KZhead
Тәжірибелік нұсқаулар және стиль

NEW YS3M 3X3 Unboxing / 5-AXIS PENTAHEDRONS / TENGYUN V3 | SpeedCubeShop.com

J Perm
2024 ж. 16 Мам.
487 221 Рет қаралды
Жүктеу

I leave for just a few months, and now there's BALL CORES?? Pentahedrons (triangles)??? ShengShou made the greatest 3x3 of all time???? I guess I'll stick around then...
My Main 3x3 Cube ► JPerm WR M MagLev:
speedcubeshop.com/products/jp...
SpeedCubeShop ► speedcubeshop.com
Using the code "JPERM" supports my channel and also gives you a discount on your order.
Product List ►
MoYu HuaMeng YS3 M: speedcubeshop.com/products/mo...
GAN Halo Smart Timer: speedcubeshop.com/collections...
ShengShou 2-Layer Pentahedron: speedcubeshop.com/collections...
ShengShou 3-Layer Pentahedron: speedcubeshop.com/collections...
DaYan TengYun V3 M: speedcubeshop.com/collections...
DianSheng Solar S3M: speedcubeshop.com/products/di...
ShengShou YuFeng M: speedcubeshop.com/products/sh...
MSCUBE MS3X: speedcubeshop.com/collections...
Other stuff mentioned ►
MoYu RS3 M: speedcubeshop.com/products/mo...
JPerm RS3 M: speedcubeshop.com/products/jp...
JPerm WR M MagLev: speedcubeshop.com/products/jp...
GAN 13: speedcubeshop.com/products/ga...
Buying anything here helps to support my channel! ► speedcubeshop.com/collections...
Beginner:
2x2 Tutorial ► • Learn How to Solve a 2...
3x3 Tutorial ► • Learn How to Solve a R...
4x4 Tutorial ► • Learn How to Solve a 4...
5x5 Tutorial ► • Learn How to Solve a 5...
Special Tutorials:
3x3 One Handed ► • Rubik's Cube: How To S...
3x3 Blindfolded ► • (New) How to Solve the...
Advanced Tutorials:
2x2 ► • How to Get Fast at 2x2
3x3 ► • Beginner + CFOP Method
4x4 ► • How to Get Fast at 4x4
5x5+ ► • How to Get Fast at 5x5...
F2L Algs ► bit.ly/bestf2l
Patreon ► / jperm
Merch ► teespring.com/stores/jperm
Algorithm Trainer ► jperm.net
Written Tutorials ► jperm.net
My PB Sheet ► bit.ly/JPERMPBS
Special thanks to these generous Patrons:
hiimjustin000, Levi Post, Erika Greggs, Enoch, Lincoln Matthews, Lego Aggelos, DotLucas, Talen, Khang Tôn, Cubing for Eternity, kubesolver, Gregory Martin, KingParity, James Moore, Milo, Connor Poto, Easton Wright, Pascal Mehling, Gideon Dalum, Kelvin Kxxx, Anthony Jiang, Bob, Kimi, Emiel Decorte, TayTaySwizzle, Kyler Smith, TheRealMayson, Donut Delivery, Ben, Jamie Bloom, Christopher Brooke, BLAZE55, Prajot Singh, Nurse Prime, Chris Bonnello (Autistic Not Weird), Dmitri Shabes, Pontus Uggla, Bobnova, Hoang Nguyen, Nathan Hoffman, Jan Strohbeck, Méga Watt, Atzel Flores, _geeky_guy_, Benjamin Handelman, Eleanor Violet, Todd Sullivan, Mike Field, Matt Pagett, Devonix, Ray Wu, Wesley Brenner, Supple Wrist72, Jared Smith-Mickelson, Sean Coetzer, senders, panda_pajama, kyle, Dominic Klyve, Andy Henline, Bob Brantner, Stanley Wesley, Mark James, RedKB, Chris Cobb, Martijn Schiedon, David Brown, Mike Sampson, YILDIZ KABARAN, Rob Peters, Philippe Schwartz
Music:
Kaleido - In Between
Artificial Music - Faithful Mission
Aries Beats - Neowise
Alex Productions - Lines
Sakura HZ - Chill
Mikel - Dark World
ZTD - Lounge
ZTD - Reminiscence
FSM Team - Melancholia
0:00 Emerging from my slumber
0:42 YuSheng3M
3:41 YuSheng3M MagLev
6:12 YuSheng3M MagLev BC
10:00 10-Axis 5-Layers Cubes
13:00 Hoping my mom gets a new main
15:06 Yn't S3M
15:59 Legendary YuFeng3M
18:02 MS3X sure is a combination of symbols

Пікірлер

  • Hey everyone, thank you all for being patient during my break! Only a few hundred people asked if I died :) Please let me know what I missed while I was gone!

    @JPerm@JPerm Жыл бұрын

    • First reply can I get a hi?

      @Potatocubing@Potatocubing Жыл бұрын

    • hey yournot dead

      @z4cubing170@z4cubing170 Жыл бұрын

    • Yiheng wang

      @fnravi@fnravi Жыл бұрын

    • I'm kinda returning again to cubing bcuz I kinda missed it...

      @shannmarkabuan4448@shannmarkabuan4448 Жыл бұрын

    • Hope you can read chinese!

      @manfredi19@manfredi19 Жыл бұрын

  • So good to have you back! 🎉

    @Tingman@Tingman Жыл бұрын

    • First

      @parnluong885@parnluong885 Жыл бұрын

    • Tingman!!!

      @Elijahthecubeyboi@Elijahthecubeyboi Жыл бұрын

    • I'm glad tingman enjoys jperm videos!

      @PenaltyCuber@PenaltyCuber Жыл бұрын

    • Wow very little likes and replies

      @anandpalshikar2528@anandpalshikar2528 Жыл бұрын

    • Hello tingman

      @YouCube-HS@YouCube-HS Жыл бұрын

  • Your cube reviews are always the highlight of my day!

    @poultrymansbiggestfan3133@poultrymansbiggestfan3133 Жыл бұрын

  • It's great to have you back! I'm excited to see what new videos you have in store 😁

    @mrutherford1106@mrutherford1106 Жыл бұрын

  • When the world needed him the most, he returned.

    @eter1650@eter1650 Жыл бұрын

    • This dude comes back right after I come back from a long break😂

      @Yourfriendlyneighborhoodcuber@Yourfriendlyneighborhoodcuber Жыл бұрын

    • Yes

      @SpiralShape@SpiralShape Жыл бұрын

    • And the first BIG youtuber to review ys3m

      @bavankarthik7634@bavankarthik7634 Жыл бұрын

    • when the world didnt need it, you reposted the most annoying message.

      @LuukZOld@LuukZOld Жыл бұрын

    • @@LuukZOld Yes I did.

      @eter1650@eter1650 Жыл бұрын

  • The Cubing World is not the same without you, J Perm. It's so good to have you back ❤😊

    @arthurlima7828@arthurlima7828 Жыл бұрын

    • True

      @Torden-Thor@Torden-Thor Жыл бұрын

    • Thank you, it means a lot!

      @JPerm@JPerm Жыл бұрын

    • @@JPerm what cube do you main?

      @diyspiritedwill4536@diyspiritedwill4536 Жыл бұрын

    • That's what I said lol I got so bored of cubing without J Perm

      @bigdoge@bigdoge Жыл бұрын

    • @@diyspiritedwill4536 he said in the video :/

      @1CubedALT@1CubedALT Жыл бұрын

  • It is so fun getting a new unboxing video after SO LONG. Thank you Jperm. 🙏🙏

    @gw2156@gw2156 Жыл бұрын

  • Lesss gooooooooooooo hope your break was worth it and as always delivering one of the best or even "the best" content for cubing you have done a lot for the cubing community and introduced many to cubing you are a living legend to cubers

    @AdventureCJ@AdventureCJ Жыл бұрын

  • feels so good to have jperm back

    @_cinnamoon_@_cinnamoon_ Жыл бұрын

    • Indeed

      @SpiralShape@SpiralShape Жыл бұрын

    • Ik

      @Cubestar123@Cubestar123 Жыл бұрын

    • feels good to be back :)

      @JPerm@JPerm Жыл бұрын

    • So true

      @Torden-Thor@Torden-Thor Жыл бұрын

    • I know!

      @TheTutorialDrawer@TheTutorialDrawer Жыл бұрын

  • “I never choke… I ONLY CLUTCH” - Jperm Another incredible Jperm quote to remember 😂😂😂

    @CJisTheOne1@CJisTheOne1 Жыл бұрын

    • there r gonna be sooooo may coments ab that

      @premierturf3305@premierturf3305 Жыл бұрын

    • Do understand the meaning 😥👄

      @Artandcubing@Artandcubing Жыл бұрын

  • Welcome back !! I came to your channel multiple times between your break and I can say that cubing is incomplete without you ❤

    @IshanGayal@IshanGayal Жыл бұрын

  • I genuinely felt a surge of excitement and I quietly whispered out “yeah” multiple times when I saw you upload Very happy to see you back JPerm!

    @sarlo151@sarlo151 Жыл бұрын

  • J PERM'S BACK. It's so good to see you back man. I hope you enjoyed your break. We all missed you, but thank you for making content and never feel rushed or pressured for making us content :)

    @Doraemon-xi4vc@Doraemon-xi4vc Жыл бұрын

    • Same, thanks to him I evolved from 1:30 average to 40 and still improving

      @ninja47yt64@ninja47yt64 Жыл бұрын

    • W JPerm from England

      @Lukedamow@Lukedamow Жыл бұрын

    • I really thought he had got a bit involved with work and girlfriends and stuff and had given up cubing!

      @PreservationEnthusiast@PreservationEnthusiast Жыл бұрын

    • Reach into your 4 dimensional pocket, and let me borrow your Anywhere Door and Translation Jelly please.

      @conaldeugenepeterson2147@conaldeugenepeterson2147 Жыл бұрын

    • YES!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

      @judeguthrie3261@judeguthrie3261 Жыл бұрын

  • Jperm! You made my day by uploading and I hope you feel better 😊 can't wait for some sick content 😎

    @TokaCubing@TokaCubing Жыл бұрын

    • Definitely feeling fresher!

      @JPerm@JPerm Жыл бұрын

    • @@JPerm happy to hear!

      @TokaCubing@TokaCubing Жыл бұрын

    • Same Every word

      @Redstonefox7245@Redstonefox7245 Жыл бұрын

    • Agreed!

      @bigoofersrock@bigoofersrock Жыл бұрын

    • @@JPerm Finally feeling like a cuber back again😃

      @World_of_Cubing@World_of_Cubing Жыл бұрын

  • I was waiting for a new J perm video for months. Thanks for coming back J Perm . Your the best cuber.

    @challengermasters1716@challengermasters1716 Жыл бұрын

  • Thanks Jperm its good to see you come back as you are the one who helped me learn 3x3 and 4x4 and many other puzzels i even bought the rs3m 2020 and the wrm maglev because you had those and its safe to say i do not regret my decision thanks for uploading again

    @paradebu1603@paradebu1603 Жыл бұрын

  • I quit cubing around the same time you took a break, and now I’ll come back - thanks for coming back Dylan ❤

    @ohypix@ohypix Жыл бұрын

  • Can't express enough how happy I am for you to feel well or at least not as burned out! Welcome back JPERM!

    @doctor_marques@doctor_marques Жыл бұрын

  • we've missed you so much! I went to my first competition a month ago, and your entire channel is the reason I even had the confidence to do it. It's good to have you back, JPerm

    @jay.tres.@jay.tres. Жыл бұрын

    • Another epic video to mark the return of one of the greats

      @SqrRaptor7@SqrRaptor7 Жыл бұрын

  • I literally cried when I got the notification that J Perm had uploaded a video. It's really good news to know that you're back !

    @sighter__speedcuber@sighter__speedcuber Жыл бұрын

  • JPERMS BACK! It feels so good that you’re finally back, I hope you enjoyed your break, you deserved it.

    @gamingwithkacper@gamingwithkacper Жыл бұрын

  • The King of Cubing is back with a bang 🔥🔥🔥

    @codyandersan@codyandersan Жыл бұрын

  • Hi thank you for the easy-to-understand tutorials and helping me solve my first cube😊

    @danielwusy@danielwusy Жыл бұрын

  • WELCOME BACK!! when i saw this on my homepage i was jumping up and down with joy

    @silobean@silobean Жыл бұрын

  • I knew YS3M would bring Jperm back! Welcome back Jperm. Wish you always 'sun tai geen hong'. Keep healthy. There was a void in youcubing when you were away. Great see you back anyway!

    @mustseenow991@mustseenow991 Жыл бұрын

  • HE'S BACK!!!!!! Immediately I saw the notification, I left everything I was doing to watch it. Thanks J perm

    @ghcuber6613@ghcuber6613 Жыл бұрын

  • J Prem I wouldn’t have started cubing without your amazing videos and to tutorials 🎉🎉🎉

    @Cubing_Nerd@Cubing_Nerd Жыл бұрын

  • It’s great to see you back JPerm! Hope you enjoyed your much needed break!

    @QbedQber@QbedQber Жыл бұрын

    • What should i buy super rs3m standard or rs3m 2021

      @darkpatcher4163@darkpatcher4163 Жыл бұрын

  • I yelled a "YEEEEES" out loud when I was notified of a new video! Thank you Jperm for being awesome! We all missed your videos!

    @bananacuber02@bananacuber02 Жыл бұрын

  • Nice Unboxing!

    @CubeForSpeed1@CubeForSpeed1 Жыл бұрын

    • FIRST REPLYYY

      @racingenthusiast9292@racingenthusiast9292 Жыл бұрын

    • Cube for speed!!!!

      @edwin_pig@edwin_pig Жыл бұрын

    • Yoo speed

      @CreeperKING-he2kk@CreeperKING-he2kk Жыл бұрын

    • cfs 🤢

      @ignDart@ignDart Жыл бұрын

    • Get a WR right now cube for speed!

      @vincentbangert6619@vincentbangert661910 ай бұрын

  • So happy u r back thank u for coming beack🎉🎉🎉🎉🎉

    @neresharamlall2549@neresharamlall2549 Жыл бұрын

  • As soon as i saw your video I closed every background app out. So happy you`re back!

    @vixexxfn2068@vixexxfn2068 Жыл бұрын

  • I have waited for so long. You're the one that inspired me to start cubing. Awesome Content btw 😀

    @Cubix250@Cubix250 Жыл бұрын

  • Damn he opened the ys3m glass box without any difficulty 0_0 He's the chosen one

    @alonecloud9607@alonecloud9607 Жыл бұрын

    • yes

      @DCuber196@DCuber196 Жыл бұрын

    • yes

      @jacobsparkstudios528@jacobsparkstudios528 Жыл бұрын

    • yes

      @HPT69420@HPT69420 Жыл бұрын

    • yes

      @JPerm@JPerm Жыл бұрын

    • yes

      @gw2156@gw2156 Жыл бұрын

  • Glad to see you back. I hoped you'll make a full video for the MS3X, this was too short :D Welcome back, and hope you're doing well

    @Flib_smmh@Flib_smmh Жыл бұрын

  • I actually stopped cubing after you paused but just started back up glad to see you back I genuinely leaped for joy when I seen you posted

    @lyannstreifel5554@lyannstreifel5554 Жыл бұрын

  • 4:00 I’m pretty sure this is actually a misconception with maglev cubes. It makes sense that theres less friction in the core because of the maglev removing it, but it shouldnt really be noticable since the radius at which the friction from springs would be is only a millimeter or 2. Im think the main reason maglev cubes are faster is actually because of the rate the magnet force increases being inverse square instead of linear. If people adjust the maglev/spring compression to be similar, they might make it so the force is the same when the magnets/springs are more compressed. Since magnet force increases faster, that will mean there is less force than springs at the least compressed state, and therefore less friction on the pieces.

    @ethancho1@ethancho1 Жыл бұрын

    • This is true. However, I have noticed a very small amount of friction with springs rubbing against the cube which maglev eliminates. The biggest difference for me is the noise. Maglev cubes are often much quieter than the spring alternative.

      @microsoftrock@microsoftrock Жыл бұрын

  • THE LEGEND HIMSELF IS BACK!! I hope you had an amazing break and you're feeling refreshed Dylan! ❤

    @JFCUBING@JFCUBING Жыл бұрын

  • So glad to see you back!

    @juliakuok@juliakuok Жыл бұрын

  • It’s so good to have you back, I missed you so much

    @zizzo1163@zizzo1163 Жыл бұрын

  • I was thinking a couple days ago, if J perm comes back he will review the ys3m. and a couple days later this actually happened lol. Thanks for teaching me how to solve the cube and teaching me speedcubing.

    @lexachu_@lexachu_ Жыл бұрын

  • We missed you so much sir Dylan, your absence was being felt by everyone in the community.

    @amarnathbanerjee5312@amarnathbanerjee5312 Жыл бұрын

  • Welcome back J Perm! I was happy when I saw a new video notification from J Perm. Can’t wait for your future videos! Love you J Perm ❤

    @yT___024@yT___024 Жыл бұрын

  • It's good to have you back Dylan!

    @islavilladelrey5148@islavilladelrey5148 Жыл бұрын

  • The whole cubing community will have to agree that we missed j perm It's sooooooo great to have you back Dysprosium Sodium Lithium Missed the "Hope you can read Chinese"

    @albusdumbledore9345@albusdumbledore9345 Жыл бұрын

  • Hey, J Perm. It would be cool if you did a seperate review on all Tornado V3 M versions. Glad you’re back

    @Didyus@Didyus Жыл бұрын

    • And the gan 13 And the super rs3ms And the ys3mss And yiheng wang

      @Adi_Cubes@Adi_Cubes Жыл бұрын

    • @@Adi_Cubes lol true

      @superstar308_@superstar308_ Жыл бұрын

  • Glad to have you back. You are my favorite KZheadr.

    @mpryme@mpryme Жыл бұрын

  • Glad you're back J Perm

    @Democracyofficer12@Democracyofficer12 Жыл бұрын

  • So glad you're back! Even if cubing isn't your thing as much anymore I'm here for your personality and love your videos

    @austins161@austins161 Жыл бұрын

  • Are you going to make a video on Yiheng Wangs wr? I would love to see that. Welcome back bro we missed you!

    @RimRookies@RimRookies Жыл бұрын

  • I’m so happy your finally back!!!!!🎉🎉🎉

    @DeepCubing123@DeepCubing123 Жыл бұрын

  • Glad to have you back.

    @carltschetter9995@carltschetter9995 Жыл бұрын

  • omg im so glad youre back. hope you're feeling better!

    @hunter-yt4eq@hunter-yt4eq Жыл бұрын

  • As usual, awesome! So happy you are back. We all know you had a little time away, but I hope you realize that you can do this stuff better than anybody else. Don't you see yourself hosting a podcast type show, with interviews, history and cube culture? 💪

    @mikebozik@mikebozik Жыл бұрын

  • YESSSS IM BEEN WAITING FOR A NEW JPERM VID, WELCOME BACK

    @timysamaniego9768@timysamaniego9768 Жыл бұрын

  • THE RETURN OF THE KING!!!!!!!!! I have been waiting so long for this. Thank you so much JPerm. 😊😊😊😊😊

    @moonsteel266@moonsteel266 Жыл бұрын

  • Good to see you back on youtube. Opinion on new wr 3x3 avg?

    @Maxiie_TM@Maxiie_TM Жыл бұрын

  • When I was checkin my subscribed channels and saw video on yours my ❤ went from 70bpm to 150bpm because of I have waited this alot. Thank you for making my day good✌️

    @mirojaakola9703@mirojaakola9703 Жыл бұрын

  • Love u Dylan We waited for u so long and now u came back!!!!!❤️❤️❤️💯💯💯💯

    @Krishna-kv1in@Krishna-kv1in Жыл бұрын

  • HE'S BACK!!!! J PERM!!! ❤❤❤

    @nezugt@nezugt Жыл бұрын

    • ❤❤

      @SpiralShape@SpiralShape Жыл бұрын

  • Glad you are back man. Hope you had a good break! Are u gonna make a video on Yiheng or is it too late?

    @InxyCubes@InxyCubes Жыл бұрын

    • i dint know that his mom cubes too

      @shadmanoor5992@shadmanoor5992 Жыл бұрын

    • @@shadmanoor5992 Yeah lol!

      @InxyCubes@InxyCubes Жыл бұрын

  • Miss you so much to be honest. One of my routine in surfing KZhead is watch your video. Some videos I've watch multiple times. Good to have you back.

    @truongnguyennhat8983@truongnguyennhat8983 Жыл бұрын

  • Welcome back to the realm of the living, man. You are very much missed

    @carolynjoycecaperlac4944@carolynjoycecaperlac4944 Жыл бұрын

  • He is back….

    @CreeperKING-he2kk@CreeperKING-he2kk Жыл бұрын

    • Btw ur first and didnt say it well done

      @gdabeast5214@gdabeast5214 Жыл бұрын

  • Bro FINALLY JPerm is back with a very nice Video!!🤩🤩🤩

    @speedcuber3107@speedcuber3107 Жыл бұрын

    • How did you watch the 20min long video in just 1 min ?

      @jonathanleprenom@jonathanleprenom Жыл бұрын

    • @Jonathan Dammann Speedcubing I knew it was going to be good. Of course i didn't watch the video at first.

      @speedcuber3107@speedcuber3107 Жыл бұрын

  • When I saw this video came out while in school it instantly made my day better😀😀😀

    @thefunferret8051@thefunferret8051 Жыл бұрын

  • Glad to see you back! We all love and miss you tremendously!

    @mansfieldguy78@mansfieldguy78 Жыл бұрын

  • personally I think my YS3M ball core out the box is better than my Tornado v3 Flagship and Moyu WRM Maglev 2021 and RS3M super.magnetic 2022. Would be good if Jperm has time later to show us if or how JPerm setup his YS3M.

    @mustseenow991@mustseenow991 Жыл бұрын

    • Lol, you just named (almost) the exact 4 3x3s I own (except I only have the spring version of WRM). But yeah, TV3 is great, and the Super RS3m is decent, too. But the ys3m ball-core was the first I got, has always been my main/fave. All 3 are pretty great, but IMO ys3m is the best (tornado is faster and smoother, but also feels super-delicate, like you could shatter the brittle, plastic core, by dropping it wrong, one time; Corner-cutting is not great, too. But the Ys3m is a workhorse; sturdy, reliable, and works right, every time) I used the damn thing so much, unlubed, when I first got it last year, that I wore off half the "dragonscale" pattern, and have been thinking of getting a new one, now I know how to maintain a puzzle better

      @baconsarny-geddon8298@baconsarny-geddon82984 ай бұрын

  • the king is back!! I swear i’ve rewatched all ur past vids more than 10 times already! missed you man! 😭

    @hwanghyunjin-skzclown0_0@hwanghyunjin-skzclown0_0 Жыл бұрын

  • So good to see you're back!!!!!! Can't wait for the upcoming vids!

    @WillFairfaxSKI@WillFairfaxSKI Жыл бұрын

  • Your fans, your subscribers, cubers have been waiting for you and finally!! Your back!

    @RandomUser787@RandomUser787 Жыл бұрын

  • At least i got to catch up with all the tutorials. So happy your back.

    @Nm321_@Nm321_ Жыл бұрын

  • So glad to have you back with us! We miss you! Hope you had a great break !😀😀

    @Elytsui@Elytsui Жыл бұрын

  • Thank you for coming back! I have lost my motivation ever since you left.

    @CoolBluePlayz@CoolBluePlayz Жыл бұрын

  • It’s so great to have you back!!🎉

    @cobra_bubbles1@cobra_bubbles1 Жыл бұрын

  • Thanks for coming back

    @ProRacersUnited6230@ProRacersUnited6230 Жыл бұрын

  • Welcome back jperm!!!!!!!! Great to see u back.Also with the YS3M I can hear the same genus and see texture I don't know why I don't know how don't ask lol

    @wolfiegreat132@wolfiegreat132 Жыл бұрын

  • HE UPLOADED! YESSSSS. It is great to have Jperm back

    @NoahPlayz421@NoahPlayz421 Жыл бұрын

  • I’ve drifted so far away during your absence and now I have motivation to practice 3blnd and actually finish learning it for my comp next Saturday

    @brushwanderer_1@brushwanderer_1 Жыл бұрын

  • DYLAN IS BACK I swear this man came back at the perfect time Feels great to have you back man, keep up the good work

    @MisterRubiksCube@MisterRubiksCube Жыл бұрын

  • Finally After 4 months NOW JPERM IS BACK! :) im so Happy while Watching this new video. :D

    @xenonxrz7931@xenonxrz7931 Жыл бұрын

  • Hello Mr. JPerm, you inspired me to get into speedcubing and I now have recently bought my first ever speed cube. I will become as good as you one day. Thank you for the inspiration

    @breadpencil4404@breadpencil4404 Жыл бұрын

  • As always Great review and is good to have You back .

    @leszekmazurek8806@leszekmazurek8806 Жыл бұрын

  • Finally J Perm is back! I missed you and your humour a lot.

    @anunphunnyguy7593@anunphunnyguy7593 Жыл бұрын

  • FINALYYY I ALMOST QUIT CUBING NOBODY UPLAODED THERE WERENT ANY COMPS IM SOOO HAPPY UR BACK LETS GOOOOO

    @semmysloth-kh8jr@semmysloth-kh8jr Жыл бұрын

  • Thank you so much for all of your tutorials I got my first 14 second solve. You are awsome. Love lour vids

    @destrylodman349@destrylodman349 Жыл бұрын

  • I instantly pressed the notification that you've posted a new vid hahaha Feels so good that you are back Jperm!!

    @julianjakecalibo3923@julianjakecalibo3923 Жыл бұрын

  • I am so glad you are back

    @keshavraina7093@keshavraina7093 Жыл бұрын

  • JPerm, my man! You’re finally back. I was lazy to cube for a long time 😂. But it’s good to see you back man! Welcome back. It’s okay. I know it’s hard sometimes to make content. Take your time. No need to rush.

    @rip_aura@rip_aura Жыл бұрын

  • welcome back. thank you so much

    @nathanialbowlby554@nathanialbowlby554 Жыл бұрын

  • So glad to see him back

    @Hardballer_player_13@Hardballer_player_13 Жыл бұрын

  • When you stopped posting… I actually cried I don’t know why but I did you are a really a great KZheadr keep it up!!!!

    @Vinnersstudio@Vinnersstudio Жыл бұрын

  • Glad to have you back! We all were eagerly waiting for the next Jperm video!

    @TZ_Cubes@TZ_Cubes Жыл бұрын

  • Hi your vids keep getting better every time and I’m happy you came back

    @Playtobepro@Playtobepro Жыл бұрын

  • Hey Dylan! I am so happy you are ok and back! you are a HUGE inspiration for me (youtube and cubing) and I am so glad your ok! I am looking forward to that WR average Recon by Yiheng ; )

    @CuberCaiden@CuberCaiden Жыл бұрын

  • YAS YOUR BACK YOUR THE ONE THAT MADE ME START CUBING

    @Tea_Man345@Tea_Man345 Жыл бұрын

  • The legend is back!!! I miss u so much jperm

    @cubehong@cubehong Жыл бұрын

  • I've just started watch you last mo th and have been looking at everything for 2+ years ago. Feels weird to see one now 😅 You're awesome 😊

    @BrassBunny@BrassBunny Жыл бұрын

  • Im glad that you're back. Not even 5 sec after i saw this vid and realized its from 7 hours ago i clicked it fast as possible

    @ItzLuzTheOfficial@ItzLuzTheOfficial Жыл бұрын

  • Its like a blessing to get j perm back for speedcubers❤

    @kanavloveschess@kanavloveschess Жыл бұрын
KZhead