Axe is up for auction here! www.timothydyck.com/products/... Set a Squarespace website www.squarespace.com/timd
Пікірлер
No back ground music is great Tim love hearing the natural sounds keep it up!
@user-uh8vw4yu6g16 күн бұрын
So calm, quiet and refreshing. Really enjoying the video so far
@johnreese133716 күн бұрын
I enjoy every "bit" of that axe. You've had me anticipating for a week now with those teaser shorts.
@coreyadams412916 күн бұрын
That video was great. I loved the beginning oj just raw filming with minimal sound. Great build.
@jannisalexander111 күн бұрын
That axe turned out quite nice. If you make another you should give the buyer the option to have a curved or straight handle. Most firefighters I know that carry an axe opt for a straight handle since they tend to use the spike more often than the axe face.
@Joe___R16 күн бұрын
Wow! As a firefighter both blue and red card certified, that's a really nice looking axe! Thank you for taking time to forge, film, edit and post this video.
@donaldmatthies602616 күн бұрын
That axe looks amazing and the handle is perfect! 👌 I love the way you've made the box, so you could use the box to display the axe when you aren't using it. Absolutely fantastic work and I hope she goes for a great price 😊👍👍👍👍👍
@Zogg128116 күн бұрын
I love these videos where you let the tools do the talking. Great job.
@caveweta16 күн бұрын
Yes, I really like seeing the forging of a unique piece. Please keep going!... It's a beauty!
@alifetomake16 күн бұрын
You’ve been killin it since I found this channel years back. This one was 👌👌❤️
@Little_River_Forge16 күн бұрын
You really out did yourself on this one Tim. Beautiful work and story telling, really enjoyed feeling like a fly on the wall to the creative process. Thanks for sharing with us.
@derekhartley448016 күн бұрын
I watch a lot of forging videos. Watching you draw out that pick is as good as it gets. Beautiful axe, excellent video, fine storytelling!
@BangTheRocksTogether15 күн бұрын
Rare tool build, great video, and the end product is beautiful. We shared this video on our homemade tools forum last week 😎
@homemadetools6 күн бұрын
That is an awesome piece of merch, my man. Beautiful, stylish, practical yet brutish and Powerful. Your skills are really well developed, not only the smith side, but presentation is off the scale. Been watching since yonks back, but this is some master level work.
@grantcox476416 күн бұрын
Beautiful work , mister.
@narcisoespinosa94116 күн бұрын
Love the video. The pacing and presentation were awesome.
@benthompson983416 күн бұрын
Awesome build Timothy. Keep it up 💪🦊👍
@rocky307516 күн бұрын
Awesome axe tim! 🇨🇦✊🏻
@virtusleather16 күн бұрын
Top shelf, one of your best videos. Amazing outcome.
@craigbryant3116 күн бұрын
Really enjoyed this video. The axe is amazing, one of my favorite of all time I think.
@DanielHenry-kn8nk15 күн бұрын
A Pulaski of the same size would be great I enjoy your videos
@familyonamissiongo479016 күн бұрын
One offs are cool. Would like to see more.😀
@jimmyrk316 күн бұрын
I second the Pulaski Idea. And then a crowbar too. Make it a set
@osbdaniel116 күн бұрын
I always enjoy watching you create these pieces Tim.
@wdworden16 күн бұрын
nailed it. loved the extended intro
@GordonSanders16 күн бұрын
I worked in my dad's metal plating shop and we had an axe come in from the local fire department for a nickel coating as a retirement gift. Being a Maine I asked to do the plating. The axe looked just like that one, and now I wonder if it was. Nice work!
@scottpageusmc16 күн бұрын
😮. Timmothy beautiful job. Keep up the great craftsmanship and hard work my friend. Forge on. God bless.
@SchysCraftCo.16 күн бұрын
What a piece of art, Tim
@jkr300812 күн бұрын
I really miss cutting with a torch... it was always a ton of fun!
@epicname154916 күн бұрын
I like it better with the rough and raw forge texture.. with only the blade ground.. It just looks great.. When you grind everything, it just makes it look manufactured and kinda takes away that "Forged" look that I love so much.
@calholli16 күн бұрын
Looks hella awesome Tim!!👍
@greenthumbprepper865316 күн бұрын
Great video Tim , amazing job you did there , your workmanship and attention to detail is outstanding . Love to have a go making an axe one day . Here in New Zealand there are Kelly axes that have made in Canada on them -good axes . All the best maté from one Tim to another 👍
@JoeSmith-wd8ks16 күн бұрын
Absolutely fascinating to watch Tim!
@nickfranklin186716 күн бұрын
Thanks for sending me the reminder email about your latest creation. Well worth watching you create something so beautiful.
@ThemusMaximus16 күн бұрын
Great stuff as always, Mr Dyck. I always enjoy watching you in action.
@cerealport272616 күн бұрын
Love the one offs great video.
@Christyleadbitter16 күн бұрын
Amazing as always!
@jensbarsoe547116 күн бұрын
Love it! I'd love to see you do a small 1912 ball-pein hammer with what you've got left. I love the bigger tools...but I use my small tools more than anything these days. Keep up the awesome work! (loving my 2 pound cross-pein hammer BTW)
@kd5byb16 күн бұрын
Great video Tim!! Loved it. Keep the forge lit!
@matts801316 күн бұрын
That axe is amazing, beautiful work!
@johnnyho90016 күн бұрын
Wonderful video!! I wish you(or any hammer man) would do a video/ series of power hammer tooling(how to make and use). I’ve been at the anvil for 40 years now doing door hardware. Joints are starting to show that and have started doing way more of the work using the power hammer and tooling. New way of thinking for me and would greatly appreciate help. Cheers, Jamie Tyree(US of A)
@1clinkerman16 күн бұрын
That red stain looks fantastic, great idea there!
@pjamestx16 күн бұрын
Great build.
@stevendelvecchio372116 күн бұрын
This was freaking incredible! Imagine making a Pulaski or a Rafter axe head
@newagelumberjack929216 күн бұрын
Lovely work mate
@pierees803816 күн бұрын
Really great video though I did miss your commentary through it. That axe turned out fantastic!
@valiantforge16 күн бұрын
Love your work, I'd like to see a racing axe from you
@livinthedreamNT16 күн бұрын
It seems a good 1912 one off axe to make is a Pulaski. The US forest service started using them in 1913. So a 1912 stamp on one would fit the timeline...
@dougpark102515 күн бұрын
Great job Tim
@robg8416 күн бұрын
Awesome work. Wish I knew how to do this.
@happyvapor467016 күн бұрын
Wow that thing looks great
@jdbergan16 күн бұрын
For sure keep going with the one of's. Need a sweet double bit axe next, maybe with a high carbon steel bit to get the differential hardened line. Not sure if you can get that with the train rail or not
@ajhearn453516 күн бұрын
Great job. Thank you 😊
@garychaiken80815 күн бұрын
So beautiful. ❤❤❤
@daviddrover-smith721715 күн бұрын
Well done
@elementjoe16 күн бұрын
Looks sweet to me.
@lancemillward191216 күн бұрын
14mins I had to wait thought you lost your voice lol awesome video tho loved watching it come together
@timmyreeves917014 күн бұрын
Tim fantastic as always. Have you ever made a double bit axe? That might be cool
@heathbanks575516 күн бұрын
Yes. All the projects you can think of.
@timhorton55515 күн бұрын
I know it’s not your cup of tea, but id like to see you make a 1912 sword :D
@itzikca16 күн бұрын
That's amazing! I never realized what kind of tooling was necessary to forge that. Have you considered making a pulaski?
@jameshaulenbeek593116 күн бұрын
very nice .... double bit next?
@memyselfandeye123416 күн бұрын
Cool 😎
@bfd156515 күн бұрын
You need larger power hammer
@UnknowableAbsolute16 күн бұрын
Really nice work Tim, did you ever consider leaving beards on it?
@MrAndrew140016 күн бұрын
Retired firefighter here and that is a beautiful axe! How many hours did that actually take from start to finish? I am sure that there is a lot of the process edited out of your video. Is it multiple days in the shop ?
@dmckenzie928116 күн бұрын
Honest question and I cant believe I have asked before, why do you grind off the pointy edges at the beginning before forge? Wouldn't you just pound that out on the hammer?
@geoffheith15 күн бұрын
thats unreal. where did u learn how to do this?
@timjk3216 күн бұрын
How about a Pulaski 👍
@rakersdownnz15 күн бұрын
1921 Carpenter's Hammer? Or hatchet? I've long been fascinated by the hatchet featured in Happy People: A Year in the Taiga. Here's a link to a scene of it in a lot of use: kzhead.info/sun/mcahgK2DZKF4qXk/bejne.htmlsi=-v5YSwhjqGjMvfcD&t=420 The flare, the hammer end, the flat blade. Thing I've never seen all brought together. But the things this man can do with the tool!
@AdrianMRyan16 күн бұрын
👍💪👍
@hulkthedane754216 күн бұрын
Tim are you ok?
@mateocardonab95215 күн бұрын
You probably answer this on different video but whats the significance of 1912. Are you following a blueprint of somekind?
@iamsick520416 күн бұрын
Made from 1912 train rail
@robsinclair100116 күн бұрын
train rail that is marked as made in 1912, all of his series of crafts are named after the vintage of the steel beam he uses.
@sinisterthoughts289616 күн бұрын
Very interesting and also relaxing video, thanks! 😄 One question though: Why are there no windows in your shop? Wouldn't a bit of natural light be nice while you work all day?
@katarn99916 күн бұрын
absolutely not. forging is done in dark shops so you can see if the metal is hot by the glow and can judge the temperature of the metal by the color and intensity. adding light to that would skew everything. it's an issue that comes up a lot when metal gets worked around windows of it being overheated because the metal must get much hotter to see the glow. so, the darkness is necessary for consistent metal working.
@sinisterthoughts289616 күн бұрын
@@sinisterthoughts2896 Ok - wasn't aware of this. Sounds tough for people working in a forge, but ok. Thanks for your feedback!
@katarn99916 күн бұрын
👍🪓
@Bringyourownhammer16 күн бұрын
i sure hope this aint a replica
@gabrielsturdevant970015 күн бұрын
first
@axonkilleur211816 күн бұрын
i was so close shucks XD
@doinkboi183816 күн бұрын
I like watching the one-offs being made. I'm not a fan of the no talking. At all !!
@garetkonigsfeld216 күн бұрын
What about titanium? 😅 it will be awesome to see this beast made out of titanium ❤
@princatko238916 күн бұрын
big chungas
@davepage587516 күн бұрын
actually, a little light for a fireman's axe.
@sinisterthoughts289616 күн бұрын
Nice piece of kit there Tim love the finish on the head and the grain on the handle looks immense , Tim what do you use to stain the Axe handle can you give me a few pointers my Gransfors Bruks handle looks nothing like that ,i really don't know what to use to get a good grain like your Axe handle ,maybe you could do a short tutorial on wood finishes .🪓
No back ground music is great Tim love hearing the natural sounds keep it up!
So calm, quiet and refreshing. Really enjoying the video so far
I enjoy every "bit" of that axe. You've had me anticipating for a week now with those teaser shorts.
That video was great. I loved the beginning oj just raw filming with minimal sound. Great build.
That axe turned out quite nice. If you make another you should give the buyer the option to have a curved or straight handle. Most firefighters I know that carry an axe opt for a straight handle since they tend to use the spike more often than the axe face.
Wow! As a firefighter both blue and red card certified, that's a really nice looking axe! Thank you for taking time to forge, film, edit and post this video.
That axe looks amazing and the handle is perfect! 👌 I love the way you've made the box, so you could use the box to display the axe when you aren't using it. Absolutely fantastic work and I hope she goes for a great price 😊👍👍👍👍👍
I love these videos where you let the tools do the talking. Great job.
Yes, I really like seeing the forging of a unique piece. Please keep going!... It's a beauty!
You’ve been killin it since I found this channel years back. This one was 👌👌❤️
You really out did yourself on this one Tim. Beautiful work and story telling, really enjoyed feeling like a fly on the wall to the creative process. Thanks for sharing with us.
I watch a lot of forging videos. Watching you draw out that pick is as good as it gets. Beautiful axe, excellent video, fine storytelling!
Rare tool build, great video, and the end product is beautiful. We shared this video on our homemade tools forum last week 😎
That is an awesome piece of merch, my man. Beautiful, stylish, practical yet brutish and Powerful. Your skills are really well developed, not only the smith side, but presentation is off the scale. Been watching since yonks back, but this is some master level work.
Beautiful work , mister.
Love the video. The pacing and presentation were awesome.
Awesome build Timothy. Keep it up 💪🦊👍
Awesome axe tim! 🇨🇦✊🏻
Top shelf, one of your best videos. Amazing outcome.
Really enjoyed this video. The axe is amazing, one of my favorite of all time I think.
A Pulaski of the same size would be great I enjoy your videos
One offs are cool. Would like to see more.😀
I second the Pulaski Idea. And then a crowbar too. Make it a set
I always enjoy watching you create these pieces Tim.
nailed it. loved the extended intro
I worked in my dad's metal plating shop and we had an axe come in from the local fire department for a nickel coating as a retirement gift. Being a Maine I asked to do the plating. The axe looked just like that one, and now I wonder if it was. Nice work!
😮. Timmothy beautiful job. Keep up the great craftsmanship and hard work my friend. Forge on. God bless.
What a piece of art, Tim
I really miss cutting with a torch... it was always a ton of fun!
I like it better with the rough and raw forge texture.. with only the blade ground.. It just looks great.. When you grind everything, it just makes it look manufactured and kinda takes away that "Forged" look that I love so much.
Looks hella awesome Tim!!👍
Great video Tim , amazing job you did there , your workmanship and attention to detail is outstanding . Love to have a go making an axe one day . Here in New Zealand there are Kelly axes that have made in Canada on them -good axes . All the best maté from one Tim to another 👍
Absolutely fascinating to watch Tim!
Thanks for sending me the reminder email about your latest creation. Well worth watching you create something so beautiful.
Great stuff as always, Mr Dyck. I always enjoy watching you in action.
Love the one offs great video.
Amazing as always!
Love it! I'd love to see you do a small 1912 ball-pein hammer with what you've got left. I love the bigger tools...but I use my small tools more than anything these days. Keep up the awesome work! (loving my 2 pound cross-pein hammer BTW)
Great video Tim!! Loved it. Keep the forge lit!
That axe is amazing, beautiful work!
Wonderful video!! I wish you(or any hammer man) would do a video/ series of power hammer tooling(how to make and use). I’ve been at the anvil for 40 years now doing door hardware. Joints are starting to show that and have started doing way more of the work using the power hammer and tooling. New way of thinking for me and would greatly appreciate help. Cheers, Jamie Tyree(US of A)
That red stain looks fantastic, great idea there!
Great build.
This was freaking incredible! Imagine making a Pulaski or a Rafter axe head
Lovely work mate
Really great video though I did miss your commentary through it. That axe turned out fantastic!
Love your work, I'd like to see a racing axe from you
It seems a good 1912 one off axe to make is a Pulaski. The US forest service started using them in 1913. So a 1912 stamp on one would fit the timeline...
Great job Tim
Awesome work. Wish I knew how to do this.
Wow that thing looks great
For sure keep going with the one of's. Need a sweet double bit axe next, maybe with a high carbon steel bit to get the differential hardened line. Not sure if you can get that with the train rail or not
Great job. Thank you 😊
So beautiful. ❤❤❤
Well done
Looks sweet to me.
14mins I had to wait thought you lost your voice lol awesome video tho loved watching it come together
Tim fantastic as always. Have you ever made a double bit axe? That might be cool
Yes. All the projects you can think of.
I know it’s not your cup of tea, but id like to see you make a 1912 sword :D
That's amazing! I never realized what kind of tooling was necessary to forge that. Have you considered making a pulaski?
very nice .... double bit next?
Cool 😎
You need larger power hammer
Really nice work Tim, did you ever consider leaving beards on it?
Retired firefighter here and that is a beautiful axe! How many hours did that actually take from start to finish? I am sure that there is a lot of the process edited out of your video. Is it multiple days in the shop ?
Honest question and I cant believe I have asked before, why do you grind off the pointy edges at the beginning before forge? Wouldn't you just pound that out on the hammer?
thats unreal. where did u learn how to do this?
How about a Pulaski 👍
1921 Carpenter's Hammer? Or hatchet? I've long been fascinated by the hatchet featured in Happy People: A Year in the Taiga. Here's a link to a scene of it in a lot of use: kzhead.info/sun/mcahgK2DZKF4qXk/bejne.htmlsi=-v5YSwhjqGjMvfcD&t=420 The flare, the hammer end, the flat blade. Thing I've never seen all brought together. But the things this man can do with the tool!
👍💪👍
Tim are you ok?
You probably answer this on different video but whats the significance of 1912. Are you following a blueprint of somekind?
Made from 1912 train rail
train rail that is marked as made in 1912, all of his series of crafts are named after the vintage of the steel beam he uses.
Very interesting and also relaxing video, thanks! 😄 One question though: Why are there no windows in your shop? Wouldn't a bit of natural light be nice while you work all day?
absolutely not. forging is done in dark shops so you can see if the metal is hot by the glow and can judge the temperature of the metal by the color and intensity. adding light to that would skew everything. it's an issue that comes up a lot when metal gets worked around windows of it being overheated because the metal must get much hotter to see the glow. so, the darkness is necessary for consistent metal working.
@@sinisterthoughts2896 Ok - wasn't aware of this. Sounds tough for people working in a forge, but ok. Thanks for your feedback!
👍🪓
i sure hope this aint a replica
first
i was so close shucks XD
I like watching the one-offs being made. I'm not a fan of the no talking. At all !!
What about titanium? 😅 it will be awesome to see this beast made out of titanium ❤
big chungas
actually, a little light for a fireman's axe.
Nice piece of kit there Tim love the finish on the head and the grain on the handle looks immense , Tim what do you use to stain the Axe handle can you give me a few pointers my Gransfors Bruks handle looks nothing like that ,i really don't know what to use to get a good grain like your Axe handle ,maybe you could do a short tutorial on wood finishes .🪓