Will it run?!? **RARE** Minneapolis Moline WHEATLAND with propane!
2021 ж. 17 Қаз.
318 866 Рет қаралды
Here we go folks! For almost a year now people have been asking about this ol tracter after seeing it in the back ground. The camera messed up and we lost alot of parts from this video, I hope you guys still enjoy!
Mortske Repair can be found here!
/ mortskerepair
Merch available at
www.puddinsfabshop.com
Patreon page
/ puddinsfabshop
Instagram @puddinsfabshop
inquiries email. puddins.fab.shop@gmail.com
SUBSCRIBE!
ATTENTION ALL! Mortske’s video with the dualing datsuns won’t be up until next Monday! The merch website will be down for a week to allow us to catch up on orders! We are behind from our wedding week! The audio on the camera messed up on this video and I cleaned it up the best I could! Also there’s a editing issue in there where the audio don’t match the video for a few seconds, somewhere around the towing the propane trailer out mark! Sorry about that! Hope y’all enjoy!
Newly subscribed, but I have an issue. 1 upload a week just is not going to cut it come on P-dub we need more. Thanks for the videos
That’s all I can do unless you want halfass videos and me to not spend time with my family. I see neither as an option.
@@PuddinsFabShop No sir, just saying this channel is entertaining and we cant get enough
cant wait man!!!
@@PuddinsFabShop People thinks it takes an hour or two to make a KZhead video 😭😭.. If only they knew...
For people that are curious: The Mighty Mo G1000 was a late 60's tractor. It was powered by a MM 6 cylinder engine. 8.3L 6 cyl engine, well past the 500 cubic inch mark. Rated around 100 drawbar HP. Obviously, being a 6-10 ton tractor(depends on weights) HP is not really measured for it like you would a car. Redline is probably somewhere around 1900 RPM. This one they have is pretty rare. They made a smidge over 7000 of the G1000 over 4-5 years, most were diesel, most were not wheatland. Lots of people would ditch the cab because it is a tin noisebox, but that has made factory cabs super rare too. This tractor in good form will freeking CHUG like a train. Mighty Mo diesles roll black smoke enough to make any cummins/duramax millenial wet their pants. I doubt the LP version will, but it will still chug like a son of a b. When this tractor was built, White(made trucks) had owned them and Oliver, and Cockshutt(mostly Canada). After this tractor, they combined this engine with Olivers transmission and made a G1050 and G1350. There weren't hardly any painted yellow though. I am familiar with these because I grew up with and now own my Grandpa's(then my Dad's, and now mine) '65 MM U302. Tractors like this can sit for 40 years and fire up with an afternoons work, provided they weren't parked because of a breakdown. There's no computers to fail.
504 cubic inches. Mine has a HD800 . THE vista g1000 is alot more desirable.
I will state the obvious....They don't make them like that anymore.
Thank you for the info. Very interesting 👌
@Kirk Oglesby At least they're really expensive. 🧟♂️
Thank you for the information, I was curious
"Don't say crank too loud or the neighbors might be coming over" lol I died at that.
You laugh but it's true!
Same lol
Just snorted out my drink at "how does jimmy fit in there? he teleports." 🤣 so glad you guys did this collab. Thanks to both of you.
Hey Airman😅 as a 23 year USAF veteran and spending hours on B-52’s, I want to thank you for your service and thank you for the great content you put out on KZhead.
Thank you Sir for your service.
Thank you Sir.
Thank you for your service Sir!
Thank you Sir.
Buddy that’s one of the best videos yet. You and Mortske work pretty good together. I really enjoy seeing your dad in the videos. I bet he is excited to see it run again, grandpa is smiling right now seeing you and your dad bring it back to life.
Jimmy is the man!!
I ain't never laugh so hard, Puddin and Morskie together what a great combo.
This is my favorite video. You and Mortske are awesome together you two are just natural together. I hope you do another one.
“Don’t say crank too loud or the neighbors might come over”🤣
It's a rough enightborhood!
This is too funny. What a match mad in sammich spitting out heaven.
Amen bro I like both of these guys.
Made in Oklahoma Heaven!
See now ol' Mortsky was singin' this song on his channel about how he has a skid steer that is so superior to the Towrolla. Now you got a Minneapolis Moline for your stubborn machine moving tasks. Great stuff Puddin.
Ol girl didn't miss a beat. Like it was put away yesterday. Amazing!
Awesome collaboration! You, Mortske and Jimmy! I’ll be laughing for days!😂
Jimmy made the show!
Excellent collaboration, been watching Mortske forever, found your channel a couple months back and been watching them all.
Same here. Mortske kept mentioning puddins. So I had to see what it was all about. And Hot Damn im I glad i did.
Same I saw mort from puddin and it is a great collaboration
Thanks for watching us both!
Millennial Farmer and Vice Grip Garage would both appreciate this project. I use a gun cleaning set for areas like the coil connection on the cap. The different size brass brushes with varying lengths of rods work perfectly.
Those also work good for oil passages
😂😂😂😂"MINNIE MOLINE" rides again!!! With a bonus cameo of pimp down snow angel? Are you bleeping me? Pure Pudding gold Jacob!!!$!$!$$$
That was great both Puddin and Mortske in one video, but you know Puddin's dad is the star of the show!
Jimmy for president!
Your pops showing you how to drive that ole girl was priceless brother. Love it!!! God bless you and your family. And thanks a ton Mortske for playin along. Love your channel too bud.
Was cool to see you sitting on ole dads lap like when you was young and learning how to drive...you could tell dad was proud...
Todd his pops was standing behind the seat leaning over the propane tank. Not a chance in hell they would have fit with him sitting on his dads lap lol
Dig man still looked like it yea that was a small cab...
Now that would have been a sight to see! hahaha
“Sit in the middle and drive skid steer” lmfao 🤣 too much Mortske
Don't think on it too hard!
That old girl just woke up and went straight to work-I love it! 🤜🤛🤟🏻
“Eh if it blows up, we won’t know it.” Jimmy 🤣🤣🤣🤣🤣🤣🤣🤘🏻🤘🏻
He's a wise man!
Loved the show..but really love you and your dad's relationship.
I like the friendship you and Mortske have developed, but I admire the relationship you have with your Dad. I had a good relationship with my Dad, moved back to where he lived, to help him, and got to spend his last five years with him. Aside from Jesus, family means the most.
Mortske the fella that talks funny and Pudding the fella that talks funny, hell my favorite two you tubers. Let's go Brandon.
A different type of funny!
You two feel like brothers on camera, awesome video guys. Tractor is pretty cool as well.
This was a joy to watch. I hope that we get one of these every couple of years. Jim, Mort and Puddin, a great Trio.
Hopefully I'm allowed back!
My home town is Moline, Illinois!!! This is the home of the John Deere Company, and the International Harvester Farmall plant.!!! Part of the Quad Cities!
Puddin Pop's got a heck of a tractor, thanks for showing it off!
"Sit in the middle an drive skid steer" .... I haven't heard that one in a while. LOL
Had to dig deep for that one!
Mortske after Puddin’ hits his bumper… “That’s why we can’t have NICE THINGS!!” 😂😂. I’ve heard that before!! 😂😂
When I was in high school (late 80s) I worked on a hay farm. They had 2 tractors: a Massey-Ferguson and a Minneapolis-Moline. The "Ol' Mole" was the bigger tractor and wasn't used every day. More like heavy jobs, or when the Massey was on injured reserve.
2 of my favorite you-tubers finally doing a collab
That tractor is awesome you really made your dad's day getting that thing running can't wait to see what else you have in store for us keep on rocking!!!
Gotta say I ain’t a KZheadr or a mechanic. I don’t know engines and I don’t know editing. But I do know you are one pretty skilled man when it comes to engines and dang funny to watch. Keep up your good work brother I love to see it.
Really enjoy your dad when he shows up on the channel. Great work with Mortsky.
Puddin’s sad says, “someday, this will be all yours.”
Do more farm equipment will it starts!!!!!! Love this
Propane is the easiest to get started after sitting. But man sure burns it up to farm with. We have a few old Molines around the farm. The tractors used for pulling are propane powered. Love the calibration. Hit the 👍🏻 for each when y’all post them.
That Hank impression was spot on🤣
Man, I lost it when he busted out that Oklahoma toothbrush.
ONE OF THE BEST COLLABORATIONS EVER!!!!
Jimbalya, Sir Morticus and Puddin-fied.. it's the TRIFECTA of Will It Run !!
your dad was super excited and thats all that matters
Here I am thinking what a video this will be, mortske and pudding in 1 video, but all you've done is prove jimbo is the real OG up in here.
He's the man!!
I've been waiting for this to happen and it didn't disappoint glad you are mortski got chance to colab and good to see dad too
When I was young Amish boy I worked on amish farm . WE had a square fender MM to run thrashing machine it was great tractor with a lot of power! Brings back a lot of good memories!!
The algorithm is slacking I should have been recommended this channel long ago. Subbed
Jimmy is a national treasure. All hail jimmy 🙌
love to see poppa puddin getting some screen time and it was awesome to see mort too
This is the first of this ive seen, but That moline multitool is pure gold.
Hot Damn shes a runner! Great colab with Mortsky👍👍👍
O yeah this is going to be awesome. I’ve been waiting on this all day. Just smash that like button on the way in folks, these two together is going to be hilarious 👍😎✌️
Been waiting all day! Love Puddin Mondays!
Kept waiting for Mortske to tell Jimmy to think with his dipstick!
Haha, you know I did!
Most collaborations are honestly disappointing, but this was great. You guys are very natural together and complement one another. Your dad is great too. Very entertaining video!!
Are you sure Mortske is allowed to cross state lines?
If he keeps his shoes on. Now, if you go to Arkansas, they make you leave your shoes at the state line. Its state law.
Don't tell them I left!
88k subs way to go bubba!!! I hope it keeps on growing for ya!!!
Seriously you and Mortske did an awesome job!! Again love the videos!! Cherish those moments with pops! They are priceless!!
Vacation Mortske (also known as drunk Mortske) is the best Mortske lmao
You guys look like you went through several different levels of inebriation. 🤣😂 Great video!👍🏾
the nylon in the threads on the drain plug is for locking the plug in place.
This is your best video!! I love the teamwork of you and Mortske, together! You guys crack me up !! Plus, this tractor, G1000 is from my hometown of Moline, Illinois and was made from 1965 to 1969. I remember visiting the john deere factory, International harvester farmall factory and the US ARMY Rock Island Arsenal,where the tanks were made, when I was a kid during the Vietnam war, 1968- 1969 on open house days, it was for family and friends to tour factories and entire grounds with my brothers,
New to your channel but Your saying I heard in the first video I watched of yours. “Sitting on your ass will not finish a project” inspired me to go out and buy my own old project. Last week I grabbed 1951 4 door shoebox. And also started a channel to show the progress. Ordered parts from Shoebox central thanks to the video of you riding to the show and helping them setup early. Great content keep up the good work.
Keep after it man!
love the camaraderie.keep on rockin puddin..and mortske love both your shows this is awsome.thanks guys!!!
“I dont know, I google that shit” 😂 I love it ! This video was definitely a gooodn’ !
Jimmy has a google box for that.
When using a 20 lb. Grill tank to fill another tank, you need to turn the 20 lb. Tank upside down. The 20 lb. Tank feeds the grill from the top of the tank. To get the liquid propane out of the grill tank the tractor needs the grill tank upside down.
Another thing that works, though slower, is to make sure the 20 lber is warmer than the tractor tank. Problem of course is the little guy will cool as the liquid goes to vapor so it needs a heat source. The propane will migrate to the cooler tank and condense there. This is how I fill my 20 lb tanks from my 200 gal generator tank. Sit the little guys in ice water for a while and you can hear the gas flowing from one to the other. A couple hours and you have plenty in the 20 lber to grill for some time.
the part with the burritos was funny Mortske with no hat caught me off guard
Hell yeah man! Love seeing smaller YT channels hanging out and having fun. Hope to see more of this!!!!
LOL Pudding was secretly saying " ILL DRIVE THE SKIDSTEER" , also pudddin you all killing me with all the dam commercials every 3 minutes.. ffs
Puddin don’t put the commercials in. You need KZhead premium to avoid commercials or KZhead puts them in there automatically
1:01:28 I thought you were sitting on his lap lol Tell Mortske he makes one more mean joke about my dad we gonna have some Oklahoma problems. 👊🏻
Mortske definitely has an abrasive personality lol
Your dad is awesome, I really enjoyed his part in the video
Oh you just simmer down Nikki!! Jimmy and I are the bestest of pals!
Call me Nikki one more again…
Easy now, don’t forget the disclaimer at the beginning of the video
Tweddle Dee and Tweddle Dum havin a Bromance! Too fun!
Ole Dad knew right where that screwdriver was, it was the starter key! I loved those channellock/hammer/screwdriver/pliers! I'm thinking about turning in my Leatherman I.T. Toolkit- knife/pliers/wire stripper/saw/screwdriver/scissors/file/ruler/can opener. Or just getting one to balance out the Nerd Belt. Awesome find!
I’ve got some sammiches and something to watch. Thank you gentlemen.
Jimmy looks like a worthy opponent for my old ass to arm wrestle. You other guys, not so much. I acty fan a Chevy 350 on propane for some years before propane lost the price advantage. Those liquid draw units use water from the cooling system to keep the "carb" from freezing because the propane expands about 270 times it's liquid state. I can tell you that the engine wear on the Pistons was almost non existent, but valves in those days were a little soft for propane
Congrats on the success! "Arm Swing" Power move. Classic.
When you mentioned maybe getting the MM goin’ a while back, I had my doubts that it would run again. After seeing that oil, I was thinking it would’ be near impossible. Can’t believe that thing fired up that easily! Great video man. Awesome to see Pops and Mortske make an appearance too!!
Okay morski with a cute little access hole
Yeah, best get all those acorns off the engine block. Otherwise when you start it up the manifolds will get hot and you'll burn your nuts.
You don't wanna singe your nuts!
We need a part 2 on this fabulous machine with dad
Definitely want to see more Puddins/ Mortske videos. Both of you are a hoot!
I bet when mortske seen POTT County he was ready to run for the hills 🤣🤣
Nah, he's from Dakota.
I fit right in!
🤣🤣 I'm from a few county over Oklahoma is not all that bad! Lol
@@MortskeRepair Just a little different accent.
@@keithschneidly3922 little less Canada here lol
Great job Puddin', love the show ❤️ Y'all need a PayPal Donate button on your website my friend! And a donate link in every video description. I'll be the first one to chip in 🙂
HOT DAMN!! HERE WE GO WITH ANOTHER GOOD ONE!! YYYYEEEEESSSSS!!!!!! 👍👍
Awesome. Puddin and Mortske. Twice the entertainment for the price of one. Jimmy don't mess around and put the old Minne-Mo to work right away.
Mortske its cajun pies not donuts ☕🍩🍩🍩
Tell em pops!
And biscuits and gravy.
I'm having Cajun Pie withdrawals! And Taco Boy burritos!
Great video you had your dad smiling he loves it keep the videos coming
This is the longest KZhead video I have watched in a long time, good stuff Puddin' Pop....
Amazing after years this lovely old beast wakes up and starts earning its keep. Great collaboration video I've really enjoyed this.
What a great video!! Awesome to see something that old come back to life.. you 3 were freaking hilarious to watch can't wait to see the Datsun dueling video!!
I asked you awhile back, if we would be seeing pops on the show again, and low and behold he joins you along with Dr Morske!! To bad we don't get to see inspector duffske rat huntin!! The three stooges back in action!! Thanks for sharing!!!
He woulda been all over that rat!
We had a 50s model Minneapolis Moline on propane also. Damn fine tractor. It was a workhorse. Also had an early 60s International Harvester tractor. We used them exclusively until the mid 80s when we upgraded to newer IH tractors.
That dozer blade is a WALDON WD8. They made products in Fairview, OK. Good STOUT & Overly built items. More tractor revivals please & updates on this one!
I knew someone would appreciate that dozer!
@@MortskeRepair i collect sales brochures thousands... Lol. It's considered oddball stuff 👌🏻🙂
You and Mortske are pure gold together. I enjoyed both of ur videos together tremendously. Please do it again. Thank you
The vidsky came out good. It was fun to watch 3 unique personalities be their weird selves and have fun doin it.
Dude, I wish I could give this a 10ft thumbs up!!!! Hands down the best stuff I've seen in awhile. Y'all are a bunch of great dudes!
Good to see the two of you tinkerin together after all the fun trash talk ya give each other 🤣
Thank u all for this great video together. Wtg getting it running over tree's.🎉
I grew up on a farm with a fleet of propane powered Minneapolis Moline tractors. Dating from the '40s to the '60s.
Well done Puddin :) , Mortske Repair :) & Puddin Dad Jim :) that so cool how long sat around on feild for and got started up also tune and fix she winner! My one Morris got M&M tractors on his farm all in great shape to and have tell about this video check it too also watch it!
Another awesome viddy from Puddin. Thanks ! And thanks to Mortz for comin down, and to your Dad for doin this too.