Starting The BIGGEST DIESEL ENGINE On Earth | 22.000 hp B&W 2000 COLD START
Start up of the 8-cylinder double-acting, two-stroke diesel engine B&W 2000 at Diesel House in Denmark (opposed-piston engine). Since 1933 it was the world's largest diesel engine for more than 30 years. The engine is started every 1st and 3rd Sunday of each month: dieselhouse.dk/en/engines/bw-...
▬ About this Channel ▬▬▬▬▬▬▬▬▬▬▬▬
HD1080ide wants to entertain you with amazing technology-related documentary videos in the highest possible quality. We show you stunning ship launches, amazing machines, historical trains, unique airplanes, agricultural technology or unexpected places you didn't know existed. In short, everything that has to do with technology and everything else that is interesting.
▬ Suggested Videos ▬▬▬▬▬▬▬▬▬▬▬▬
👉 Start Up of a WW2 Submarine Diesel Engine: • Start Up of a WW2 Subm...
👉 Leopard 2 Engine Start: • Leopard 2 Engine Start...
▬ My Equipment ▬▬▬▬▬▬▬▬▬▬▬▬▬▬
Camera: Sony A7 III
Lens: Sony FE 24-240 mm
Microphone: Rode VideoMicro
▬ More Videos ▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬
►Subscribe to my Channel: kzhead.info...
▬ Social Media ▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬
►Facebook: / hd1080ide
►Twitter: twitter.com/HD1080ide
Any reproduction or republication of all or part of this video is expressly prohibited, unless HD1080ide has explicitly granted its prior written consent.
I need to fit this into my Miata.
Some dude on youtube probably have made a how-to😂
Hold on there...I need it for my skateboard😁
A diesel Miata? I was thinking of just putting a windup motor in mine.
It will fit.......put one in mine ....only problem it's a bit slow on take off 😕 🙃
It would flatten your Miata. I bet it weighs a few tons.
One of those things that can turn most fellas into an awestruck 10 yr old again...Watching a really, really big piece of machinery rumbling and hissing itself into life. Great stuff!
Absolutely!
Can i get one in a 2024 new skidoo?
@@jlo13800 , how about a Skido that sounds like that? 😁
This engine is now offered on the 2024 arcticat catylyst sorry!
I’m one of those little kids
One of the best videos on this subject I have seen. Not only do we get to see the engine start and slowly come to a halt after shutdown, but there is even a functional model with one cylinder cut away to reveal the opposing piston design. The video also includes shots of the enormous valves as well a valve along with its valve pocket. Shots of the starting compressor are shown too. To top it all off, the video quality is very good, and the video is not overly long (time wise). Bravo.
Agreed. Until I saw the "cut-away" at the end, I misunderstood "opposed piston". What a beautiful piece of machinery. I hoped the operator, with the microphone would narrate some information about the technical specs. as the end. .
Very impressive engine. The start-up didn’t seem too complex-he opened a valve and flipped a switch. Starting my truck in the winter is more difficult.
Be happy because your truck doesn’t consume even half of what that monster does 😮
Be sad because your truck doesn't haul even half of what this monster does 😮
What you did NOT see was the approx 15~30 minutes of running around prelubing everything and turning the engine over, the checks and tests, BEFORE he opened that valve and flipped that switch....
Because it's a fraud. The engine is powered by compressed air, as in most engine shows.
@@nazgulX Having been there, and being a marine engineer, I can assure you that that engine does NOT run on compressed air...
Bet this engine outlives all the EV's in current use.
Humanity won't outlive them at the current rate of change.
I bet the pyramids outlive all the houses in current use. I still prefer a modern house to pyramids or their predecessors: caves
@@harmongladding8202 Sounds like the "global boiling" hoax. Memo; temperatures are 5oC lower than when the Romans were around.
Pyramids were never meant to live in and there are luxury caves today that are very nice.
I’m watching this in my car with some decent speakers, while idling. The sounds, with the gentle vibrations……..I’m in heaven…….
I was sailing on MS " Georg Büchner" ex " Charlesville" 50 years ago driven by such an engine, built in 1950. I started my sailors life there and decided for an engeneers career on the spot, when I saw this fascinating engine. But I must admit, that it were tough times sailing in tropical waters with 45°C ER temp and exhaustgas enriched air leaking from the lower exhaust piston stuffing boxes you can see oscillating in the video 😂
Some think they are a MAN when they have worked on a engine, you are NOT ! You are a MAN when you have worked inside a engine. Also any proper MAN engine, well they top out around 90 RPM Yeah a engine room get mighty hot on Equator, teach a man hoe to sweat like a real MAN. And not German MAN that later bought B&W to be able to make proper engines.
PS: unfortunately this precious piece of engineering was lost for ever, when the vessel was towed to the scrap yard and sank underway in the eastern Baltic in May 2013 😥
The milage is going to remain terrible until they put wheels on it.
I attended a demonstration a while ago. Really impressive. This device was used generating current for Copenhagen in former times they said.
Thank you I was wondering what they had built this beautiful machine for
@@alliwishis_2 And today, when powered up it can deliever elctricity to all of city of Copenhagen... is almost a small wonder.,
I signed on the O/O tanker M/S Svealand in 1975. It had a B&W ten cylinder with 40700 BHP.
All main engines are started the same way; by compressed air being injected through an air start valve on the cylinder heads, which kick the engine over then fuel rack is opened allowing fuel to be injected into the engine.
The Wärtsilä-Sulzer RTA96-C turbocharged two-stroke diesel engine is the world's largest and most powerful production internal combustion engine. It has a maximum output of 84.42 MW (113,000 hp) of power and a displacement of 1,820 litres (110,195 cubic inches), making it larger than a V12 engine.
Always a Wärsilä idiot mentioning that.. read the title carefully.
Work of art.
... how many zylinders? Made in Finland?
@@_Alfa.Bravo_ The Wärtsilä RT-flex96C is a two-stroke turbocharged low-speed diesel engine designed by the Finnish manufacturer Wärtsilä. It is designed for large container ships that run on heavy fuel oil. Its largest 14-cylinder version is 13.5 meters high, 26.59 meters long, weighs over 2,300 tonnes, and produces 80.08 megawatts. The engine is the largest reciprocating engine in the world. en.wikipedia.org/wiki/W%C3%A4rtsil%C3%A4-Sulzer_RTA96-C
@@_Alfa.Bravo_ 14 and yes.
Wow. I was expecting a gorilla to start hurling wooden barrels down those ladders. What a massive system.
"Diesel Kong!"
This looks like a real life scene out of the old movie Metropolis. What an astonishingly large engine.
love that movie.
@@RandoWisLuL Absolute masterpiece.
@@Justin.Franks couldn't agree more.
It’s like starting up a whole building. Crazy But that one little wheel seems to be the key to starting this thing up. 😂
enough power to run an nvidia gpu
I've never had the pleasure of working on opposed piston B&W engines, only the Uniflow type with exhaust valves (and valve springs which often broke!). Nice to see this machine is still in working order.
This isn't just an opposed piston engine, its also double acting. It has 3 pistons in each cylinder, 3 different bores and 2 lengths of stroke for the 3 pistons. The one I sailed on in 1975 had the unfortunate habbit of having a scavange fire at regular intervals.
@@billdoodson4232Ah, happy memories of scavenge fires! It was like that on my first trip. The tanker had a 10 cylinder Kincaid-B&W main engine. I was glad when I left that ship.
@@MervynPartin I never really liked any B&W's, I did my first voyage on the double acting engine, hated it at the time, but now see it as an experience I can go on about. Did a couple of of opposed piston engines both B&W and Doxford and I think 2 uniflow B&W's which if anything were worse than the double acting. Loved the RD and RND Sulzers though. Best engines ever.
@@billdoodson4232 I know what you mean about the Sulzers. I had 2 trips on a LPG carrier with a Swiss-built Sulzer that ran lovely. Unfortunately, it had Stork Werkspoor diesel generators which kept bending crankshafts.
@@MervynPartin I had a similar issue with generator engines fitted to one class of ship as "in port" gennys. They used to throw rods or seize at the drop of a hat. They were Paxmans, more commonly known as Poxmans. One would break a rod which would go through the crankcase, shoot across the engine bay and then put a hole in the other engine which would then fail even more spectacularly as it tried to take an instantaneous doubling in load. The Sulzer ME sort of made up for it, but the normal sea going gennys were Allens, which were nothing special. I spent the last 5 years at sea foreign flag with Sanko, all Sulzer ME's and the very best gennys I ever had the pleasure of sailing with, Yanmar.
That is some engineering! So impressive, so smooth..!
Why does Denmark always get all the fun??!
B&W. My dad was ChEng in the 30's to 60's. Mostly Sulzer, Stork and MAN. When he ran the I&J workshops in Mossel Bay there were 12 Danish built wooden trawlers and they all had B&W DL diesels. Jurgen Nielsen of B&W South Africa regularly visited from Cape Town, bringing spares and a bottle of Chivas!! Dad said they were great engines to work with.
I never sailed on a ship with a B&W main engine but several with B&W generators. This looks very like the old C.C.Pounder designed H&W opposed piston engines of the '50s and '60s. Many British shipping companies had ships with these main engines and I sailed on several vessels with either twin 6-cyl or single 8-cylinder installations. Not particularly powerful but could still propel a 1950s built fridge boat to +21 knots when asked.
Imagine what Allen Millyard could do with this engine?
I note with great satisfaction how he opened up the 'hot' valve at the beginning fully; then cracked it back a bit so it wouldn't get stuck as the valve heated up. A true engineer worth his overalls. Salut.
Whilst I agree with your view on not back seating a valve, that is the air start inlet valve so it doesn’t get hot.
I noticed how he handled the opening of “something” and seemed to fiddle with it for a quick second Even an engine of this size has a sweet spot for start up😊 Specifically speaking I have NO idea what he was doing but I could tell that he knew EXACTLY what he was doing What an AWESOME and AMAZING piece of engineering
I would love to see this bad boy running full out! Great video, thank you.
😃Beautiful, unparalleled, but the most powerful engine in the world is the Wärtsilä-Sulzer RT-flex96C 14-cylinder 107,390 hp!
That was an amazing engine. Although replacing the inside fuel pumps on the V-block was a bitch when working in 40deg C temperatures.
Imagine this beast became a runaway - run!
I’d say if that were to runaway it’d be pretty wild.
Coming from the county of Lincolnshire, England where they manufactured diesel engines, watching this type of stuff really is interesting. Ruston & Hornsby were pretty well known world wide back in the early 1900's.
After it started i was expecting the building to rise up and start walking through the town. :D
Hard to believe the behemoth is actually a national treasure. Always wondered how many cubic feet of air it takes to start it.
The starting air was kept on until the engine had completed one full revolution, the lever is then pushed further up to cut off the starting air and start the fuel injection. On our ships, Blue funnel, if it didn't start first time it cost you around of beers for all the engineers, These engines had to be warmed up to operating temperature with steam from the donkey boiler for some 6 hours before starting, otherwise you get cracked liners and pistons.
Years back the techpub firm I worked for did updates for some Ferry-Morse diesels for an electronic manual. The engine block didn’t seem all that spectacular until the writer on the project informed me the engine block I was re-creating as electronic art was the size of a city bus - and that it wasn’t their biggest engine. That was impressive.
engine runaway on this thing would turn Denmark into Atlantis
I'd like to see a dozer big enough to use this.
What a beast. That idle is such sweet music.
Nice to see an opposed piston engine still running. I sailed with a Doxford 76J6 on a ship built in Sunderland in 1967. All of these engines stopped being made in favour of the single acting B&W or Sulzer designs. Fewer moving parts for a start.
Kudos, to the person who got up one morning and decided I'm gonna build a huge diesel engine. 👍👀🤗🙊😇
Please note that there are engines presently with more than a 100,000 BHP fitted on vessels. 22000 BHP engines were in operation for than 50 years
However, large is a relative term, and does not imply BHP.
@@SunriseLAWyes for the run,but for starting is diesel oil. After that is blend oil, mixing of diesel and bunker sea, and finally avec 2 hrs at full rpm around 102...there is full bunker sea .
@@SunriseLAW LNG tankers will also fuel their large diesels with the LNG that is their cargo. Some of those large engines can burn about anything from heavy crude to light sweet crude. (as Caro.lanver said they start on diesel and then switch to product) They will require specialized equipment to burn the product they are carrying. And many very large container ships (not all) are using two engines under 50,000 HP each. But some are using a single Wartsila Sulzer engine, and HP for those engines varies as the engine can be ordered with anywhere from 5 to 14 cylinders. The 14 cylinder can produce around 109,000 HP. (depending on what they are burning and other factors)
When I was serving active duty U.S. Coast Guard onboard Cutter Hamilton (WHEC-715), she had two Fairbanks-Morse inline 12 cylinder two cycle oppose piston diesel main propulsion engines. We would joke that the emblem of “O-P” meant oil pump because the lower air box covers would constantly leak lube oil. These engines had two huge turbochargers at the front feeding into a huge scavenger charger pushing the compressed air into the air boxes. At first, on the Atlantic side we were using marine grade heavy diesel fuel oil to lube the pop injectors, but after crossing the Panama Canal to change of duty stations from Boston MA to San Pedro CA, the liberal west coast climate change cultists forced us to use a thinner JP4/JP5 aviation fuel, we were forced to modify the injectors. The injectors were center mounted in each cylinder.
@@JaguarXJRman Must be terrible for Californians not to choke to death on smog, eh?
A true thing of beauty!
Oil changes on that must be epic.
SUCH a marvel of engineering at the time and even now. The massive effort to machine and install this had to be an amazing accomplishment and even a pride of skill-manship. What an honor.
Good hobby for a cold winter's night.
Ich bin immer wieder fasziniert von der Ingenieurskunst die solche Motoren ermöglichen.
Ich auch
That's an insane piece of kit, absolutely fantastic, thank you ❤️😁👍
You imagine this diesel engine “running away” yikes 😅 very cool stuff, thanks for sharing.
You'd just have to evacuate the neighboring counties, I'd imagine 😳
It can't run away, its a two stroke
In order to start the biggest engine in the world, you have to be the MAN
An old Asea generator before it merged with Brown Boveri and became ABB. Great to see it maintained and operated as a museum.
Insane engineering! Getting the tolerances right when you're dealing with something so big!
🧠✋🏻
Hate to ruin the party but this is only about 1/5 the power of the world's largest diesel 🤣
@@MadScientist267 Where is that engine used?
@@gsp911 It is in use in at least one very large shipping vessel... Wärtsilä-Sulzer RTA96-C It's an inline 14, and clocks in just shy of 110k HP. 25,592 litres (1,556,002 ci) 7,603,850 Nm (5,608,310 lbf⋅ft) @ 102 rpm (redline) Just a couple of key specs. The thing is absolutely massive.
It is oposed piston two stroke of very interesting design. Oh, i would love more technical data apart from being very long lived. Fuel consumption per kWh for example.
B & W old school cool right there.
The guys like" yes yes come alive my darling yes yes"😂
It is not the biggest, and hasn't been for many years. But still a great engine, and fantastic that is still in good working condition.
It doesn't claim it is still the biggest engine. At 13.5 meters tall, 26.59 meters long and weighing in at over 2300tons, the Finnish-made Wärtsilä-Sulzer RTA96-C is the largest internal-combustion engine ever produced and pumps out a whopping 80.1MW (107,390hp) to power a container ship
@@tonymercer7759no it’s not the biggest
The description says "since 1933" , and then says "over 30 years..." So, could it have been the largest between 1933 and ~1963?
this thing is opposed piston engine. so no head as there are 2 pistons in each bore and combustion takes place between the 2 pistons as they come together.
Thank you for explaining that. I’m a mechanical dolt.
Double acting opposed piston.
Awesome indeed. Amazing engineering from the thirties. It’s well maintained as I see. Thanks for showing us this beauty.
The most powerful diesel engine is the Wartsila RTA96C-14 and produces109,000 HP.
This is such an interesting museum. Free entrance. And the retired engineers love to talk about the engines and answer all technical questions. There is more to see than this engine. Enjoy
So annoyed we didn’t get to see those valves jumping all over the place (from a top angle) 🤬
They ain’t valves mate…….the top opposed piston….it’s a 2 cycle engine……
Now that is a big one .
Um motor dois tempos de pistões opostos, fantástico!
And that startup was probably worth my yearly salary in diesel fuel costs 😮
On full load it would consume 1.2 tons per hour!
Holy crap dude! That was immense!😮 -What an absolute #Beast of a museum piece!🤩 Thank you for sharing.🙏👍
What a masterpiece of 2 stroke engineering there!
I had I was a fourth engineer officer standing by one these old timers. I got the chance to drive her during engine trials . Three piston in each cylinder eight cylinders 64 fuel valves . They were prone to scavenge fires . They were also extremely heavy to manoeuvre as it was all manual bell cranks . However feel very privileged to have driven one of these double actors.
I should go there - all those fantastic noises!
Wow,nice,big engine!😊
Old Danish power machine ✊😎
I could smell the grease and metal. Great video!
WOW. Music to my ears.
the best sound on earth!
So, there it is. Right there.
I love it when a big engine has its own patio and walkways!! Also ladders!
Show us the diesel tanks!!
It runs clean for it size & age.
That was one little experiment to obtain infinite energy from a diesel engine
Cool. Thanks for sharing.
I would love to hear it making full power. Big steam turbines do nog vibrate. But you can physically feel the difference between the set just turning and it making full power.
They are very very quiet flat out. You can hear the burn in each cylinder as they are running. Although the one I sailed with could make some noises it wasn't supposed to.
Yeah, I'll be sure to make that a priority during my vacation in Denmark.
They have used and likely do still use the engine and generator to set the cylces per minute so the other gen stations can follow along. Love this engine, wish i can see it someday.
Not anymore. It has been totally cut off from the grid (they don’t run the exciters anymore when they run the engine). But it was until quite recently kept as a backup in case something like a black start of the grid would be necessary and occasionally as a buffer at peak utilisation. It was run for real in the 1990s, maybe even a few years into the 2000s. I don’t remember exactly when it was permanently mothballed. But it is great that the enthusiasts managed to keep it in running condition and created the wonderful little engineering museum around it. Last time I was there for a start the museum had free admission, so if you are in Copenhagen on an open day and you have just the mildest interest in engineering history it is a no-brainer to go visit them.
Very interesting! Thank you!
I wonder if a couple of guys were sitting around having a few beers and they said lets design a really big motor and make it run also!!
That's impressive
Leider funktioniert der in der Videobeschreibung genannte Link nicht. Wäre interessant gewesen zu erfahren, wofür man diesen Motor ursprünglich verwendet hat
Bitte: Der B&W 2000 ist ein 8-Zylinder, doppeltwirkender, längsgespülter Zweitaktmotor, mit einer Bohrung von 840 mm und einem Hub von 1500 mm. Der Generator wurde von der schwedischen ASEA (heute ABB) gebaut. Die Inbetriebnahme erfolgte im Jahr 1933. Die Maschine ist 24,6 Meter lang, 12,5 Meter hoch und wiegt 1400 Tonnen. Das mechanische Wunderwerk wurde von B&W gebaut, um Strom auf dem H.C. zu erzeugen. Ørsted funktioniert. Ihr Zweck bestand darin, Kopenhagen bei Spitzenlasten im Stromnetz zweimal täglich mit Strom zu versorgen. Durch ihren schnellen Anlauf ist sie besser geeignet, Verbrauchsschwankungen auszugleichen als die großen Dampfturbinen, die den Rest der Anlage antreiben. Die visionäre Größe des Dieselmotors bedeutete auch, dass die vielen Arbeiter das Gebäude um ihn herum gießen und errichten mussten. Der B&W 2000 wurde Ende der 60er Jahre aus dem täglichen Gebrauch genommen, aber seitdem wurde er von Ingenieuren und Maschinisten sorgfältig gepflegt, poliert und gewartet. Im Zweiten Weltkrieg spielte die Maschine eine wichtige Rolle im Freiheitskampf, da die werkseigene Widerstandsgruppe sie als Waffenversteck nutzte. Der Motor war mehr als 30 Jahre lang der größte Dieselmotor der Welt. Seit 1970 und bis 2004 fungierte der Motor als Notsystem bei Stromausfall. Der letzte Einsatz erfolgte während des großen Stromausfalls im Öresundgebiet im Jahr 2003. Der Dieselmotor ist noch betriebsbereit, aber nicht mehr an das Stromnetz angeschlossen. dieselhouse.dk/en/videnom/#:~:text=%C2%A0274%20mm-,B%26W2000,-Ogs%C3%A5%20kendt%20som Sie dürfen Google Translate selbst benutzen, um den Rest zu übersetzen. :)
Now imagine his well earned paycheck lol. One dude to start this monster?? Yup he's well paid
Monumentalni mechanizmus respkt panom inzinierom a vyrobnym mechanikom BRAVO👍👍👍👍👍👍
Does it currently power anything? Or is it displayed somewhere.
Watching from Greece.hi everybody. WOW!!! That's an amazing thing to watch.
Industrial techno. I love it!😍
Be amazing to hear it under load if there is enough load available to put it under
It's a peaker plant! It was designed to come online quickly and provide Copenhagen power during peak demand when the steam turbines couldn't keep up. Amazing.
I'd have watched the entire thing. It could have been an hour and I would still be fascinated.
Blows your mind drastically fantastically.
Modern art and music combined.
Dude, put on some noise protection, if it isn't already too late.
Thank you for sharing. Good luck. See you again
Very interesting. I was sailing on slow speed diesel ships in the 60’s . This looks very much like the B &W double acting two stroke engines which were build in Harland and Wolfe (Belfast) just after WW 2. The diesels built by Sulzer (Swiss) were always my favorites. Depending on when this engine was built, it could have been the worlds largest diesel at that time, but modern diesels I believe, can go over 100k HP on a single shaft at about 82 rpm.
Yes its a double acting engine. Total pain to sail on.
The start was almost musical
I’ve seen photos of that motor but never seen run thanks very much
Amazing, a work of art!
It sounds like compressed air is used to start it. I like talking videos that explain what we're looking at.
If there was commentary, it probably was in Danish, which is double Dutch to me.
Yes it is. Pressures range from 450 psi for the B& W to 600 psi by the old Doxford Engines
Amazing! Such a monster in motion!
This in the back of a corsa will have the birds throwing them self's at me 😂
Used to watch this type of ship engine on test at North East Marine at Wallsend, on the Tyne, about 1960.
Real diesels have stairs and floors, but this one has an elevator
The Buzzz the Vibration in that engine room must be intoxicating...:) I've been on 100 foot + sport fishing boat. Love that rumble. I was working nights in Broadway stores I simply could not sleep during the day. Lay on top of the "City of Redondo" wood hull 65' boat bought by Roy & Doras Peters 1940'S. I would buy a ticket to fish but with Captians okay go topside with the emergency rafts and sleep like a baby.