#woodturning

Imagine the aroma of freshly cut sycamore gum filling your workshop, the hum of the lathe as it turns, and the anticipation of making something functional and beautiful. Today, I'll walk you through making a stunning sycamore gum lamp base.
Here are the steps:
1. Select Your Wood:
Start by choosing a suitable wood.
I used sycamore gum in this video.
Hardwoods like oak, maple, or cherry work well.
Make sure the wood is dry and free from defects.
2. Prepare the Blank:
00:00 wood cutting:
You can use the wood of your choice as your blank and cut it.
The size will depend on the desired dimensions of your lamp base.
Mark the center of the blank on both ends.
This will be the axis around which you'll turn the wood.
3. Mount the Blank on the Lathe:
00:26 Mounting the wood on the lathe
Secure the blank between the lathe's headstock (the fixed end) and tailstock (the movable end).
Use a spur center or a faceplate to hold the blank in place.
Make sure it's centered accurately.
4. Safety First:
Always wear safety gear, including eye protection and a face shield.
Keep your tools sharp and your lathe well-maintained.
5. Rough Turning:
00:39 Turn on the lathe
Start the lathe at a slow speed.
00:47 Primary peeling of wood
Use a roughing gouge to remove excess material from the blank. Create a basic cylindrical shape.
Pay attention to grain direction and avoid tear-out.
6. Design and Shape:
01:16 Shaping the bottom part
07:20 Shaping the middle part
13:21 Shaping the upper part
Decide on the design of your lamp base.
You can create a simple cylindrical shape or add details like beads, coves, or flutes.
Use different gouges and chisels to shape the wood.
Be patient and take light cuts.
7. Smooth the Surface:
19:54 Sanding
Switch to a spindle gouge or skew chisel to refine the surface.
Smooth out any tool marks.
Sand the wood progressively using finer grits (from 120 to 400) to achieve a silky finish.
8. Create a Tenon or Mortise:
22:37 Oiling wood
At the bottom end of the base, create a tenon (a protruding cylindrical shape) or a mortise (a recessed area) to fit your lamp hardware.
Measure the dimensions carefully to ensure a snug fit.
9. Remove the Base from the Lathe:
Turn off the lathe and carefully remove the base.
Sand any remaining rough spots by hand.
10. Finish and Seal:
Apply a wood finish of your choice (such as oil, wax, or lacquer) to protect the wood and enhance its natural beauty.
Let it dry thoroughly.
#woodworking #woodturning #woodturnme
🔹🔹🔹🔹🔹🔹🔹
🥇Click to join: / @woodturnme
🔹🔹🔹🔹🔹🔹🔹🔹
📽️ • Woodturning walnut woo...
📽️ • Woodturning - There's ...
📽️ • Amazing Woodturning: I...
🔹🔹🔹🔹🔹🔹🔹🔹
🆓FaceBook: facebook.com/profile.php?...
🔹🔹🔹🔹🔹🔹🔹🔹
🆓Telegram: t.me/woodturnme
🔹🔹🔹🔹🔹🔹🔹🔹
🆓Email: woodturnmebusiness@gmail.com
🔹🔹🔹🔹🔹🔹🔹🔹
Disclaimer: This video is for entertainment purposes only and simulation only.
Please, to do it first of all, try to ask a skilled teacher in person to teach you and do not do any process alone at home...
🔹🔹🔹🔹🔹🔹🔹
© Copyright
All content and videos on this page belong to Wood Turn Me.