MOUNTING A TIRE BY HAND! (TECHNIQUE)
2020 ж. 23 Сәу.
196 727 Рет қаралды
See the technique to easily mount a tire by hand! The process is very fast and easy. REMEMBER: After you get the tire bead sat on the wheel, you must fill the tire up to recommended PSI, and you must get tires professionally balanced!
THUMBS UP, COMMENT, SUBSCRIBE! MORE COMING SOON!
Thumbs up for her letting him do this on the carpet!!!🤣💯💯💯
Lol I thought so too 😂
I kinda wondered about why they used the living room carpet.
Honey its just soapy water!🤣🤣🤣🤣
That sounds like a comment that only someone who's lady wears the pants 👖 in relationship would say
:)))))
This was the most peaceful tire change ever lol you made it look effortless!
"look" i've been here for an hour and 23 minutes
I feel the apart of why this vlog’s author made this job feel so effortless was his un-hesitation in grabbing bead with that flathead screwdriver. Skills I commend the author on that.
I love how when your DIY at home, so you look up how to do it, and in all the videos that make it seem like an easy effortless task and only take about minutes. So your pumped after watching all these ways do it and get started.....3 days later, your frustrated as hell and just cant seem to fogure it out cuz its hard lol
Quick Tip from a 14yrs experience ex-tire tech: for the first bead instead of the flat screwdriver you can use your knees and give it a small jump and It will go in like butter.😉😉😉...Good video Brother Keep it up
They trying to charge me over $60 for two 4-wheeler tires. This is going to save me money now and in the future. Thanks. Feedback: This video is structured really well. You nailed it, don't change a thing. Step-by-step, easy to follow, thorough, you explained why you were doing things the way you did them. 100% 5 out of 5.
A ratchet strap works great for airing up. Place it around the perimeter in the center. It helps seat the bead.
You have an incredibly understanding wife to let you do this on the living room carpet! I learned a lot but I'd have to do it outside. Great video.
Newly weds! That's the 'total forgiveness' zone.
I use a large Rubber mallet when I remount my tires Slide the tire over the rim as far as you physically can go Then use your rubber mallet to persuade the tire to go where it’s told Always works for me. And no damage to the chrome or alloy wheel rims
Going to try this right now on my 18” rim hopefully I don’t have to resort to damaging it
I use to do that with coal truck tires
Also a good way to break the seal
That was great. I have been changing tyres on a proper Machine Tyre Changer all week and your video was well worth a watch. Nice and relaxing too.
Great video, easy and explained well. Saved me money from going to my local tire shop when I was dead broke
Love ❤️ the characters, checking the scent, holding down the pad, then supervising the garage from behind a protective barrier. Mr. To-the-Point was also helpful.
The camera woman made this video great!!! You did a good job but she makes the video. Her comment to start the video, the way she pans through the tire to the pup.....pure greatness!!!!
I give this video a solid 10 across the board! Rarely do you find a video where you follow the exact steps shown in the video and it works perfectly. Usually the video makes it seem a lot easier than what it is. But I will say this video was spot on! I followed the exact same steps as shown and I had no issues it worked perfectly the first time!! So I definitely recommend this video to anyone who wants to mount a tire to their rim and want to do it pretty much effortlessly!!! A1 Video Tutorial!!
In the LIVING ROOM no less. Great vid, thanks.
My wife would never let me change my tires in the living room until she saw this video!
lol....
Awesome! I am inspired! Not only do they charge an arm and a leg to do this at tire stores, I can't get an appointment for 3 days! I had a friend whose dad would spray ether around the inside of the tire and throw a match on it to bead the tire. I think I'll use your technique; I like my head.
Hey Man, Thanks for this video. I like the way you methodically went through the install step by step and at your own pace. You made it seem really easy and didn't struggle much with it. I ordered a spare tire for my Bronco and will give it a try. Thanks!
Good, peaceful video. Made it look easy and wifey did great showcasing your pups!
Thanks for posting this video. 1 16"x 7" chrome alloy wheel/225/60 tire down. 3 more to go. I used foam instead of wood. I also started with the wheel face down on the foam. So I wouldn't deal with the potential cosmetic scratches that could occur while prying the 2nd side of the tire over the wheel. Instead of using a c clamp to keep the tire from "spinning," I used a small rubber mallet, that ended up seating the bottom lower portion of the wheel. So that prevented the tire from "spinning." I didn't think it could be done without damage. But this was easy af. I rather scratch up my wheels and know it as opposed to a professional wheel shop who will try to hide it. I had an installer scratch up my wheels and try to hide it. Never again.
You can't often mount your tires from the "inner side" of the wheel. The way the hub of the wheel is constructed doesn't allow enough room to position the bead far enough inside the wheel. Hope that helps. I found out the hard way... 😂
Wow that was awesome! Probably the best tutorial video on how to do this yourself.
One thing I will say based off the experience of changing my own bike tires is overall your technique is correct take small bites and use your hands to finally push the bead over the rim IF you can. Great job dude although bike tires differ due to them using a tube, the concept is the same! One thing I like was your success with using screwdrivers thats impressive.
Thank you for your clear humble instructions. You are a smooth operator.
Very smooth! thanks for the techniques, much better than brute force!
I see you have a ton of positive response.. Jere is one more. Great job . Keep up the good work . maybe another one for removing tires off rims without special equipment . I've used lumber to drive on to break the beads but there are other ways. I'll follow you on it.
I am immediately sold on this man’s wisdom and knowledge of the topic he is instructing and I will follow his tutorial with with confidence based solely on his ability to rock a mustache.
Thank you so much for this tutorial 🔥🔥
clamp trick really helped me finish the job. thank you
Just used your vid for the first time about to fill her up with air. Thank you so much!
He makes this look easier than it is not that thats a bad thing I found changing bike tires the first time it takes more force(not a lot though) than you think to inch away at that tire bead. Great vlog I enjoyd this a lot.
Great Vid...so laid back. Excellent
Thank you for your advices
POWER couple.!! 💪 Cool Video man... Thanks for sharing.!! 💯
Thanks for blessings of knowledge and example
This guy is quite intelligent. IQ does make a difference.
What I love the most is your furr babies 🥰🥰🥰🥰
Thanks man. Got some used parts to make a full size spare to replacement my donut. Didn't really want to take it to a shop to have it mounted.
I remember doing this back in day I needed a refresher thanks
I love how you converted your living room into a tire shop. I've been procrastinating installing new tires on my Hijet Japanese mini truck until warmer weather in the spring but now I'm rethinking that decision. 😀 3:40 - "We don't care about the underside." Until there's a slow leak where the bead doesn't quite seal. 😲 5:30 - I don't think I'd want my balzack on top of a tire when the bead seats. It can be very violent. I'm a fan of your minimal tool git-R-done attitude but I'm not sure that using screwdrivers slowly will prevent aluminum rims from being slowly scratched.
Came from Saab Tech after watching his same method works great thanks.
Same here!!👍
That's some serious skill to effortlessly mount them on alloy wheels like that! I've done alloy wheels once and left a noticeable mark on one of the rims. After that frustration I swore to only do steel wheels unless I was in a pinch. Very good video man!
Thanks man!!!…. I needed that video!… respect!
Finally , somebody putting a new tire on a rim instead of an old worn out one... big difference!
Great vid! One thing that gets overlooked is that all rims have deeper groove on one side. It really helps to start the tire on the correxct side . so that the opposite edge can go into the deeper part of the rim... not sure if Im explaining it right but it reall h elped me in this regard. cheeers]
Its called the drop center
Great video. Is there an update on your Camaro? How’d it all end up coming together?
Nice video, great narration, great camera, nicely consistent audio levels.
Is it weird that this was surprisingly relaxing to watch?
Yeah, you're a freak.
Bro the time saved alone is worth it!! Takes Firestone 4 hours to change my tire 😫never been back since 2018
Very helpful, thank you! I'll have to make sure my dogs do the sniff test too lol
You make that look easy! Good taste in wheels. And T shirts. I have that same shirt🤙😎
Nice ! I wonder if this will work with a little tirer inflator?
Awesome, although in my case with 40 series tires, not sure if I can lean on them the same way with my knees. All I picture is banging them on the rim trying to apply pressure to the other side. Maybe with some kneepads and tape around the screwdriver for extra scratch protection I'll try
I have seen a lot of these videos and began to think that I totally can do this myself... good thing I also saw your video - I can't do this. I didn't think so far as how to put air in the new tyres 🤔😄
Thanks! This is great. I have all the simple tools to do this including a chihuahua to do the quality inspection.
Very useful thanks
Wow💥 Good job man !!! Everythings' nice and clean, tires, wheels, Rims, and your home also !! -- I love your little dog 🤗
Thank you!
That was amazing 👏
Can you set the tire in place with a regular portable tire inflator?
This man just earned a sub. Excellent job!
Excellent, will this work with LT-rated tires?
Great video, thanks for sharing :-)
Using screwdrivers may damage the tire bead . Ken Tool manufacturers well engineered tire tools . Akron , Ohio Made in America since 1920 . Nice people to deal with ! I am glad you mentioned lubricating the inside of the second area to be installed . Murphy’s Tire Soap works well !
What length for the 2x4 ?
saved to my favorites!!!!
I would not have considered this a living room project. Less likely to scratch the wheel on carpet. Respect
It's something about the beading pop that makes it so satisfying lol
Thank you so much
You can mount but how would you balance it?
Makes me sick seeing how easy that was. I just dropped off my car to get four mounted and balanced and it going to run $260. Never again brother. Thank you for posting this video.
Do I have to have a compressor or can i use a regular air pump?
Would it help to wrap the screwdriver in duct tape or electrical tape?
I think that that was worth a like. Cheers!
Super video. How do “ you “ remove a tire from the rim - any video soon or is there one already? BR Jesper
This was great! Cute dogs as well! 🐶
What do you think is about an estimated time it takes to do all four?
:^0 I'm gonna be in trouble doing this indoors mate... Nice moustache also.
I knew there was a way...... Easy like sunday morning bro.!
Is it much more difficult to change a tire (I mean to replace it completely) at a low temperature? I did my 1st tire, balanced it, and ready for the 2nd one, but the temperature here dropped. I saw in one film how they heated the tire w/heat gun, but how much, where exactly, all that is kind of vauge. Also in that film they were working on tractor tires, I have just regular passenger car (R16 tires). My HF Tire Machine is mounted outside, while it is snowing I won't do anything, but tomorrow it will be clear. So I decided to do a small research on the subject meanwhile. At what temperature you can change tire more or less comfortably, can you do it @45F, or it is too low? My main concern is that I can tear the tire or burn it w/heater gun. Thank you for a great film, but would you do that procedure at a low temperature?
What is the tire is Michelin pilot sport cup2 with no stretch at all. .i try this and its hard as a rock , specially the side wall. Not even me add my weight with my knees will the side pop in
Thanks 👍
Good video
Good vid, well done
This was a great vid to watch. I’m not gonna try it lol but a great vid to watch
great job nice video👍👍
Thanks man
Is this a 15x7 wheel with 275/60/15?
impeccable
GR8 STUFF
good job. easy to understand and who don't like a couple dogs looking for a place to raise that back leg.
Nice tips
Changing tires in the living room - effing awesome!
How do you balance the wheel?
Does the soapy water act as a bead sealer?
Thank you for uploading the video. It will help me out a lot tomorrow! I do need to point out that you're getting water on your carpet. You may want to have your place tested for mold. Mold can have a huge impact on your health
But now I know what happens to the carpet in my rentals
Thanks!!!!!
Can you put the tire onto the back of the wheel first, then you won't have any chance of scratching the front of the wheel?
Dude! Your girl friend is the best!!!
I kno im 2yrs late but “Love the vid man!”
VERY nice video. I ESPECIALLY liked the help from the doggies!! "Go with the Coopers!!" 🙆 PS What size tires are those??
Sorry for the delayed response! 275/60r15 rears & 245/60r15 fronts
Very well made. many thanks