Check out Corsomotions Build series for different types of LED boards and controllers:
bit.ly/BuildLEDs
Also check out www.yuniqueled.com
FOLLOW ME ON SOCIAL MEDIA
IG: / flyryde
FB: / flyryde
Twitch: / flyrydechris
Check out Corsomotions Build series for different types of LED boards and controllers:
bit.ly/BuildLEDs
Also check out www.yuniqueled.com
FOLLOW ME ON SOCIAL MEDIA
IG: / flyryde
FB: / flyryde
Twitch: / flyrydechris
Would definitely like to build something from scratch myself. Open a set of lights and be able to make them completely unique... I love that there are guys like yourself who teach and give ideas and inspiration. Keep up the great work 👍🏼👍🏼
Wth. This is awesome. As a car person, i always wondered if there were people out there who did lights, cause really, no one really does when it comes to modding cars. Always just power, bodywork, and chassis builds.
I would like to know more and learn from you.. i can tell you are a humble dude
I have my moments, lol. Sometimes I push back against being helpful when I think people suck and don’t deserve the help 🤣🤣🤣. Just a normal dude, but i AM humbled that you’d like to learn from me 🙏
Your videos are great! Like how you break down options and their ups or downs. Keep it up sir.
I wanna really do this to my 78 Malibu classic Gbody. Love the look of these lights man, just clean.
I subscribed to your channel just for the fact you are willing to teach others and benefit your family at the same time. Its just a drop in the bucket but i wish you success on it!
Love this dude 💚 makes a lot of cool stuff 😎 if tuning isn't enough just be different 💜 still happy with the build GTR headlights and stoked on what's coming up next 😁
As much as I love the convenience of being able to just buy it, I’d definitely would love to learn how to do it myself
Whenever I see an upload from you, I know it's going to be a good day!
Chris, thank you for the breakdown categories. This, as usual, is helpful. I would like to, for myself, build them have the drop in built. Like what your Volvo person (Tom?) Is doing. Thanks!
I have a 1979 Pontiac firebird trans am and like the look of sequential taillights but I like the look of the lights that you have on your presentation that are the factory ones. I want to learn how to get that look as I restore cars as a hobby.
Hey Chris, I found you last week while searching for an expert in the field of headlight modifications. I was really searching for a guru to lead me to a proper high quality manufacturer of a high quality halos and preferably a set of iconic halos to upgrade my 2007 ore LCI e60 BMW 550i. If it goes well I’ll tackle my wife’s e90 3 Series. I’m glad I found you. I have watched hundreds of hours of your channel so far. I have the knowledge to follow your fast talking self lol, but the ability to solder those tiny ribbons and wires onto little circuit boards. I just don’t have that skill set. You make it look like child’s play. I’ve picked up several pointers that are going to make my builds easier.I had a lot of the tools already, but I’ve also gone out and bought a few that you’ve recommended. Anyhow, I don’t plan on making a business of this, I just want to build a few sets of lights in my own vehicles . I can’t afford it at this very moment, but I’m buying your black hoodie through Spring. I’ve spent a few bucks on tools this week and I’m disabled. I really have to budget things out. I’ll keep watching and learning while you keep putting out the DOPE vlogs. I’m east of Raleigh, North Carolina. It’s funny how the internet can bring people together.
Love this dude 🙏 warms my heart. Thank you!
One thing I tried on the center light strip on a dodge vehicle was buying the trailer wiring harness for my car and putting some of those light strips that people put on the back of their truck bed in the tail light housing. Depending on the vehicle there was a slight delay with the actual corner markers on the vehicle
I love that the United States has laws against some sequential turn signals because there isn't a large enough potion lit initially, yet it's totally cool to just have the red brake light also turn off and double as a signal 🤦♂️ Soon I'll be adding a second set of amber lights to my Chevy S10 for separate turn signals. Always hated brake/turn combo tails.
Try to hunt a set of brazilian s10 tailights if you can. They have a seperate amber lens built into the housing. It requires and additional socket than the US s10 tailights though.
@@furgulley8077 I love the Brazilian market S10 lights! If I didn't already have a set of old school oem style clear tails I'd definitely be after a set of those.
I will never understand why we have never required all indicators, front AND rear to be amber. The safety aspect is a no-brainer. All of the British cars I have owned I have fitted the UK-spec amber rear indicator lenses and am in the middle of doing it again on the series 1 XJ6 I recently picked up.
Signal Stat 900’s have been around for a loooong time. They’re the old metal turn signal switches with wiring inside to use brake lights as turn signals even with brakes applied. I believe modern ones are a hold-over from those days. On a lot of semi trucks, they’re still that way. I don’t have a problem with it.
I want to do something like that with my firebird. Just an amber sequential somehow on my tail lights.
Im the total diy guy thats why I thank God everyday for the oppertunity you granted to learn the diy side of things! LIGHTSMEN TO THE WORLD 💚💚💚💚@FLYRYDE @LIGHTSMENACADEMY
Awesome video. My option will be type 3 and 4. Thanks again 😃😄😁
That's fair. You put the time, money, back engineering to make it work, You should be compensated for this. sub'd.
Very informative vid!! Thanks😎👍
Love your videos. Only wosh i was patient and had time tontackle this on my own. Serious question..... Do you or any of your pals do custom tail lights. Looking for someone to do a project for my gen 2 toyota sequoia.
What’s up man great video can you tell me where can I buy those led panels thanks
This is a subject I didn't expect to exist a video about😂 Well done also👍
I was way behind.. Many developments 😲
this has me thinking about modifying the rear brake/turn lights on my '91 Jeep Cherokee XJ
Hey I was wondering if you could link those exterior led strips that you showed in the description?
Great job! Hugs from Brazil.
I have the corso motion ones you showed. I have the red and amber fur the tail lights and white and amber fur headlights. But j sunt want to spend a lot of time soldering resistors and all that in there. I'm thinking and wondering if it will work where I take the corso led and a 20 dollar sequential strip from Amazon and heat up and take off the cheap led and solder on there the corso. That way i have the sequence set up for turn signal and have the resistors on there. I tried it and it lit up but only did one. Dont know how long it would last though and if it will work if I do to whole strip.
Where do you get that box that has switches to control the headlights/tailights? You also you turn signals on as well
Got a set of spyder tail lights for my truck I’m looking to add sequential tail lights too. I’m opening them up anyways to paint them and do led reverse cubes. What’s the best way to add the sequential signals, by best what way would I go about it to get a true plug and play set up while using the led boards that come in the tail lights
i’m probably going to try and copy the factory board but separate the grounds out individually to be able to program them but i need to figure out how to work with red/amber bi-color LEDs
I own a M37 and there is next to 0 mods so this is amazing 👏🙌
Do you have anything for a g35 or any light builds you have up?
Just wondering. Are the strips at 2:25 trimmable? Or would trimming them down ruin them?
I would love to take the class!
Whats the site for the unique led that look like the corso motion ones.
Greetings from Puerto Rico
Factory would be nice, drop in is cool, hijacking the stock equipment is always awesome, I love modifying things , custom all the way, I'd build my own car and house if I could, heck I'd even build a body for my self if possible! 😆
You should make a drop in for our mazda 3 sedan, bro, that would be awesome.
I’m trying to learn how to do some led stop lights, turning lights, and running lights. How can you help me? I don’t have the box yet.
Hey man I just bought some new sequential lights but my turn signal on one light stop working and I put the original bulb and everything works fine
super humble and the best to learn from imo
Is it possible to use a pixel panel as a tail light ? I'm custom making tail lights for my Ute.
This vlog series are soo damn cool & fun!
Glad you like it! Some days are harder than others to get videos shot and posted 🙏
I want halo rings on my civic. Just love the look on other cars. Have a tutorial?
How do u open up car side door indicators they not adhesive sealed like headlamps they factory super glued
Do you have a video for 2020 ford edge St ?
Can you make these for my 1972 grand prix? If so...IM READY ASAP!
I would really like to get into doing this i have built cars all my life I do custom interior work, body work, wiring, and engine work, im more into custom stuff that nobody has I like being different. Im an artist and creator so I don't think it would take long for me to learn all this is there somewhere I can go to do that
I just want to be able to get some modified tech boards for my wrx and do them myself but he dosnt make them anymore 😓
Can anyone tell me what type of Dremel blade that is I've searched Amazon but can't seem to find that exact blade.
where do you get the snap apart leds
@Flyride What size is the 240 z led board? I'm trying to get one of these boards to fit into my acura tl type s tailights.
I’ll check for you. I’ll also forget, so remind me tomorrow lol
@@flyryde Lol for sure.
Is that a TieFighter on the shelf behind you?
im in need of a set of custom tail lights for a custom build I'm doing, can you help
would you make a set for me on a mazda b2000 taillights
Can I see an example of Honda Civic (ek4) hatch taillights
Where do you offer classes?
Whats kind of leds are on the oem gtr board? Is ist a special one? Or is it a normal led?
It’s called a PLCC-4
How do I get into this I would love to make this into a career
Has nobody done them with bulbs like a new edge (99-04) mustang?
Can you show how to change the Break and Turn signal Blub on the rear Of 1964 Buick Skylark rear break , turn signal lights to Sequential LEDs lights????
So where are these classes?
Where are the classes located
Where to get these pcb leds at 1:40? P.s. cool video
I would buy a set of programmable sequential tail light assembly if you sell custom tail lights.
Anyone that has a lexus rc 350, what have you guys done
Hello, can you make it for me for my BMW 6 serie e63?
How do I get a set of the wrx led panels?
You can modify your stocks
Hello boss how to remove the red colour from tail light to make albino type.....
How to make red plastic turn into clear plastic? You just need a red pigment sucker. It’s a kind of plecostomus. You’ll have to fill up a bathtub with water, and soak the lights for 3 days, then add at least 4 of the fish to the mix and they’ll... just kidding. You can’t make colored plastic clear.
Hahahhaa tq
I need some for a custom harley road glide
I’ve heard that so many times it’s crazy. Somebody needs to start a Road Glide specific custom lighting business. I’m 100% not gonna do it, but clearly there’s a demand for it.
check out gator class custom
I can’t find the UniqueLED website for those pcbs!
www.yuniqueled.com
FlyRyde good looks man, also I placed an order like 10 days ago from corsomotion. just curious does it usually take this long for you? they haven’t even shipped it lol
Estoy interesado en las clases 👏
There is a problem with these DIY sequential turn signals. They always start with the running sequence first. If you then just press the turn signal lever quickly and release immediately, only a small part of the turn signals will light up and go out. On all cars that are delivered with sequential turn signals from the factory, they always start with the entire turn signal light up, then the sequence starts flashing. If it not light up the entire turn signal, it can cause serious accidents.
Where can I find those unique led boards
www.yuniqueled.com
@@flyryde thanks bro
Make me a set for my lexus sc300
I want to buy a couple Led Tail Lights for Honda civic 2013
I wanna do all of thee above
DIY FTW....yo anyone got info for sequential Equinox lights? (2017 body style)
Do you Do paid jobs? For shipping
350z taillights are so boring ever modded a set?
Modern Dodge challenger u can oven bake them
E36 COUPE
Yes I see the wrx. And I wait every day for the video 😭😭😭 I opened my tail lights the other day. Lmfao. I also joined 301 I wanna modify the factory board I’m not into the premade that everyone has. I wanna be different
Did you!! That’s awesome bro, make sure to message me on IG. I want to get your feedback and work directly with you to make sure you get a dope outcome 🙌
I don’t have any social media I emailed you though. Do you have Snapchat that’s the only social media platform I have.
#4
Huh maybe I should just send you a set of mine
Thanks Leon. Truthfully I have way more work than I can handle. What’d make me REALLY happy is if my videos help someone else to produce awesome lights, that would be able to take on jobs from dudes like you 👌
Yea I saw that during the pans around the garage, I’m sure they aren’t just for decoration. Wondering if you’ve worked on any newer Ford lights recently?
They don't make them for my squarebody but even if they did I would still build it
I'm from South America... can i send up a pair of tail lights for you to customize for me?? Or if you can put me on to a professional shop that's trustworthy i'd highly appreciate. Thing is, we get MOSTLY (like 92% of our cars down here 🇬🇾 Guyana) japanese cars here and the one i'm working on is a Toyota GF-AT212 but i can't seem to find any modded lights for it anywhere. I'd buy the headlights and the tail lights n ship it up to you (or whoever) and hve them work on it. And when they're finished hve them ship it to my bro's address in Pennsylvania and he'd ship it bk to me. Ofc i'd need to know the cost first... idk if you can assist, thanks.
I am all about customization. Im an artist and im not afraid to get meticulous with detail especially when it contributes to that omgidkwtf factor! My thing is that there is, as with many projects i take on, endless possibility. I spread myself soooooo thin! I have taken 8 years on 1 painting. I have also put countless man hours into attempting to solder and cant even produce 1 successful connection. Theres soooo much to learn and its kinda overwhelming. My 02 lancer can testify that i can do amazing things but i may be in over my head with these headlights. I mean, they look like the ass of a thousand anuses. Smh
You could make good money fixing peoples led tail lights that’s are not working properly. I had to pay $300 for a 2018 Chevrolet traverse rear right tail light not including labor. Due to the fact that there is no lightbulb you can just replace. Although it does have an LED piece that can be replaced if the part was available. I have a video in my channel if you wanna take a look at it you might be able to fix them and sell them on eBay.
please upload to bitchute
Lmao just got rid of my 2013 Volvo S60 R design, there's nothing on the market for them
Did this guy die?
you're already getting money from youtube though...
Yeah? Not sure of the context to your statement? Out of curiosity how much money are you thinking I make from the channel?
@pinko amd you are getting a tutorial amd video for free instantly instead of ordering as seen on tv for 19.99.
They should be banned, there's a brief period when if you look at the car quickly you won't see that they're indicating, because of the time it takes to fully illuminate. That can cause MAJOR accidents. Bad news. 👎🏻
Won't watch anything with commercials in the middle. Bad enough with the jerky amateur video.
Do you ever do custom projects for followers?