the headphone jack and the usb and a way to hold it in the dash. for that matter, you could also just use a 7 or 8 inch cheap tablet, that would do all the same things. Just velcro it to a flat piece of plastic.
I wonder if Ferrari is still using that rubberized plastic that turns to sticky goo after a few years?
For a "faux classy" look you can also get that Carbon Fibre wrap to go around the 3d printed surround as well as around the buttons.
@@Bicketybam68 You could also do a dip.
@@scottyV1000 I was wondering that myself....probably. If nothing else Ferrari isn't big on fixing problems.
I finally understand what ur doing Sam. At first I didn’t but now I realize it. Keep up the good work keeping ppl informed. 👍🏾
It is good to see the car inventory and hear the updated stories behind them. I always a little confused with this channel. There will be a couple of videos on a particular vehicle, but we're sometimes left hanging as to how the issues are resolved with the repairs, if he sold them, or gave up on them, etc...Look forward to next year here.
I agree with this statement. But hearing about the problems and the knowledge he has is the real value here.
In a time where it feels like we need at least $70,000 for a fun sports car, I think it’s absolutely amazing to see how you solve what should be complete nightmares with just a bit of ingenuity. From cross referencing mundane parts to rebuilding a turbo kit in your garage, you’re consistently showing us that we can escape expensive bills and headaches with a few minutes of thinking outside of the box and some elbow grease.
Follow you because of your diverse car collection. Agree, ship half of them out.
The obsession with cars is not mutually exclusive to you, there are a lot of us in similar situation. I have 23 in my “unicorn” collection , 3 of them former KZheadrs cars, too! Thanks for sharing!
The most impressive part of the video, is how the cows didn't destroy yet most of the cars. They must be too distracted to what car to use as main scratcher.
I had a friend who owned several nice collector cars and he lost his storage so he used his Dads field temporarily and yup the cows caved in nearly every panel they could get to.
@@toddaulner5393 Exactly.
Pull the radio surround out glue it together and scan it and 3d print it. For sure that is probably the best way.
Sam using the new car lift, as some of us using home gym equipment to hang on clothes.
It's definitely weird how he works in the middle of a field, when he's got a lift 😅 And that's why we watch
@@anonymouse7074 Or the cows using multiple cars on the field, as fancy scratchers.
@16:58 - we fixed similar issues with getting the old part, 3d scanning it, then printing it in our lasting, then casting an aluminium mould from it. It takes time, but it works. (Admittedly it’s for industrial equipment, and not a Ferrari) 😂
I’m a college engineering student, happy to help you model and print a new media surround.
Poor pizza car neglected we need a revival video on the pizza car please love the content man keep it up
It needs a bath!
🚦Got darn Sam so many new projects for the new year…Kudos to you brother
So much trash on that farm 😂😂😂
Finishing a car and detailing it for an end shot would improve the channel for sure.
Can't wait for the updates - Merry Christmas Sam !!
Best channel of all the carboys! Hoovie, Tavarish, Legit. Rich keep it real like your guy Samcrac!
I appreciate that
Hoarding is so easy when you have the means and the storage space. I feel you
Love you Sam and happy new year!!
Happy New Year to you Sam. And everyone you hold dear too!
I did a s65 amg abc to coilovers conversion. When done properly it was an amazing ride after . ( additon of sway bars, non abc steering pump etc.) But after selling the abc pump, valve blocks ans the shock as cores, the conversion was under 1000
Keep on keeping on Sam……living our dream ❤😎
Congratulations Sam! Happy Hannukah!
If you aren't going to build a big garage for all these cars, will you at least park them together??? It's freaking me out! 😄
Damn, Sam on crac with all these cars. Much more than I remember, and I've been watching for years
Sam for the love of God please build a big shed/barn to keep these babys out of the sun👍 Your a exotic car farmer😂 Love your vids!
Great to see,how something so entertaining can get out of hand,happy new year,happy selling.
You finally got something worth watching. Love it!
More cars then animals at SamJurassiCrac Park 🤣🤣🐔🐔
When my dad passed he left me 42 cars, not one could be started and driven, he said he would get to it. This is Pure Crazy never let it happen to you or your kids.
I love watching all your videos Sam have a Happy New Year . Look forward 2 your next videos.
Happy new year, to The Samuel!!
I'm so happy to hear you are keeping the zr-1
Regarding the potentiometer for the F430 i bet that Dan from NormalGuySuperCar will have one somewhere as he was in the manual conversions before and they remove all that stuff and throw it in the parts bin
10:07 I love that you still have it.
Only solution I can think of on the 612 Bezel situation is good CAD skills and a 3D printer. Honestly, at this point for cars with trim parts that aren't made any more, 3D prints are probably the only solution that won't cost multiple thousands.
Dang Sam it’s like you have a life size collection of hot wheels 😂
They've all been stomped on and left in the yard too.
I'm a delivery driver and it makes me sad to see the domino's car being neglected. 😢
Sam, I feel your pain. I'm the same addiction buying motorcycle 'projects'. You and I need to understand the buying opportunities will always present themselves anytime AFTER we finish our projects. Your subscribers will be just as happy to see your content shift to repairs for a bit, then pick up on fresh purchases later. In the meanwhile, I'll watch whatever you put out for us, cheers from Australia and Happy New Year!
thank you and have a happy new year
Always a great watch 👍👍
Sam you got to build yourself a nice big shot that you can store all these cars in you have so many beautiful cars and when you leave them outside on the Florida Sun it's just heartbreaking to see
Nice haul Sam! Your mechanical skills have got to pro level. You got this under control.
I love that you still have your fuck off pizza delivery car! keep on keeping on Sam, I love your content. Happy New Year!!
That red v12 Ferrari and white moldy amg are keeper dream cars hope you can fix the gearbox
Bloody hell, you've got so many vehicles. Do you have fleet insurances or something?? :-) I'm sure you've noticed the lower control arm bushing is pretty torn. Happy you got the Bilstein shocks, but you should get that taken care of. I'm sure you can find the center bezel for the 612 somehwere on the used market. Pretty sure you can get a more modern 2DIN unit to replace that ancient Kenwood. As for the 430, yes, get the manual conversion. There's no question that's the better way to go. Manual swap anything wit the rubbish F1 system. Not only will they make them more reliable, it'll increase the value of the vehicle. Hope you had a great Xmas and if we don't hear from you soon, Happy New Year!!
I'm awaiting a few control arms for the Porsche!
Wow Sam! I didn’t realize you had this many to work on at one time. 2024 is definitely gonna be a heck of a year for you and a fun one 👏🏽👊🏽😃
Great video Samuel!
Admitting you have a problem is the first step. Looking forward to following your progress. You're videos are always interesting.
Man that’s a lot of cash for the “unknown” I hope Sam can fix and sell them all!!!
Let's be honest, if he gets one of them fixed up that would be impressive
3d printing is your friend. Have someone scan it and print it out of ABS or a carbon fiber mix filament. Should be cheap and easy.
Happy New Year Sam & Team🎆🎆🎆 Looking forward to the new garage😍😍😍
There has to be love of cars otherwise you're right it's a WTF do I do now. Call the tow truck to the junkyard
I would solve that problem by first getting a joybring 7 inch double din it’s super light and about 120$
Glad to see you keeping the ZR-1. The Ferrari California looks fantastic. It is an open car with automatic top. Fantastic!
Nice cars, lots of work left to be done!! Your hands show all the hard work you've been putting into them !!
I wish to you a huppy new year sam.greetings from Greece.
Start hiring workers Sam, bang those video out and make a great 2024 for us in car content!
I’m the 500th person to view this video, after being posted for only a few minutes!?! Way to go Samrac
Great video I’m definitely here for the long haul
I can relate with the amount of cars and the issues that come along with it. It becomes a full time job just trying to do maintenance, keep the batteries up, and fix issues with them.
Hard to beat that collection. The Sl or the AMG GT are kinda my favorite of all of them. But I would love to have a C7 too.
@@chir0pter I am talking about the Mercedes Sl and GT. 🤣
@@WildDigger Fair, I was calling the California a Ferrari SL pejoratively. I didn't watch the video
No worries Sam! We’re happy to help enable your addiction!
Love the field tour, Sam. Definitely some great buys! Love the McLaren. Hmmm...
Can’t wait to see the videos this coming year
Still got the pizza car there. Very nice.
Loving that videos are being dropped with more frequency...
15:40 is a dream come true. Audi R8 & Ferrari F430. 2 of my favorite cars ever.
For the Ferrari dash, scan it, then have it CNC machined out of your choice of metal. Probably cheaper, and definitely stronger. Different types of prototyping and other shops would be happy to do it.
I'm just waiting for one of these days that Hoovie sends something off to Copart and Sam manages to find it haha.
I love this channel but why not a huge garage for the channel I think the channel would blow up even more
Regarding using the same parts across different marks, the brake and gas pedal rubbers are made the same place for all VAG cars, I know that because I work in the mould factory that make the moulds for the "expencive" rubbers (with the stainless inmolds) in fact I moulded the very first pedals for that Bentley back in january 2016 We make molds for VW, Audi, Porsche and Bentley.
For the 612 stereo/ac bezel - I think investing in a 3D printer (or having a friend with one) is going to be your best bet. I'm sure the schematics are available somewhere. Maybe upgrade the stereo to something newer/lighter and with all the newest tech.
Can you get the radio surround 3D printed?
Rule #1: Nothing ever leaves the farm!
Great video sam
Great lawn ornaments 👍
You need a big garage to keep those cars in
wonder how much Sam now owes to Stepmum after buying this lot?
We all miss her
@@andymudhoney what has Sam done to her? Or has she disowned him?
I think he is happy to 'service' that debt as required.
I'm sure she lets him pay in some way. Poor lad.
I think that finishing the manual swap you started and doing the other one just afterwards so you have fresh memory would provide us really interesting content and serve you a good purpose
The 612 Scag!!! OMG!! After it was painted, I never heard about it again. Please do a 2-3 minute update and quick drive when possible.
It was never painted!!! All original, except that radio lol
Sam needs an intervention 🤣
hey would love to have anyone of these cars
You have a very nice piece of property. Really love the channel.
Regarding the plastic Kenwood radio surround(approx 16:40) have you considered getting it remanufactured by a parts printer? Folks that do that can recreate common and complex plastic parts. Depending on the rarity of the part required it can be SIGNIFICANTLY cheaper than trying to buy a rare exotic car part on the open market from a diminishing supply pool. It can also give you another advertising stream by featuring multiple reputable 3D printing manufacturers that have figured in the success of getting your car projects repaired and ready to drive! Good Luck!
Sam: surely the Bentley is Stepmom's new daily? She's probably making the monthly payments anyway...
That McClaren is trash. Those cars are litterally nightmares and some parts aren't attainable on secondary markets because everyone has failed. If electrical issues it's a dump.
I keep loving the Corvette ZR1. Love the color and history and just has come character. Would love to see it get more love and see it driven.
I know the feeling on a smaller scale. A few years ago i had multiple VW's, a couple of trucks and my motorcycle. I knew i had a problem when i started keeping my key fobs in a fish bowl and would reach in and grab a fob with my eyes closed to determine what i drove that day. Now I'm down to two Jettas, an F150 and a Kawasaki 🥴
100th anniversary edition Bentley didn’t last 5years??🤯
😂
*Thanks for keeping us updated! I feel sympathy and empathy for our country low income people are suffering to survive, I appreciate Yetta Cox alot, you've helped my family with your advice! Imagine investing $2000 and receiving $9,460 in 5days*
Things are getting worse these days, if you don't find a means of multiplying your income you might wake up one day to see you didn't plan well for yourself and family.
Thanks Michael Angelo for recommending Expert Yetta Cox.
I just withdrew my profits days ago, it was so shocking when I withdrew $12,450 knowing I invested $3,500. I wish I could reinvest but, too many bills.
Same, I operate a wide range of Investments with help from My Financial Adviser. My advice is to get a professional who will help you, plan and enhance your management skills. For the record, working with Expert Yetta Cox, has been an amazing experience.
*SHE'S MOSTLY ON TELEGRAMS APPS WITH THE BELOW NAME*
Thank you for the update
Bro your videos is amazing motivates me
Sam buys cars and has little to no time to even fix them 😢
Now i understand why your wife left you
😂😂😂
Looking forward to the 12c videos!
Hapy new year sam. Sell them cars