In this video we'll talk through my experiences with the Elegoo Neptune 4 Pro and we'll finally fix the problem that has put the printer out of comission for a while.
Elegoo support EMMCnstallation video:
• N4& 4Pro: How to repla...
In this video we'll talk through my experiences with the Elegoo Neptune 4 Pro and we'll finally fix the problem that has put the printer out of comission for a while.
Elegoo support EMMCnstallation video:
• N4& 4Pro: How to repla...
They haven't offered me the new module (yet) but I ordered the EMMC module adapter which I guess needs to be flashed with an Raspberry Pi Image file. Hope that fixes it.
It’s not a RasPI inside it but rather another similar computer. Don’t flash a RasPI image on it, you can get the official Elegoo image from them!
uhm really should give that Y-axis more room to breath.. at least an inch or two you have your harness backing right against the wall... any who thanks for the heads up on the software have the Plus and Max versions of the Neptune 4
I’m was moving the printer in and out of the cabinet several times when filming the videos. It might have been that it was temporarily up against the wall there. Normally there is ample space for every axis to move properly and the cables are not snagging. But thanks for the heads up!
U won't fix it without installing OpenNept4une firmware =] And emmc adapter is needed too, yup.
I do have an emmc usb adapter. Maybe I will get a spare emmc chip and try OpenNept4une on my printer with it!
@@Hyper_D u won't be disappointed with it for sure. I have no z-offset issues for now at my n4pro and made a perfect first layer already. The twisted axis macros helped with it in my case, theŗe's a mentioning of it in the manual of that custom firmware.
Promo-SM 😑