GM Ultium Power UP Level 2 LYRIQ Hummer EV Charger Unboxing & Installation Guide (84922762)
2023 ж. 11 Ақп.
19 722 Рет қаралды
The GM Ultium Power UP Level 2 Charger is a high qualify EVSE and in this video we'll unbox it and show you what is involved in doing a hardwire installation to achieve 11.5kW charging at home.
GM Part Number: 84922762
User Manual:
drive.google.com/file/d/1JYs3...
Safety Manual
drive.google.com/file/d/1LMse...
Some parts lists show this as: F Cord Pkg
Awesome video, great to see these are coming out! Can’t wait to get one once my Blazer SS EV arrives this fall 🤞
Hi David, how did you get the WI-FI working on this EVSE? Thank you.
Exciting! Thx 4 the vid.
I'm sure you used a 6/3 romex cord...you're indoors so that is still within code..I put one outside...also there was need for a nuetral..I'm sure you capped that one.. I used all #6 wire even the ground was #6 which is standard code out here in Cali. Thanks for the insight here.. I didn't know that small connector was for a thermo reading nor did I know I needed that Bluetooth code from the back. GREAT VIDEO 👍🏼
Would love a follow up especially about the app?
Buying a 2024 Cadillac lyriq for my parents. What is the best charger to optimize charging capabilities of the car battery?
Thank you for the video, I have searched, researched for this package and finally I found your video. My GMC in my city are clueless. They were quick to sell the Hummer but that’s where it ends. Daily I hear “I’ll call you back”. Never do they return a call. All they seem to know is about the Level 1 and 2 charger. They have no idea where to find this one, including parts. I see the order number so maybe that will clue them in! 😢
Hi David! Sorry, I don't know where the neutral cable (white) is connected to the equipment, could you help me tell me where it is connected? That would help me a lot! Greetings!
Thank You! Very well done. Can you please tell me how to get the link for installation information? Thank You!
Does your charger hum loudly when charging? I was hoping to see it in use.
Do you have a video on the use of the GM Ultimatum GM EVSE and Application?
Nice job!
Thank you!
How to download the app? Thanks
How did you install the ground and Black wire ? the screws are not straight/reachable with straight screw driver and I can't get them tightened.
Did you have any issue pairing with iOS?
HI David. I don't see your follow up review.
Hi David, Great video. I just bought same unit as yours, however the electrician said he cannot hard wire because of some issue that GM has not resolved for the hard wire method. If I want just a NEMA plugged then it should be alright, but I do not get full 11.5 kw and there maybe ‘tripping’ issue with NEMA plugged. What do you think? Do you hear anything about hard wire issue with this charger from GM? It’s a cleaner look with hard wire vs plug in? Thanks
You can set the Circuit size in the app the prevent it from pulling to much power. The issue from GM is due up it being hard to get to the lugs to get proper torque. With an Allen key I was able to torque much tighter than with the included tools so I'm comfortable with my install
Manual clearly states 9.4kw with plug and 11+ kw with hardwire
Good video
How has this been working so far for you? I have just purchased one. How is the app?
Thanks for the great video. You might’ve said, but how long is the charging cable? Thanks! So I guess
25ft
Any updates on this EVSE?
nice Video. can you use this EVSE with non-Ultium battery car. i.e Chevy bolt EUV?
Yup. Ultimum is really just branding on this. It still uses a regular CCS plug and what not
@@DavidWaltermyer Regular J1772 Plug not CCS.
Nice and clean but not a fan of how your conduit terminated. Should be an end connector so no sharp edges. I believe that rear port is for true through wall connection, not underneath. I plan to run my conduit to the port you removed the plug cable from. Will need a larger connector reduced down to conduit size. Thanks for sharing.
that's fair. I'm not an electrician. That being said I did go back and add rubber bushings
Wow halfway thru the video and wondering why they made this to be so complicated
When is the planned release for the GM two way or bidirectional charger?
Available now
How does it go from 110 to 220 once installed? I just had mine installed but it’s only charging at a very slow speed. I had a 220 installed. Is there a switch somewhere or dial?
If used a receptacle Maybe one hot is on the dead blade since it does not use a nuetral and you're pumping only 120v to the charger?
Try adjusting charge speed in the App
Where does the white wire plug into
Hello, I have the same problem, did you know where it is connected? The white neutral wire? That would help me a lot
I see you had 3 wires and copper ground, you didn't show where they were connected.The install guide only shows the 3 connections. I had a hard time pulling 4 #6 cables and now dont know where to connect copper ground.
Only 3 wires are needed. I didn't use the 4th. I already had this wire laying around
@@DavidWaltermyer thanks for quick reply, I should have checked sooner,it wasn’t easy pulling # 6 solid copper.
Didn’t show any need for the white wire. Could have used 6/2 romex.
Correct. I already had the wire on hand so I put it to use.
Will this charger do V2L?
No
How do you shut it off when it's not charging?
Are the lights illuminated when not charging? Is there a way to disable or dim the lights within the App?