DIY Different voltage parallel connector

2022 ж. 3 Там.
6 097 Рет қаралды

tested voltage:
12v n 13v
12v n 36v
12v n 48v
busted on 12v and 74v

Пікірлер
  • It looks like nothing is being taken from the smaller battery till the voltage on the other side is lower. Great idea though, I could parallel packs without them matching exactly and the higher would power the bike till they start to equalise and then you'd be drawing from both cells. Great build.

    @a-aron2276@a-aron2276 Жыл бұрын
  • Basically a diode on each battery output. 👍

    @xlines@xlines Жыл бұрын
  • Wow sir na aamaze ako sa mga DIY electric scooter mo... Sana makagawa ka ng dual hub e scooter pero 3 wheels un bang no need to balance ung e scooter for PWD sana sir.. thank you 😊😊

    @trendsflare3557@trendsflare3557 Жыл бұрын
  • So yun body diodes lang ng mosfets ang nagagamit. Required ba talaga yun diode na 1N5408 kasi madami na yun nakaparallel na diodes nung mosfets and it looks like nakaparallel lang din naman sya sa mga body diodes. Thanks for sharing sir magagamit ko ito sa power station na gagawin ko.

    @SolarMinerPH@SolarMinerPH Жыл бұрын
  • I see. Ganyan pala purpose ng "parallel" connector. Kala ko parallel load. Ano po output voltage pag 12V n 48V? Sabay po ba mag discharge yung dalawang battery pack?

    @sicat2345@sicat2345 Жыл бұрын
    • kung ano pinaka mataas na voltage yun ang lalabas.

      @albertnario4877@albertnario4877 Жыл бұрын
  • 👍🏿👍🏿👍🏿

    @sherwinalberto6166@sherwinalberto6166 Жыл бұрын
  • Bossing pa convert ko sana kotse ko saan ka banda

    @stephenrodriguez2053@stephenrodriguez2053 Жыл бұрын
  • First comments 💪💪

    @Hemanthkumar-ur6wi@Hemanthkumar-ur6wi Жыл бұрын
KZhead