2008 Lexus GX470, review and thoughts after 2.5 years of ownership

2022 ж. 11 Қаз.
6 325 Рет қаралды

Some of the still pictures, and the stream clip right at the biggening are up in the Rockies just outside Georgetown, CO.
I'm sad to send it down the road, but I've got to many vehicles around and something has to go. :(
1:15 why I picked out this one
2:25 exterior walk around
3:10 looking inside
4:20 taking it for a drive

Пікірлер
  • Great last date. As they say, goes something like this.....takes to lose something to appreciate something.... Don't cry.. 😢

    @Kdawg101@Kdawg10122 күн бұрын
    • :) I have fond memories of it, but I haven't actually missed having it around. It was replaced and just not needed anymore. I'd buy one again in a heartbeat if I needed another one.

      @bennieaust@bennieaust21 күн бұрын
    • @bennieaust you could have kept it around.....$15K doesn't make too much difference in the big picture. Now, someone else is driving your X ... After all, she was fateful to you...

      @Kdawg101@Kdawg10121 күн бұрын
    • @@Kdawg101 I don't have enough space for everything. Can't keep it all.

      @bennieaust@bennieaust21 күн бұрын
  • how many miles and what did you sell for?

    @aarongerman7857@aarongerman7857 Жыл бұрын
    • 179k miles. Sold for $11,000.

      @bennieaust@bennieaust Жыл бұрын
    • Good price that’s the price range I’m shopping for 😂 maybe 1k more now

      @ozzy_fromhell@ozzy_fromhell Жыл бұрын
  • How to spot the point of failure in manifold?

    @LLCoolPass@LLCoolPass Жыл бұрын
    • My right side manifold failed at the front edge of the front port. I don’t know if they all fail right there or not, but stick you head in there with it running and the noise will tell you. Also it will be black with carbon around the leak.

      @bennieaust@bennieaust Жыл бұрын
    • @@bennieaust I see look for carbon try to hear it but even if I can't pinpoint hear it I'll see carbon

      @LLCoolPass@LLCoolPass Жыл бұрын
    • @@LLCoolPass yes, also there is a heat shield you will probably have to remove to see the whole manifold. It's tight but you can get access through the wheel well. I did the repair on mine with only removing the wheel, wheel liner flaps and the heat shield.

      @bennieaust@bennieaust Жыл бұрын
    • @@bennieaust brilliant

      @LLCoolPass@LLCoolPass Жыл бұрын
    • @@bennieaust minimum welder machine /type needed?

      @LLCoolPass@LLCoolPass Жыл бұрын
  • If you want a really quiet SUV get a soft top Jeep with an aftermarket top. You're welcome.

    @elgato7824@elgato7824 Жыл бұрын
    • Thanks for the tip! :)

      @bennieaust@bennieaust Жыл бұрын
    • And when the Jeep breaks down, it'll really be quiet 😂

      @Mark-jc1qj@Mark-jc1qj Жыл бұрын
    • @@Mark-jc1qj it was a joke man, jeeps get A LOT of wind noise especially soft top ones. On a side note though I always read how the GX is bulletproof and Lexus reliability but yet there are always people breaking down or breaking stuff on a regular basis.

      @elgato7824@elgato7824 Жыл бұрын
  • They have Lexus in Minnesota???? I was in Twin Cities last month and could hardly see any Lexus or BMW or Mercedes on the road.... mainly the typical American cars on the road.... unlike here in CALIFORNIA, where you sed Lexus every where.....there are as many Lexus on the road as there are Starbucks and McDonald's.... in Los Angeles, there are more Lexus on the road than one can count....

    @Aikynbreusov@Aikynbreusov10 ай бұрын
    • Just mine :)

      @bennieaust@bennieaust10 ай бұрын
  • Your audio recording suffers from too much wind noise, as I am sure your aware, makes. This video not worth watching,

    @robertherrmann4823@robertherrmann48238 ай бұрын
    • Thanks for your feedback.

      @bennieaust@bennieaust8 ай бұрын
KZhead