Scrap Mechanic Tutorial !!! How to Build the best offroad Suspension!
2024 ж. 14 Мам.
87 664 Рет қаралды
Hey Scrappers,
In this video i will show you the best and cheapest suspension you can build in Scrapmechanic Survival, In my exp. See the TIMECODES below.
Timecodes:
0:00 - Intro
0:59 - Suspension Showcase
1:43 - How to build Tutorial
3:15 - Buggy offroading
4:21 - Outro
I hope you enjoyed this video thanks for watching,
Your Band3r x.
The Buggy in the workshop: steamcommunity.com/sharedfiles/filedetails/?id=2613741837
Subscriber for you. Most scrap mechanic designs are impossible to follow and yet the 20 second tutorial at the beginning made this entire contraption make sense. Lovely stuff.
@@trevormoney1517 Thanks man, and welcome to the Band3r Legion :D happy newyear aswel btw
This suspension worked great for me. My vehicle doesn't get much traction so it drifts a lot but its really smooth and never flips.
The real thing has bearings on the 2 top coilovers, 2 bars connected to the live axle with bearings on both ends along with a bearing to allow those bars to twist, and a bar in the middle to create a triangular structure so the axle doesn't flop around. Yours is a cheaper option but could be troublesome for heavier vehicles ie. A vehicle with a bunch of craft bots + storage etc.
I dont follow exactly. Could you explain or point to workshop?
thank you, i was looking for a suspension build that was less complicated than wishbone but a little bit better than just suspension alone. this is perfect! 👍
Glad this helped
have been watching suspsion videos for 2 days and finaly came acrross this so much cheaper and easier to make in survial and easy adapted to make more or less ground clearnce thanks mate good vid
I'm glad my video helped you out. and thank you for the kind words man ;) hope you'll enjoy my old and upcoming content to ;)
cheers man keep it coming wish i could show you how i adapted it in my world for a lowere center of gravity
@@shortysrandomvids8752 join the discord you can show it there with screenshot maby ?
i cant believe more people aren't subscribed and liking these videos. You made my scrap mechanic experience much better!
thank you very much for this nice comment, but the sad story is most of my vids don't get through the youtube algorithme. this one did as you can see :D but again thank you
@@band3rTripleIQ you're welcome :)
That’s called “dependant suspension” independent suspension is what you would call a wishbone suspension. Where each wheel is separated individually. However good video 👌🏽
it has been mentioned a couple of times already, i was wrong about the name :D But indeed Jako you are 100% correct. Thank you i'm happy you enjoyed the video.
Oh my gosh thank u so much I used a modified design of this on my prerunner truck for the rear suspension
I´m so happy i could help you and so many others with this vid. Thank you for the comment
Interesting, I tried a suspension setup like this back when creative was just released, but when articulating it tried to bend the suspension pieces and that caused the suspension glitch. So it felt kind of awful and I never tried it again. But it seems like bearings have a lot more stretch now, so I guess this is finally a viable setup and I'll defo try it again.
Hope it works out for you, let me know ofc
at the first i didn't like how simple it looked but after 2 months after i saw this video i did some research and realized solid axle is actually better than double wishbone in offroad
overall yes, just not when you go to fast it gets prity bouncy :D
Muito bom e fácil de entender, obrigado!
De nada ;) fico feliz em poder te ajudar. google tradutor tbm
Thanks is very perfect!!!
Glad it helps you
Thanks very much i will use this suspension in my first survival buggy-truck
you are wlcome, glad you like it
Really nice i hope i also can build it when i buy the game!
You sure can i hope it serves you well ;)
A real benefit of this is survival if you can add as many suspensions as you want, instead of upgrading them, saving component kits. You can also use bearings on the connections between the body and the bearings to lower the vehicle by extending the wheels forwards and backwards.
I like this better than a wishbone on the rear suspension, seems to keep the vehicle from tipping as much when I'm driving like an idiot (usually)
I have my fair share of driving like an idiot myself, suspension does help a bit on that front. Thanks for checking out my vid 😉
great vid mate :)
Thank you verry much
Nice and simple
Its verry easy to make and cheap, hope you can use it one day.
Thanks
thank you!!
You are welcome
Stayed until 0:31 and I wasn't disappointed.
Then i did a good job, better then the 30 second mark :D
Can you do a tutorial on your stering system please :) Love the tutorial too
I was planning on making one yes ;) so keep an eye on the channel for that one
@@band3rTripleIQ Ok thanks ! Because me car was just fliping everytime
@@n1n0_05 i´ll see if i can get it done next week ;)
@@band3rTripleIQ Ok thank you very much ! :)
the red builder loves you :)
ofc he does
@@band3rTripleIQ i am fagian0 friend of red builder can you add me in your steam friends please? ;))
@@CultureTriviaYT untrue
that's someone I know trolling
@@Fagiano shut up you seem like ben yedder and even frigorifero, scaldino, microonde, tavolo, bottiglia d'acqua, 🤽🤽, gelato, occhiali, tovagliolo, messi
I gonna be the one to say the suspension system you built is not in fact a independent one but a solid axle suspension system with all the extra links.
i know if you scroll down the comment section this has been said befor. But thank you for clarifying this again ;)
You deserve more subs my man
Eej thanks for that comment, got alot of subs lately maby more will come in a mand can only dream. But thank you verry much means alot to me
@@band3rTripleIQ nah man, its you that helped me so the one who says thanks is me
@@davyzeradaspalmera Then i did my job right, Enjoy the suspension
Good
Welcome to Scrap Mechanics Bro!
Thx. You can make tutorial how to make nice buggy car
A buggy can be all sort of shapes and sizes gonna be hard to make a Tutorial on that on. But i'll see if i can do something (nopromises), I do hope you enjoy the tutorials that i put out helped you one way or the other.
How is it when you collide with bots or cows? does the vehicle spaz out at all? I was having issues with double wishbone. I like your design its is much simpler.
I Never had that issue, with this or de double wishbone.
the bearings that allow it to flex should be on the top instead of the bottom because it can cause suspension glitch
*me who has built the exact same suspension before watching this video* hmmm... this looks familiar
Same, this is my go to for both of my survival vehicles. I did package some stuff differently so that it didn't interfere with the body, but the mechanics are exactly the same.
What do you connect the bearings too engine or the steering seat and what bearing
2:41 You connect for stearing to you Seat/saddle 2:46 You connect to your engine for Power to your wheels Hope this helped you ;)
@@band3rTripleIQ oh thank you so much :) (edit I was still there till the end :))
and if you want more flex just put the springs closer together
True
but how do i make the conection?
I don't understand what to connect where with the connect tool
Will you make a guide for the first buggy that was in the movie? 1:16
Ooof, the thing is this is a old video of mine and the buggy is purely looks the suspension should work simular on all vehicles if you get the right center of gravity ofc. Just be creative because i don't know if i can replicate that same exact Buggy. So sorry Hope you understand ofc
Wait, but how do we set up the Steering???
what editing software do you use?
Davinci Resolve
idea to upgrade a spider leg suspansion rover ?
not sure what you mean, do you want to build a suspension system that looks lik spider legs ?
@@band3rTripleIQ not directly the suspansion but car has like 6 leg made of props and tilted with controler to make it stable ( and the suspansion is at the tip of the leg )
Can you do a Tutorial how you do the Buggy plss i need it for survival =))
i will see what i can do would the buggy in the steamworkshop be good to ?
@@band3rTripleIQ yes make a buggy please
@@band3rTripleIQ and an auto fueling car auto fuel my engine with gas thanks😀😀😀
sir that is a solid axle
i have been corrected many times and again i stand corrected, But yes i was wrong again i'm not english speaker. thank you for the correction in one of my other videos i rectify my mistake. But hopefuly the video in itself helped alot of people.
@@band3rTripleIQ very nice video will definitely use it
Nice idea but wish it explained where to put the steering as it confuses me.
2:41 There you have the bearing you connect with your connect tool to your saddle or seat for streaing. Hopefully this helps
i made this a year back on my old truck
Aren't you that wreckfoxy_yt kid on Reddit that thinks he does everything first and claims his piston buses are the best creations ever made? Lmao
@@NSarg04 im not a kid and you're very toxic
@@Wreckedftfoxy You are, but okay lol and nah I'm not toxic I'm just annoyed at you thinking everything you do is the first and how you always put other people down because they "stole your idea" of something you never posted and because they can't provide proof that they did it before your non-existent proof
idk why I always get a suspension glitch
you would do a tutorial to build this buggy
The thing is i made this buggy a long time ago when i was bored on creative, i used it for my suspension vid because it only seemed fitting. It will be hard making the exact same one again :D i just use this suspension and then i let my creativity make the rest of the buggy. you can always download the Blueprint a link should be provided in the discription and or comments ;)
@@band3rTripleIQ Okay
Idk the connections
just normal steering connection and leave the bearing under the suspension that is connected to the horizantal bar free (so no connection there)
That's coil spring solid axle. Not independent suspension.
Ejoo thanks for clearing the air on that one. Not sure what it was called in english. ;)
@@band3rTripleIQ download the automation game.
YO
how can you see the logistics i wana know
What do you mean with logistics ?
@@band3rTripleIQ analystic i mean,how to see how many subs you have how much watch time and etc
You can find all Analystic in KZheadSTUDIO, if you posted a video after a few days you can see all the information about it.
I tried to copy this but it doesn’t work the tires act funny and I can’t move forward
did you connect the steering right? and gas engine to the beering closest to the wheel ? like for 99% of the people this works fine. also check if your Physics in settings is set correct.
@@band3rTripleIQ ok thanks I’ll try
@@band3rTripleIQok I tried but I can’t rotate when driving if I want to go somewhere I have to drive straight or side ways no rotation
no fucking way i just now realised taht lemonchi is me on my old acc
that is not independent suspension, its a solid axle
Yes i have been told many times 😆
Very usful
Thank you, hope you can use it in one of your builds ;)
when a video has more likes than subscribers
Silly right ? :D come on peeps Sub to yours truly hihi, Thanks for the Comment ;)
@@band3rTripleIQ I subbed and liked :3
@@-aid4084 thank you verry much, means alot to me. And i hope i´ll see you in my streams aswel ;)
its not working for me
What about it doesn´t work maby join out discord and show us the problem so we can help you out
Double wishbone is way better
i don't think you understand what independent is
If you read through the comment section this topic has been discussed in lenght, i have stated that i was wrong in the naming. Its a solid axle suspension so i have been told. I´m not a enlgish speaker so mr andrew i will tell you aswel i was wrong and sorry for the mis information there. Hopefuly the video was otherwise satisfactory.
Hi
Hey Lavu
thats not a indenpendent suspensio at all..
Yes i have been corrected by allot of people already, solid axle right? My bad hope you enjoyed the video eitherway
Hey Band3r, no offense or anything but, people aren't watching through your videos due to your heavy accent and, slightly, broken English. Just keep making videos. Every aspect of your video creation, including your English, can only improve over time. I'm brand new to Scrap Mechanic and your video was quite helpful, so don't let your ratings affect your work. If you work, every day, with the intention of doing a better job than you did the day before, success WILL come.
Nobody cares about his accent
@@thefoundinghollow520 For someone as wrong as you are, you seem so sure.
I think he was talking about how it can be a bit difficult to understand @@thefoundinghollow520