KZhead
Тәжірибелік нұсқаулар және стиль

How To Make A Manual Winch | Homemade Powerful Manual Winch | DIY Winch

Diamleon Diy Builds
2024 ж. 3 Нау.
608 883 Рет қаралды
Жүктеу

How To Make A Manual Winch | Homemade Powerful Manual Winch | DIY Winch
Hello Everyone!
Today I show you how to make a manual winch. This homemade winch is a manual operated winch. This diy winch is very powerful. This diy manual winch is very simple to make at home. This diy winch lift is very cheap to make. I used scrap metals to make this diy winch. This homemade manual winch is very small and compact in size. Also this diy winch is less weight so this homemade winch can be very easily portable from one place to another place without any effort. This homemade winch machine is used to lift heavy weight. This homemade manual winch can also be used for heavy duty applications. I used sprockets and chain to increase the torque for this diy winch. I made a ratchet mechanism for this homemade winch. This diy ratchet mechanism is fixed to this homemade manual winch. This diy homemade winch machine may looks simple but it really performs very well. I personally enjoyed myself while making this diy winch build. This homemade manual winch really works good. I hope you guys will enjoy this making of diy homemade manual winch machine build
Click here to SUBSCRIBE Diamleon Diy Builds:
kzhead.info
Support me on PATREON:
www.patreon.com/diamleondiybuilds
Social Media:
Facebook: facebook.com/diamleondiybuilds
Instagram: instagram.com/diamleondiybuilds
Twitter: twitter.com/diamleondiy
Contact Mail Id:
diamleondiybuilds@gmail.com
Thanks for watching
Hit LIKE & SUBSCRIBE button
#diamleondiybuilds
#homemadetools
#diytoolshomemade

Пікірлер

  • Very nice design, Good leverage with speed reduction. I've modified a winch that I bought and added a hex nut. The put a socket on a cordless drill and quickly reel in the cable after use.

    @davelynn4993@davelynn4993Ай бұрын

    • Thank you very much

      @DiamleonDiyBuilds@DiamleonDiyBuildsАй бұрын

  • Такие ролики приходится смотреть по два раза, если он заинтересовал тебя, первый раз начало и конец, чтобы понять насколько интересен для тебя результат работы, а дальше пересматривать если интересен. здесь можно сделать пару усовершенствований, первое. сделать съемную рукоять, и на валу большой звездочки сделать второе крепление рукояти, -- если груз легкий то можно крутить и вал большой звездочки, у меня магазинная лебедка, и рычаг привода не намного длиннее чем рукоять с видео, а лебедка без дополнительной звездочки поднимает более 1000 кг. А так идея хорошая.

    @user-bk1ft2be9u@user-bk1ft2be9u2 ай бұрын

    • Great job. but long video 🎉

      @medianmuhnna7249@medianmuhnna7249Ай бұрын

    • Thanks man❤

      @DiamleonDiyBuilds@DiamleonDiyBuildsАй бұрын

  • Quando for trocar o rolamento do lado da coroa vai ter que desmanchar tudo que fez.

    @magnoeuripedeslourencodias3025@magnoeuripedeslourencodias302520 күн бұрын

  • very practical and useful. Maybe you can do a second one with a small electric motor- detachable ? thank you

    @asressaraia2340@asressaraia234020 күн бұрын

    • Thank you very much bro❤

      @DiamleonDiyBuilds@DiamleonDiyBuilds14 күн бұрын

  • a idéia é muito boa valeu obrigado Deus te abençoe sempre você e sua família

    @dimasdasilvamiranda4976@dimasdasilvamiranda49762 ай бұрын

    • Tamil 18:27

      @yogabala7443@yogabala7443Ай бұрын

    • What bro

      @DiamleonDiyBuilds@DiamleonDiyBuildsАй бұрын

  • Very nice

    @ArifulIslam-pz1ei@ArifulIslam-pz1ei15 күн бұрын

    • Thank you very much dear

      @DiamleonDiyBuilds@DiamleonDiyBuilds14 күн бұрын

  • فنان رهيب عاشت ايدك

    @user-sh4cl8pj9f@user-sh4cl8pj9fАй бұрын

  • I have followed dozens of your creative videos with all the complete extraordinary work facilities, we really like it, thank you for your knowledge, it has inspired many people

    @wahidtrafo6009@wahidtrafo60092 ай бұрын

    • Thank you very much bro❤

      @DiamleonDiyBuilds@DiamleonDiyBuilds2 ай бұрын

  • I am following you from the country of Morocco. I have a request if you could show us how to make a feed crushing machine. I do not mean grinding it, but to make the size of the feed smaller and thicker so that chickens and chicks can swallow it easily.

    @Xmen-tk9px@Xmen-tk9px2 ай бұрын

  • It wad interesting,✋🇰🇿

    @user-qt4tf6xh2g@user-qt4tf6xh2g4 күн бұрын

  • Creative video, thanks :)

    @Bianchi77@Bianchi77Ай бұрын

    • Thank you very much dear

      @DiamleonDiyBuilds@DiamleonDiyBuildsАй бұрын

  • I like lock nuts also, good to see a job done right

    @jimgree@jimgree2 ай бұрын

    • Thank you very much bro❤

      @DiamleonDiyBuilds@DiamleonDiyBuilds2 ай бұрын

  • Можно вечно смотреть на три вещи - как течёт вода, как горит огонь и как работают другие!

    @user-vt2ml4du3g@user-vt2ml4du3g2 ай бұрын

  • Можно вечно смотреть; На огонь.... На воду... И каким образом работают другие люди!!!

    @user-mx3sl4bp8i@user-mx3sl4bp8i2 ай бұрын

  • Parabéns pelo vídeo, muito importante.

    @joaorosadecarvalho6000@joaorosadecarvalho60002 ай бұрын

    • Thank you❤

      @DiamleonDiyBuilds@DiamleonDiyBuildsАй бұрын

  • Excelente, vou salvar esse vídeo.

    @JoseCarlos-ip5rc@JoseCarlos-ip5rc2 ай бұрын

    • Thank you very much dear

      @DiamleonDiyBuilds@DiamleonDiyBuilds2 ай бұрын

  • Good job 👍

    @mrdash1735@mrdash17352 ай бұрын

    • Thank you very much dear

      @DiamleonDiyBuilds@DiamleonDiyBuildsАй бұрын

  • Hello mister beautiful idea good job well done

    @vinceianni4026@vinceianni40262 ай бұрын

    • Thank you very much dear

      @DiamleonDiyBuilds@DiamleonDiyBuilds2 ай бұрын

  • Super, strong!

    @josejohn3006@josejohn3006Ай бұрын

    • Thanks man❤

      @DiamleonDiyBuilds@DiamleonDiyBuildsАй бұрын

  • Sangat kreatif dan sangat menginspirasi, terimakasih sudah berbagi

    @idecreativ87@idecreativ872 ай бұрын

    • Thank you very much dear

      @DiamleonDiyBuilds@DiamleonDiyBuilds2 ай бұрын

  • Nice job

    @leepatton1180@leepatton11802 ай бұрын

    • Thanks man❤

      @DiamleonDiyBuilds@DiamleonDiyBuilds2 ай бұрын

  • excelente

    @jairomota5825@jairomota58252 ай бұрын

    • Thank you very much dear

      @DiamleonDiyBuilds@DiamleonDiyBuilds2 ай бұрын

  • Muito bom mesmo.

    @Sandorvalsiepiereki@Sandorvalsiepiereki2 ай бұрын

    • Thank you very much bro

      @DiamleonDiyBuilds@DiamleonDiyBuilds2 ай бұрын

  • nice work what type and brand of cutting wheel are you using on the hand grinder?

    @kjmonosr@kjmonosrАй бұрын

    • Thanks man❤. I use yuri brand cutting wheels

      @DiamleonDiyBuilds@DiamleonDiyBuilds27 күн бұрын

  • Instead of the cable clamps drill and tap the shaft for a set screw, like real winches. And the shaft and bearings on the primary side could be reduced in size to decrease cost.

    @404nouserinformationfound@404nouserinformationfoundАй бұрын

  • Y cuando le quita el seguro como hace para que la carga no se caiga ?

    @hmarvin3791@hmarvin3791Ай бұрын

  • I must say that I prefer some preamble on a project like this. A brief description of what you are doing and what materials, sizes etc involved. I also prefer to have a project which bolts together than one which is fully welded, it makes for much easier changes to design or parts replacement, but having said that, welded construction is quicker (but dirtier), so perhaps there is a place for it. The fastening of your winch rope is very rough, a wedge and becket would be much better and neater also, even a couple of grub screws would have been better IMHO. Also your rope clamps looked to be installed incorrectly. The U bolt should always go over the rope end which is not loaded, and the loaded end should be fitted to the saddle of the rope clamp. It is good practice to have at least 3 turns left on the drum before any load is applied, better still around 5 turns, so the rope won't pull out of its anchorage as you take up the load. I know that you had more turns on in your demonstration but some of your followers may not be aware of this issue.

    @Ropetangler@RopetanglerАй бұрын

  • Un cable talves más grueso o un cabo de buena calidad pero igual esta excelente

    @victoraviles5002@victoraviles50022 ай бұрын

    • Thanks man

      @DiamleonDiyBuilds@DiamleonDiyBuilds2 ай бұрын

  • Very Good work.The only problem when lowering the load.You can not lower the load halfway.Otherwise load will drop with high speed. so it is danger,I think.

    @recepgumus21@recepgumus212 ай бұрын

    • Thank you very much bro

      @DiamleonDiyBuilds@DiamleonDiyBuilds2 ай бұрын

  • Great winch man awesome!!!

    @HariHaran-nk7ji@HariHaran-nk7ji2 ай бұрын

    • Thanks dude ❤

      @DiamleonDiyBuilds@DiamleonDiyBuilds2 ай бұрын

  • Because you let the welding current pass through the ball race bearings you now need to fit four new ball races :(

    @johnbower@johnbowerАй бұрын

  • Paraben muito bom

    @joaobatistasevero8205@joaobatistasevero82052 ай бұрын

    • Thank you dear ❤

      @DiamleonDiyBuilds@DiamleonDiyBuilds2 ай бұрын

  • Everyone praises this project, but no one thinks about the danger it presents with great weight.

    @tuskaghe@tuskaghe2 ай бұрын

  • I think ya needed a little more weld on that one part. 😂

    @TheGoatShowMan@TheGoatShowMan2 ай бұрын

    • Which part

      @DiamleonDiyBuilds@DiamleonDiyBuilds2 ай бұрын

  • i would use gears instead of the chain, to prevent failure

    @ieatYTP59@ieatYTP59Ай бұрын

    • Thanks for your suggestion bro❤

      @DiamleonDiyBuilds@DiamleonDiyBuildsАй бұрын

  • No lo veo seguro por lo menos 2 o 3 transmiciones lo faltan cuanto mas lento mas seguro porque ai lo sueltas te chanca los huesos de la mano

    @dianatuanama1276@dianatuanama12762 ай бұрын

  • After lifting a heavy weight , how would you control and down that weight?

    @alatt9232@alatt92322 ай бұрын

    • I used sprockets and long rotating handle to control heavy weight

      @DiamleonDiyBuilds@DiamleonDiyBuilds2 ай бұрын

  • 💪👍👍👍👍

    @karimmouhend5899@karimmouhend5899Ай бұрын

    • Thank you very much dear

      @DiamleonDiyBuilds@DiamleonDiyBuildsАй бұрын

  • Supar sir

    @nazirshaikh5620@nazirshaikh56202 ай бұрын

    • Ok sir thank you❤

      @DiamleonDiyBuilds@DiamleonDiyBuilds2 ай бұрын

  • See dont weld near berings u melt the greese inside

    @Mwalaevans@Mwalaevans11 күн бұрын

  • Price?

    @rimisyih9051@rimisyih90512 күн бұрын

  • Cái này kéo đồ nặng mà muốn nhả ra thì toang hết. Phải thiết kế chiều hãm nhả khi kéo nặng

    @nguyentudat8202@nguyentudat82022 ай бұрын

  • Mais uma cagada,o eixo menor ficou todo soldado,trocar rolamento ja era.

    @magnoeuripedeslourencodias3025@magnoeuripedeslourencodias302520 күн бұрын

  • Xin giá

    @user-wh2ug7le8j@user-wh2ug7le8jАй бұрын

  • Very rough design. All welded. Half of these connections could be solved with bolts and nuts. The fixing of the rope with two clamps - NO WAY! Pure flub.

    @Guzzi_Cali2@Guzzi_Cali2Ай бұрын

  • Can be dangerous when you release the locking ratchet...

    @RegiPavan@RegiPavan2 ай бұрын

    • Not dangerous bro. It's very easy to handle

      @DiamleonDiyBuilds@DiamleonDiyBuilds2 ай бұрын

  • No estas usando la herramienta correcta

    @joseangelalatorrevelazquez4934@joseangelalatorrevelazquez4934Ай бұрын

  • Demonstration not clear

    @jassalmedia6877@jassalmedia6877Ай бұрын

  • There's only a couple of problems with all these DIYs. He doesn't give the dimensions of the metal cuts and widths and other stuff and secondly,,, how many average people has the kind of tools like that lying around to be able to make stuff like that? LOL

    @dawnac6453@dawnac64532 ай бұрын

    • Well I think what this gent is doing is good and it's up to you to decide how big or small that you want to do this hence the measurements, and secondly as tools go use the brain cells and make minor modifications and build it using what u have on hand, myself 3 different welders and different sized grinders so modification away I go, lol, and say instead of welding all together why not drill and bolt it together lol

      @nancycook3733@nancycook37332 ай бұрын

    • @@nancycook3733 yeh well not everybody has a complete STEEL WORKING shop in thier backyards either. I'm not saying he doesn't do good work because he most definately does...but try doing it without all thise mills and lathes and drill presses. That's my point. The measurements would be a BIG plus... Not just showing a hunk of metal and expecting it to work. I don't build ANYTHING without some kind of measurements. I also have welders but not the fancy ones. Mine is only good for doing small projects. And your bolt and hole theory might work for some stuff... But not all. Just makes things much more complicated.

      @dawnac6453@dawnac64532 ай бұрын

    • So if you want to get measurements you have to pay subscription 😅

      @sunil2102@sunil21022 ай бұрын

    • он даёт нам возможность, когда мы лежим на диване,думать что мы работаем❤

      @olegpoheretski190@olegpoheretski1902 ай бұрын

    • @@jimmiecharley6505 very good .. GENIUS!!!

      @dawnac6453@dawnac64532 ай бұрын

  • Ib

    @user-wh2ug7le8j@user-wh2ug7le8jАй бұрын

  • im starting to think youll never make an ice cream maker

    @maxinehardy9411@maxinehardy94112 ай бұрын

  • Nu prea va plac șanfrenele în rest 10+

    @luciancostin1543@luciancostin15432 ай бұрын

  • Não gostei

    @albertoaparecidosilvasilva2767@albertoaparecidosilvasilva27672 ай бұрын

    • Why?

      @DiamleonDiyBuilds@DiamleonDiyBuilds2 ай бұрын

    • Tem muitas máquinas no mercado mais eficiente e com preços acessíveis

      @albertoaparecidosilvasilva2767@albertoaparecidosilvasilva27672 ай бұрын

  • How much will it lift?

    @shawnwoods9280@shawnwoods92802 ай бұрын

  • Good idea sir/

    @TsimnujXyooj@TsimnujXyoojАй бұрын

    • Thank you very much dear

      @DiamleonDiyBuilds@DiamleonDiyBuildsАй бұрын

  • Or you go to hobo freight and by an electric one for $50.

    @highnoter1@highnoter12 ай бұрын

  • Very nice

    @ROVITTv@ROVITTv2 ай бұрын

    • Thanks man

      @DiamleonDiyBuilds@DiamleonDiyBuilds2 ай бұрын
KZhead