CAT 637 Apron Trouble…

2022 ж. 5 Жел.
277 208 Рет қаралды

Пікірлер
  • Dude! When I got back from Vietnam I worked as a welder's assistant at a rock quarry and did the "step and fetch" stuff like a welder needs. If memory serves correctly, we were not allowed to work on anything that did NOT have at least two inches of frozen mud on it! LOL Conditions were absolutely awful much of the time. The day you welded, was a day in our dreams! LOL Well done, and thanks for sharing.

    @PacoOtis@PacoOtis Жыл бұрын
  • *On Fire Welding* Bravo well done, thank-you sir for taking the time to bring us along. GOD Bless.

    @MrRebar15@MrRebar15 Жыл бұрын
  • Have you ever tried LA-90 or LA-100 Lincoln wire for some of those repairs on heavy equipment? I've had really good results with it when dealing with those high strength steels that most equipment is made from. It is a little bit more trouble because a preheat is almost always necessary but when you are dealing with alloys like T-1 and AR-516 you get a much stronger weld. Good job getting getting that yellow beast back in the field and doing something productive! Folks like you are becoming a rare breed nowadays, not enough young people are learning how to do heavy repairs in the field anymore..... Even though I'm around this type stuff all the time I still enjoy watching others out there getting it done and I have learned a few tricks along the way! Really enjoy your videos, keep that hood down, and the sparks flying!👍

    @darinwilson8663@darinwilson8663 Жыл бұрын
  • I'm waiting for the guy that commented on my dump truck door repair video to comment here lol......nice repair. I know you've said it alot but this is the perfect example of needing to get the job done quick and efficient enough to get the customer back up quickly. Nice work as always 👍

    @mcfwelding@mcfwelding Жыл бұрын
  • Нормальный ты пацан. Приятно смотреть на грамотно работающего человека. Привет и удачи тебе из России. Г. Красногорск. Мос обл.

    @dimfil1460@dimfil1460 Жыл бұрын
  • Saw your comment on another welding channel. It's pretty awesome to see your constructive thoughts. You really know now to build this community up! I learn something every time I see one of your videos. With much appreciation for your hard work sharing your amazing skills.

    @Waiakalulu1@Waiakalulu1 Жыл бұрын
    • Thank you!!!

      @OFW@OFW Жыл бұрын
    • While you are watching this video, your government is supporting terrorists in Ukraine for your money

      @Odessa-2maya-2014@Odessa-2maya-2014 Жыл бұрын
  • Great repair done in short time. Wall thickness looks too thin on original. Thanks for sharing.

    @bostedtap8399@bostedtap8399 Жыл бұрын
  • Nice work Greg. Making it seem quick and easy as always.

    @thomas4844@thomas4844 Жыл бұрын
  • Thanks for taking the time to make a video even when you have a short time to get the job done. Good stuff!

    @timjones2404@timjones2404 Жыл бұрын
  • Amazing work,fascinating watching all on site repairs & engineering.. 🤘🤘🤘

    @ronpatterson5483@ronpatterson5483 Жыл бұрын
  • Always plenty of variety on your channel thanks for sharing

    @kerrygleeson4409@kerrygleeson4409 Жыл бұрын
  • great to see more On Fire Welding, cheers from Florida, Paul

    @ypaulbrown@ypaulbrown Жыл бұрын
  • Gittin on it bright and early as always; really enjoyed your work on that conveyor system. Particularly appreciate your descriptions of the related machinery. What fireproofing pomade do you apply to your beard ? I fear a “Billy Gibbons meets Richard Pryor” event !

    @jamesriordan3494@jamesriordan3494 Жыл бұрын
  • Very interesting repair that. Would like to see the next one done like you recommend. Top stuff young man.

    @JonDingle@JonDingle Жыл бұрын
  • Nice repair given the time restraint. Also love the 220v plug on the back your truck that’s pretty slick. By the way I appreciate you stopping by on my channel and giving a comment.

    @EEJester1586@EEJester1586 Жыл бұрын
    • Thank you! I try to be supportive in the welding community.

      @OFW@OFW Жыл бұрын
  • Nice demonstration as always.Thanks

    @micmike@micmike Жыл бұрын
  • Awesome video as usual👏👏👏 I’ve never understood why Cat insist on putting the apron pivots on the inside of the bowl, operating in all the dirt etc? I’ve several thousand hours on a Terex TS24 where the pivots are on the outside of the bowl & never give an ounce of problems🧐🤔

    @peterwalley2355@peterwalley2355 Жыл бұрын
    • Engineered obsolescence?

      @TinMan0555@TinMan05553 ай бұрын
  • great V notch and cleanup before the repair.. thumbs up 👍👍

    @shawnmrfixitlee6478@shawnmrfixitlee6478 Жыл бұрын
  • Excellent work mattey! IC and Kurtis would be proud too.

    @danielpullum1907@danielpullum1907 Жыл бұрын
  • Thank you for your videos!!

    @jaymarshall7632@jaymarshall7632 Жыл бұрын
  • Thank you for sharing,i learn a lot 👍👍👍👍another great job

    @carloskawasaki656@carloskawasaki6569 ай бұрын
  • Love your service truck 👍👍

    @heavymachinery2843@heavymachinery2843 Жыл бұрын
  • Very instructive. Thank you!

    @BruceBoschek@BruceBoschek Жыл бұрын
  • Always enjoy your videos and time.

    @37903eral@37903eral Жыл бұрын
  • Nicely done.🫡

    @TinMan0555@TinMan05553 ай бұрын
  • gotta love big companies putting bandaid fixes on a major surgery patient. Good money for talented trade people like yourself young fella

    @jareds5058@jareds5058 Жыл бұрын
  • Great video thank you for sharing God bless.

    @Asomesauc@Asomesauc Жыл бұрын
  • The KZhead algorithm recommended this channel. I am glad it did.

    @joselucca2728@joselucca2728 Жыл бұрын
  • You might want to try heating up the bent area before you start pounding on it. There are times heating it up then quick-quenching it with water will straighten it up pretty good.

    @bill8by5@bill8by5 Жыл бұрын
  • Very interesting thanks for sharing from uk

    @guygfm4243@guygfm4243 Жыл бұрын
  • Your work awesome. I guess what really gets me is lining everything up. So much unseen work there! lol

    @oldmetalguy4577@oldmetalguy4577 Жыл бұрын
    • You are very right. There is a lot of unseen work in my videos.

      @OFW@OFW Жыл бұрын
  • Cool thanks for sharing your work! 👍

    @chrisj2848@chrisj2848 Жыл бұрын
  • Awesome repair work. They certainly keep you busy.

    @VenturiLife@VenturiLife Жыл бұрын
  • I just found your channel. I really enjoy watching you skilled workers doing your stuff. Plus, I get to learn some of your tricks. Don't worry. I am a retired A&P Mech. Keep up the good work and stay safe.

    @domthomas1002@domthomas1002 Жыл бұрын
  • Thank God for Milwaukee tools great video of great skill Take man

    @irishlad8797@irishlad8797 Жыл бұрын
  • Хороший мастер вы

    @user-sp8mj2ij4d@user-sp8mj2ij4d Жыл бұрын
  • Nice fix. Still surprised how thin that wall really is

    @chosen1one930@chosen1one930 Жыл бұрын
  • Man you get all the fun stuff to work on LOL.

    @Brainmalfuction@Brainmalfuction Жыл бұрын
  • Top job young fella well done

    @saratammaro3505@saratammaro3505 Жыл бұрын
  • Been there. Opperators shoving the crowd foward on a load with apron closed. Good way to get ass time in the crew shack.

    @nadineraynor2539@nadineraynor25399 ай бұрын
  • This is educational. I never drove a Cat. I drove a TX14b. Terex are designed quite different.

    @MaxNafeHorsemanship@MaxNafeHorsemanship Жыл бұрын
  • Nice job! Is there really enough space to get in one reinforcement plate per side? Looks like the customer tries to grade the desert... 😂 Thx for showing! 👍👍👍

    @horstszibulski19@horstszibulski19 Жыл бұрын
  • heavy equipment repairs are my fav!👍👍

    @vinnyhern@vinnyhern Жыл бұрын
  • As a former general repair welder who now solely does vehicle bodywork welding, I miss getting to weld on stuff that isn't tinfoil.. Now its all tiny tacks at the lowest setting on the smallest welding machine, where it used be burning heavy rods into heavy steel using a big diesel plant. It seemed like a tough gig at the time - in hindsight it was great fun and a complete doddle by comparison. Enjoy what you do. :-)

    @jamesward5721@jamesward5721 Жыл бұрын
  • Awesome , great content .

    @DaleDirt@DaleDirt Жыл бұрын
  • 🤙🏽🤙🏽🤙🏽 thanks for the info on settings and wire much appreciated

    @mikel9666@mikel9666 Жыл бұрын
  • I love welding. there is something about attaching metal together with an ARC that gets my brain in a happy zone .😁

    @lar4305@lar4305 Жыл бұрын
  • Nice work.

    @anonymouscoward7559@anonymouscoward7559 Жыл бұрын
  • Tradesmen are what make this country work truly. I think you make this look deceivingly easy :) Cheers from gulf area. I hope you wear sunscreen or get a big hat with cloth flap for the neck. "The grinder and paint make me the welder I ain't" - AvE

    @hyd119@hyd119 Жыл бұрын
  • Awesome job

    @cntslesfabrication@cntslesfabrication Жыл бұрын
  • Hey very informative do a good job I like the way you describe stuff which is important question for you I am doing a welding project and make an attachment for my skid steer to rip concrete driveways out what wire would you use for welding A36 that is .5“ thick getting welded to the back of a pallet fork and a piece of plate getting welded between the two forks, I’m not sure what type of steel forks are made out of but they’re pallet forks any information would be awesome thank you so much keep up the good work

    @steveanderson4768@steveanderson4768 Жыл бұрын
    • Sounds like you should do a little pre heat with a higher tensile wire such as 7018 -8018 or an 70-80 series flux wire

      @OFW@OFW Жыл бұрын
  • Good job! AND,.....I have a question: I bought a new Hobart IronMan 240 and being a newbie mig welder ( been a stick for 40 yrs) and it came with 5/8" nozzle. They sale 1/2" nozzle so, does 1/2" nozzle's work better for fence repair's on outside welding or is it for tighter welding for inside welding? I always wonted a mig welder and after watching your video's, I just figured it was time to buy one for the barn. Lol. :)

    @cwbean3087@cwbean3087 Жыл бұрын
    • There isn’t much difference. The 1/2 should be able to get into a tighter spot. I use a 5/8

      @OFW@OFW Жыл бұрын
    • Thanks

      @cwbean3087@cwbean3087 Жыл бұрын
  • 25👍's up on fire welding thank you for sharing

    @scotthultin7769@scotthultin7769 Жыл бұрын
  • Good work, it will serve...

    @SLK638@SLK638 Жыл бұрын
  • I'm surprised that flange you unbolted at the start wasn't swimming in red loctite and pressed in 0.010" tight too.

    @jimsvideos7201@jimsvideos7201 Жыл бұрын
    • It needs to come out easy. I have only seen anti -seize on them.

      @OFW@OFW Жыл бұрын
  • No. You heard that right Miller welders have a partnership with ACDC

    @trippinballs101@trippinballs101 Жыл бұрын
  • With your mig setup, do you just plug into your 240 plug on your engine driven? I see a lot of guys going with the remote set up but I’m just thinking about using something like a multimatic 211. Wondering what the best route is. Also we need a service truck tour! Nice work and nice truck!!!

    @alexjohnson2997@alexjohnson2997 Жыл бұрын
    • Ya I use the power from my Miller 600. I believe all you need is 240v and 10,000kw to run the 211. Most machines produce that.

      @OFW@OFW Жыл бұрын
    • @@OFW TEN THOUSAND KILOWATTS? Means, ten MEGAWATTS? Wow, it's really impressive stuf fyou got there, mate... ;-) (Yes, I know - you meant 10 kW, or 10,000 W : )

      @MrKotBonifacy@MrKotBonifacy Жыл бұрын
  • thanks Greg

    @jeffo881@jeffo881 Жыл бұрын
  • What is different the flux core wire(Black) and carbon steal wire? Most of company using the flux core wire because it is cheaper. I don't like it, it is so difficult to make the overhead and vertical welding. not much experience myself the customer doesn't like my final welding surface. I am comfortable using the carbon steal wire much better but sometime has crack inside. What about your experience for carbon steal wire welding?

    @eungje7123@eungje7123 Жыл бұрын
    • Both are carbon steel. The one I use is dual shield which is more expensive than regular wire. But I typically don’t have any issues with regular wire. If I had pictures or a little more information I could try to help you.

      @OFW@OFW Жыл бұрын
  • Just wondering why you never preheat?ic weld and cutting edge engineering Australia always do to take the stress out.great work by the way

    @jamessbryne@jamessbryne Жыл бұрын
    • I do preheat thicker stuff. The thinner material doesn’t need to me preheated.

      @OFW@OFW Жыл бұрын
  • bravo cool

    @marcellebaudry5786@marcellebaudry5786 Жыл бұрын
  • Awesome

    @Jmnp08@Jmnp0811 ай бұрын
  • I kind of miss site work, but splitting tractors and doing steer clutches on dozers inside while the heater lets me work in a tee shirt makes me miss it less, lol.

    @genefogarty5395@genefogarty5395 Жыл бұрын
  • I always get a kick reading KZhead comments from people who have no idea what field repair is like. Most of the time it’s make it as best you can and get it back to work

    @MeltinMetalAnthony@MeltinMetalAnthony Жыл бұрын
    • Ya, all of those people have probably never welded in their life or they work in a nice shop! They also don’t understand that machine makes several thousand a day while its running.

      @OFW@OFW Жыл бұрын
  • God bless a needle scaler I would be lost now without one

    @tomking5822@tomking5822 Жыл бұрын
  • @7:33 bravo you made more surface cracks

    @yyabay@yyabay Жыл бұрын
  • Cool fix

    @lpaulson1964@lpaulson19648 ай бұрын
  • Have u ever tried using the gas less mig welder with the flux in the weld wire If so what did u think cheers from seamus in Ireland 😎

    @irishlad8797@irishlad8797 Жыл бұрын
    • I have. I use it sometimes.

      @OFW@OFW Жыл бұрын
    • @@OFW l find it hard to use the flux wire but I probably havn't practised enough Keep the videos coming 😎

      @irishlad8797@irishlad8797 Жыл бұрын
  • I would assume you would used dualshield flux core since that joint would take a lot of stress but er70s-6 was used. Any insight to that?

    @MLDIYSH@MLDIYSH2 ай бұрын
    • 70s6 is used for a lot of high stress welds. Almost all trailer manufacturers use it, the frame in your truck is welded with it. I like using it for thinner materials and dual shield for thicker material.

      @OFW@OFW2 ай бұрын
  • Have to question vertical down,has been proven not as strong as vert up

    @totalpkg6912@totalpkg6912 Жыл бұрын
    • If you prep it and you know what you are doing it’s just fine.

      @OFW@OFW Жыл бұрын
  • Like that you talk about your set up.

    @kimknowles3681@kimknowles36812 ай бұрын
  • I'm truly surprised how on a heavy duty machine like that thet these fittings are welded to such thin metal. No wonder it pulled out...

    @kraz904@kraz904 Жыл бұрын
    • I thought exactly the same. It's a shame

      @luukdeboer1974@luukdeboer1974 Жыл бұрын
  • Excellent repair with the added plate. Seems obvious, Huh?

    @billrey8221@billrey8221 Жыл бұрын
  • you make welding look easy

    @kahlzun@kahlzun Жыл бұрын
  • That sledgehammer would have been my choice too!

    @johnkelly6942@johnkelly6942 Жыл бұрын
  • What generator powers that Millermatic? Does it need clean power (inverter generator) ?

    @BCole-bj4lv@BCole-bj4lv Жыл бұрын
    • A Miller big blue 600 air pak is the power source. I would say it needs to be pretty clean to run properly.

      @OFW@OFW Жыл бұрын
  • curious why you use mig in most of the videos instead of stick?

    @philmonachan8007@philmonachan8007 Жыл бұрын
    • Mostly because it’s faster.

      @OFW@OFW Жыл бұрын
  • What form swinging that sledgehammer...

    @ET-ld6ju@ET-ld6ju4 ай бұрын
  • No time to do right the first time but plenty of time to do it twice

    @brucesmith5501@brucesmith5501 Жыл бұрын
  • Well done job! Look like the structural material too thin, right?

    @dhstube@dhstube Жыл бұрын
    • Ya it’s getting there.

      @OFW@OFW Жыл бұрын
  • now thats a mans vise. Love it!

    @King_TuTT@King_TuTT Жыл бұрын
  • ehrliche arbeit

    @wintermutevsneuromancer8299@wintermutevsneuromancer829910 ай бұрын
  • Blue collar geniuses

    @HanginInSF@HanginInSF Жыл бұрын
  • 👌👌🤘🤘🤘🤘

    @yenerm114@yenerm114 Жыл бұрын
  • Nice!!!!!!

    @sighpocket5@sighpocket5 Жыл бұрын
  • doing all vertical down welds doesnt have the penetration as a vertical up

    @mannyarchibald5752@mannyarchibald5752 Жыл бұрын
    • That’s correct, but in this situation with the fit up downhill is just as good.

      @OFW@OFW Жыл бұрын
  • Gotta be an annoying job. Gotta be smart enough to come up with a fix on the spot to fix others fuck ups. Especially with time constraints and working out doors

    @JB-no1hy@JB-no1hy Жыл бұрын
  • Хорошая работа!Лайк!

    @amid1966@amid1966 Жыл бұрын
  • Why not stick weld just curious??

    @Runndeep@Runndeep Жыл бұрын
    • Takes too long.

      @OFW@OFW Жыл бұрын
    • @@OFW yeah it does, nice work bro

      @Runndeep@Runndeep Жыл бұрын
  • Are you in the Central Valley

    @jeremyhughes2693@jeremyhughes2693 Жыл бұрын
    • Yes.

      @OFW@OFW Жыл бұрын
  • Not much heat on weldings.

    @asdasd-jl3ls@asdasd-jl3ls Жыл бұрын
  • Технологическая недоработка инженеров Катерпиллера. Надо было эту чашу с внутренней стороны (донце чаши) делать большего диаметра. Усиливать металл в месте установки этого узла. Technological flaw of Caterpillar engineers. It was necessary to make this bowl from the inside (the bottom of the bowl) of a larger diameter. Strengthen the metal at the installation site of this node (a thicker sheet).

    @rinadych@rinadych Жыл бұрын
  • The owner didn’t give you enough time to do the job correctly & when it doesn’t last, he’ll complain. Maybe next time, he’ll not be in such a hurry & you can do it the way you know it needs to be done.

    @dirtfarmer7472@dirtfarmer7472 Жыл бұрын
    • Haha, customers whom run scrapers only care about “now”, get it in the dirt again as fast as possible

      @offroadrepairman@offroadrepairman Жыл бұрын
    • When it breaks again it’ll be the welders fault no matter what.

      @daleolson3506@daleolson3506 Жыл бұрын
    • the machine is in the dirt doing its job asap, customers happy, it breaks again it gets fixed again but with tight windows and schedules theres not much time to ne waiting around

      @Seabass1206@Seabass1206 Жыл бұрын
    • While you are watching this video, your government is supporting terrorists in Ukraine for your money

      @Odessa-2maya-2014@Odessa-2maya-2014 Жыл бұрын
    • @@Odessa-2maya-2014 not much we can do about anything the government decides to do. 🤷‍♂️

      @offroadrepairman@offroadrepairman Жыл бұрын
  • 😊

    @timspicer3270@timspicer3270 Жыл бұрын
  • Do none of these companies do preventative maintenance? I mean it keeps you busy but some of these jobs look like they have been neglected for quite a while

    @pauliepatches@pauliepatches Жыл бұрын
  • Not saying it's wrong, just surprised you short circuit a lot of your field repairs. Still get a like for good work.

    @scooterinvegas1@scooterinvegas1 Жыл бұрын
  • 👌👍

    @rudyrivera7426@rudyrivera7426 Жыл бұрын
  • Wire is quicker than 7018 but is it stronger ?

    @garyteague4480@garyteague4480 Жыл бұрын
    • It can be just as strong or stronger depending on the wire.

      @OFW@OFW Жыл бұрын
  • No señor primero tienes que sujetar la pieza en la parte interior haciendo un agujero en el centro y soldarlo después solidarias lo de la parte de fuera

    @fitoperez6@fitoperez6 Жыл бұрын
  • Burning more wire , good job of repair

    @terryperrott8567@terryperrott8567 Жыл бұрын
KZhead