Antique Rusty Cleaver - Restoration
My friend has found this rusty old cleaver on the steel waste. I really liked the unique look of it with the hook instead of a hole to hang it on the wall. As christmas holidays were just around to happen, I knew I had to pick a project that I have all the material ready in my shop, because everybody was in vacation. So i choose to restore this cleaver.
The disassembling was done very quickly, so was the sandblasting.
The original handle was held in place with the peened tang. I didn't really like the shape of the handle and I also didn't wanted to peen the handle again. Si I decided to make a more ergonomic nice looking handle. That's why I shortened the tang around 45mm and drilled three 5mm holes in it. That went very well as the tang wasn't hardened. Next I wanted to make it mirror polished. I startet with the belt sander to grind away all the pitting from the rust. Then it was time for hand sanding. I started with 120 grit, after all the scratches were gone from the belt sander I moved on with 240. Then 400, 1000 and 1200 at the end. I then had a fine enough surface to be able to mirror polish it on the cotton buffing wheel. It took quite some time to do that, but the end result came out absolutely amazing.
Moving on to the handle. I decided to make a three part sandwich. I started by making a spacer out of smoked oak. Cut out the shape of the tang and then glue it on to a piece of pear tree wood. Then I was able to file the spacer to the same tapered thickness of the tang. After gluing the other side of the handle on and drilling the holes for the rivets through I could start to rough shape the handle with a rasp.
I decided to make three screwable brass rivets. I applied some Loctite on the threads and tighten them together. After that I filed the slotted heads away, flush to the handle. Then it was time to give the handle a final sanding with 120, 240, 400 and 1000 grit and apply linseed oil for the final touch. And after sharpening this job was done completely.
I really liked to work on this cleaver. Mirror poilishing was a lot of work and also the work on the handle was quite challenging, but I really liked the end result and I think it speaks for itself.
I hope you like my work and the video.
Huge thank you to all of my Patreon supporters and specially to:
Tonya M Broerman
Zack Thompson
Adel AlSaffar
afreeflyingsoul
Yale Baker
Gregory
Alex McGeorge
Alistair Moor
Amar.k
Anthony Eufemio
Bendurion
Courtney Maleport
David Barker
Greg Marston
Josh Ledford
Joshua Bentley
Lambda GPU Workstations
Luke Schmick
Luke Stone
Matt Boothman
Mellissa Marcus
Monte Gibbs
Muzaffer Aksoy
Nick Houston
Paul Mampilly
Pong Lenis
potokslow
Schultes Thomas
Thomas & Jenni Wendel
Todd Medbury
Tyler Carruth
Vickie Bligh
Vince Valenti
Xavier Carbel
Yuri Zapuchlak
Aaron Quante
Acechadora
Ajna
Alex Breton
Allen Frank
Amanda Taylor, Esq
Andreas Mimra
Andrew Phillips
Anthony Adams
Arni Bjorgvinsson
audi4444player
Blake T
Brandon Fitzwater
Brian Newton
Carl Savage
Carlo
Chad Bryant
Chris Simondet
Grok Senften
Haley McFadden
Harper Kim
Hunter R.
isioviel
Jason Koi
Jason Tarlov
Jeremy Cole
Jonas Richartz
justin f.
Kelly Imgrund
Kurt Gazow
Marc Cerisier
Martin Rønnow Klarlund
Mellissa McConnell
Michael Bier
Mickey Eisenhorn
Mike Donaldson
Nick Cannon
Pasacal Schmikal
Philipp
Regis Vincent
Scott Marshall
Sejo Gavisch
Sergei Shvartsman
Stefan Halter
Subramaniam Venkitaraman
Suiros
Svenja Kuckla
Trevor Kam
Tucker Ifft
Warren G Strand Jr
William Wallace
웅록 윤
My camera:
Panasonic HC-VX11
I payed a lot of attention on the lighting when filming this video and also the quality of the sound to create an ASMR style video.
If you have any questions about the process, machines i'm using or other stuff, just ask me in the comments. I read them all and i try to reply as soon as possible.
Sorry for my bad english, it's not my language. I try my best to improve my technical english.
Subscribe for more of my content. I'm uploading videos about mechanical stuff, as new creations and buildings and also restorations.
Thank you for watching :-)
Building a Huge Rotary Tumbler from Scratch - Homemade Rotary Tumbler
• Building a Huge Rotary...
„I make a new one“ T-Shirts:
teespring.com/stores/my-mecha...
My Main Channel:
/ mymechanics
My Second Channel:
/ @mymechanicsinsights
My Patreon Page:
/ mymechanics
Spends hours "roughing" handle with a rasp like a blacksmith from the 1500s then walks over to a mill lathe and perfectly machines false rivets... What a craftsman.
that confuses me greatly. but to each their own i guess
also uses a sander to sand the blade then doesn't sand the handle to rough shape :(
I found a old tv idk 60s or 70s
always chops a nice heavy tang...no balance.
@@rhinostrange8025 88998
This is just content, no intro, no outro, just content. This is why this channel is great
Thanks a lot for being here :-)
No stupid music.
He is man
Great result but I must admit I was a fan of the round handle it came with originally. Might not be ergonomic but it looked more like a medieval weapon that way, kinda badass.
I know, feel like it had a better look
Agreed!
Согласна с вами
i felt that too but realised how much more practical the handle he made for it was now it wont flip around when you swing the blade
@@benjaminguinness7638 As a regular user of kitchen knives, I've never had much difficulty controlling round-handled knives. I was going to say my problem with it was how he cut off most of the tang, but watching over that part again it seems he only cut off the very tip. The camera angle made it look like he cut off a lot more.
It’s crazy how much craftsmanship goes into making something as simple as a rivet
Thats not a rivet
@@englandwasamistake7094 it literally is it’s called a false rivet or a Chicago rivet witch means it’s a rivet
@@Chickennoodlesoup0117 Thats like saying faux leather is leather and not plastic just because it's called leather. If it has threads its a screw.
I know
top
best tool restoration channel on youtube. period.
:O hi :D
statement of fact
And it’s not even close.
There are three periods
Agree 👍
I wonder if this geezer instantly knows exactly what tool and technique he needs to use just from looking at a problem. Because I can't help thinking that even if I had a workshop with all the tools he has, all the liquids and sandpaper, everything, I'd still spend forever staring at a rusty bit in an awkward place to get to, and I wouldn't have a clue what to do. His skill lies in not just his techniques, but in being able to assess a problem and solve it in the most efficient way. I guess that's all from experience. I don't think this is something that you could learn how to do with a course in restoration. The man's a genius.
Thank you very much, I really do appreciate it :-)
I actually wonder that myself. It must've taken a lot of time as an apprentice to learn which techniques should be used for each problem.
He probably does know exactly which technique to use to deal with a problem because of his experience, even I've gotten a feel for how to solve particular issues just by watching his videos
And he did a good job in woodworking without any woodworking skills, knowledge or tools. Hut ab.
geezer?
This gentleman's machinery skills are meticulous and incredibly precise it's so relaxing watching him work.
Many thanks for watching :-)
@@mymechanics my pleasure I am a chef and I respect and appreciate tradespeople that take their work to the next level. That's what I always try to attain so seeing it applied elsewhere brings a great big smile to my face! P.S. that cleaver is something else I would love to have it my collection! 🙂
You are exactly right and what I have also been thinking!!!
It’s nice to know that things like this can go back out there in the world and be recirculated instead of rusting away in some dusty forgotten about location. The circular economy is something I find truly beautiful when done right. I used to wonder why people at the flea market sold rusted axe heads with broken or no handle when I was younger about a couple of years ago and then I realised something that should of been obvious, I guess not from a 13 year old, and found out they can actually be brought back to life and possibly be used for indefinite amount of time as-long as they’re taken care of.
"Doing rough handle shaping with a rasp". Does perfect, full shape of the handle with a rasp. He's too humble.
The result of that handle (done by hand) shows your craftsmanship. Absolutely brilliant as usual. Hats off 👏🏻
Dude you are the "my mechanics" twin brother when it comes to watches restoration. Are there any new videos coming out soon?
>
@Mina Ashido I thought that too in the beginning but the final result was great.
could have been done better like using the tang and not cut it off
@@nicolausteslaus no he didn't have you ever restored something before
What's most cool for me in terms of progress if these videos, is making the screws and rivots yourself. I'm casual, I need screw, I go to the store. To see the made by 'hand' is really cool.
Thanks for watching, much appreciated
@@mymechanics Love your videos. I'm primarily a woodworker and just wanted to comment that it is never necessary to sand wood finer than 320 or 400. This can cause burnishing with most woods, preventing the finish from penetrating the grain. For most purposes 220 is as fine as most fine furniture wood is sanded before the application of a finish. With a plain linseed oil finish, 180-220 grit is plenty fine. Also curious why you would hand rasp the bulk of material off the handle when you have that awesome belt sander.
I love that the brief glances we get of your studio are because you polish it so so well it reflects it
9:00 I'm totally stunned by this part : turning beautiful, perfect, chamfered screws, to completely erase them afterward with a file ! I now just want to see somebody restore it again in 80 years and discover them while disassembling it. It's no longer a restored cleaver, it's now a piece of luxury. Kudos for surpassing yourself each time and surprising us in every video of yours. Thanks.
Not gonna happen. In 80 years this cleaver will still be mirror shiny and cut paper thin meat.
If it was going to happen, probably they would be just drilled of and the restorer will never known how they were made.
This dude puts more effort into the restoration of things than half these places to do make them
That might even be true lol
Ikr
Way more.
Definitely true !! I am sure that a good percentage of these items are better than when new by the time he finishes ..
@@mrwaddles5054 ใบ
I appreciate a craftsman who demonstrates on a consistent level, a total commitment to attention to detail. Well done Sir.👏
The hook was not meant for hanging, but is a "gut hook". It should be sharpened so as to be slipped under skin and fascia and dragged backwards to slit it open. It's a common feature on modern hunting knives. Amazing work in any case.
Thanks for the info
Wrong that hook is for grabbing slabs of meat and pulling it over to your work station no gut hook would be attacked to a meat cleaver the gutting is done way before the meat ever makes it to the stage where this tool is needed which is mostly just chopping larger portions of meat into cuts
@@Akdave2020 maybe simple hooks have multiple uses :/
@David as i gather you‘re also wrong. This kind of tool was used to make tinder from brushwood. The hook was used to pull the brushwood from a heap gathered in the forest. It‘s a practise known as „Wellen schlagen“ in Southern Germany. Source: My Parents having this kind of tool hung on their patio wall.
That is also why the blade isn‘t developed to resemble a knife and the handle is unergonomic like @my mechanics put it. It was more used for beating than cutting.
Me at 2 am: please I want to go to sleep KZhead: what to watch a guy repair a rusty knife? Me: YES I DO
LOL 😂 me too
it just hit 2 am when i clicked on the comment section and saw your comment
@@vam2640 im watching this at almost 5am i need to sleep lmao
@@b4ph0m3t its been seven hours of me playing genshin impact straight, im playing as im writing this comment
@@vam2640 genshin is bad man
sandblasting is hands down, visually the most satisfying thing ever
You should check out the pulsed laser rust removal. It is even more satisfying. Perfect for removing rust, or paint, while preserving really well the surface detail. Sandblasting is also good, but can erode metal more if you are not careful, but also sandblasting is better if you plan to later paint the surface. I could watch pulsed laser removal tho whole day, it is cool.
For veterans of this channel, the most satisfying part is the shiny new power switch on the sandblaster 🤣
@@glittalogik Ahh....you see its too...
Very satisfying to watch. Very bummed out that you changed the handle though. That's one more piece of history lost to time. Wouldn't really call that a restoration.
Its amazing on how much a simple handle design can completely change the look of the overall blade. Before it looked like a medieval vikings cleaver, and now it looks like a modern high end clever.
new button on sandblasting, everything is perfect now
+++++++++++++++
that was the reason I immediatly checked the comments
I kinda miss the old censored one.
ive never seen a knife with that little hook curve on top, it’s so unique and pretty!!!
I thought that too. I bet it's so you can hang it up on a hook or rack from the ceiling. Most cleavers have a hole in the blade for the same purpose. P.S. I love your pfp
i would use the hook to get it stuck in someone. i have a twisted mind lol
@@journeywaitz5826 bruh
@@journeywaitz5826 not quirky
@@journeywaitz5826 what a different unique scary girl/boy 😱😱😱😱😱😱😱😱😱😱😱😱😱😱😱😱😨😰😰😨😰😰😰😰😰😱😰😱😰 Anyways, yep, not quirky
After watching other restoration channels I always come back here - you are just absolute levels above everyone else on youtube. I find myself critiquing other channels using your methods as the gold standard.
You are correct !!!!!!
This is by far the best restoration I have seen on here in a very long time. Well done! You are a credit to your craft.
Nice to hear that, thank you very much :-)
Could you have salvaged the old handle?
@@Downsouthroots It was obviously rotten inside, and therefore weak - wouldn't have lasted long with regular use, no matter how nice you make the outside look.
My fav part when he said " " Makes my day every time !!
lmao hahhaha
I didn't like this old handle I make a new one ;-)
Exactly!!!
The rivet making part was mesmerizing...
this is my favourite restoration video of all time. i come back every now and then and watch it again
You might like Slavic Tely as well. (Maybe you know him already) he makes gorgeous knives. 😊
The Chicago rivets scene at 8:38 is beautifully shot. I always enjoy your work, but late to the party on this project!
Thanks a lot!
"I'm going to make my own rivets" casually stated because that's normal.
He does « make new ones » for pretty much everything. Your car lost a tire ? He make new one. Humanity has almost be eradicated by zombies ? He make new one
@@Dabigboii my mechanics was reaponsible for the Men of Iron in 40k, canon confirmed
lol
Well for this guy it IS normal
@@vangyng lok
...compared to all other restoration channels and videos on KZhead, this guy has succeeded in making it an art. he simply is in another league.
I can just tell this is legit due to the sheer amount of work that was done to restore it. Good stuff
I've been very sick for about a week and your content has been calming through the worst days. Thank you.
Thank you very much, I'm glad you like it :-)
When he slotted the heads of the rivets, I thought there was no way he was getting them flush, then I realized what he was going to do, and he did it. Amazing work
Brilliant attention to detail. Perfectly slotted heads with correctly weighted screw driver just to get them adequately tight, then filing the whole thing flush and erasing the evidence.
That was the dumbest crap I've seen in a long time. There was no point in making the screws if he was going to file them down . It clearly wasn't intentional
Can we just appreciate his patron Pong Lenis?
Chad
Who???
I have never seen a handle be made in that way but after seeing the result I absolutely love it. The sanding and polishing part was extremely precise and well made as well, can't say anything other than that I love EVERYTHING about the way you worked on it! Also the rivets are masterfully made and the handle choice is beautiful!
Glad to hear that, thank you very much
@@mymechanics ruined original
Your videos are mostly like relaxing and meditation rather than a restoration project. Keep going 👍
Glad you like them!
There's no logical reason I should still be this impressed with your work...but here we are and still impressed 👏 🤯
Thanks a lot
First video where he's left a sharp edge 🤷♂️
If there ever is an Avengers level threat, I would ask this man to create my weapon.
Thanks a lot for watching :-)
Most gifted craftsman on the Internet. Truly out of this world skills.
Thank you very much, I really do appreciate it :-)
This feels like the scene in toy story 2 when the guy fixes woody
Glad you like it :-)
If this was the same, woody wouldnt be worthy of exhibition. the crappy handle was part of the antique quality. this is pretty much a new cleaver with an old quirk. Not complaining. Those techniques and the design, precision, etc. so cool
@@mymechanics tell me what level is your smithing stat 🤔
@@jadeywhosshady3058 ok nerd
I'll never be fully convinced that when he sandblasts something he isn't just painting it gray.
A job well done. I love how you haven given the clever a new lease of life.
Awesome handle🥰
The best i've seen ever, i would even say!
Thanks Tysy 😉👍
Aww my other favourite 💕
TsysTube, your work is really excellent too! Post more perfect restoration videos, I've already seen everything you have posted. haha.
Now we are waiting on something from you Tysy. It's been a month!
My girlfriend: This relationship isn't working. Me: I make a new one.
Seriously though, I cannot say it enough: I love this channel. I love that there is no loud intro or outro, no commentary, just pure content and genius. I fall asleep to these videos because they remind me of my grandpa’s workshop.
Nice
Master Craftsman, meticulous, beautiful, genius...very satisfying to watch you work and make something most people would assume to be worthless into a work of art!
I’m watching these at 1 am cus I got nothing better to do with my life tbh
Thanks for watching :-)
me too but it’s 2 am for me lol
Me three but it’s 3 am😂
@@raccoonman808 me four but its 5 am
same buts its 12 am
I imagine someone will be really mad when he discovers that those rivets are actually chicago screws, trying to restore this cleaver 100 years from now
Nah... won't need restoration for at least 200 years. Until then we will have CAT scans at home like we have printers now.
@@marcoskunrath5914 by that time.....we'll be back
I imagine this someone desperately trying to find Chicago screws replacement "because this is how it originally looked like" and "i make a new one"
да ничего, высверлЮт )))
The Cleaver looked beautiful after your restoration. That is really fantastic work.
Thank you very much!
Какое удовольствие смотреть , как обновлённый тесачок смачно разрезает помидорку.
Tomatos will learn to fear the knife
Perfect timing! I was just watching old episodes.
Me too! How funny
Thank you guys so much for the support :-)
Even the smallest details are taken care of, perfect job done , as always...👏👏
+1
++
+++
+++
The spacer wood is a nice contrast with the handle. I’m glad you restored the engraving.
The rivet-making process was incredible
Riveting Smh
This is not about just a restoration, this is art.
Isn't that the truth?
When you started cutting the tang I was like "NOOOOOO!" But looking at the final result i cant argue that the ergonomic handle you did is much better.
Fer sure. As a functioning kitchen tool, this thing is infinitely better today than it ever was in it's lifetime.
@Feather Blade I'm sure it does, and not for the better as far as original purpose is concerned, but I believe that it is instead now a perfectly fine kitchen tool. It's not like it's gonna be used for 50 hours a week anymore :)
wait this was used in a kitchen?
Craftsmanship of sheer beauty for this 70 year lady, reminds me of sitting on my father's bench and that is where I got my love for it Thank you
Yeah, this 66 y/o lady loves watching him work. And yeah brings back memories of my dad too. 💖
Outstanding! Watching you mill the rivets; inspiring craftsmanship.
Awesome, thank you!
Literally anything with a rough edge: exist My Mechanics: §MØŐŤH
I really appreciate the added subtitles on what you were thinking in each step.
What a beautiful work of art you've created! I'd love to see more of your work using Dark Woods like the smoked oak you used in this piece. Bravo!
Nice to hear that, thank you very much :-)
I preferred the look of the old handle but the sheer work you put into the new handle is amazing. The new handle is very beautiful
I appreciate your oppinion, thanks for watching :-)
And the Saturday is rescued. Thanks for giving me a reason to wake up early and enjoy watching your video, before I go to the shop!
I wouldn't say you changed your style, but somehow you improved it once again. The close Ups and filming in general was top notch. What kind of drill-tip/drill did you use at 06:55 to countersink the holes so accurately?
It's a customized step drill. The step drill had a small diameter of 4.3mm and a big one of 7.4mm, with a 45° cone between them. But the holes of the tang and the pre drilled holes in the handle were 5mm. So I pressed on a little aluminium tube on the small drill that was just a little bit under 5mm. I made a little Zapfensenker out of my Stufenbohrer haha
@@mymechanics very clever. Well done and thanks for the answer on such a busy day
"This requires sandblasting" You're damn right it does.
Wat da heck is sand b l a s t I n g
Sand go *woooosh*
I get little excited when he does that So satisfying
@@poppyseed.3421 سلام
@@poppyseed.3421 6
just think about how much work goes into these videos. im shocked, like bravo. i am impressed. you did great job, and also thanks for entertaining us. keep it up. i enjoy these.
Отличная реставрация. Лучшая которую я видела. Смотрим и любуемся. 👍👍👍
The man with a grudge against sharp edges takes on a cutting blade restoration. Uh oh.
I agree Defective, it is like the immovable object meeting the irresistible force.
Only the edges that aren't supposed to be sharp.
Me: No don’t change the handle! Me 10 min later: damn! That’s a much nicer handle
I was thinking the same.
The new handle looks amazing. But I would have liked to see him restore the other one. Or build new but same style.
The original looks designed to snap into Lego hands.
~ "Slam!..der..der..der/der..der..der....Used to love "Onyx" back in the 90's....
made his own screws and then filed them down to little nubs. Wow. Much nicer handle.
The result of that handle (done by hand) shows your craftsmanship. Absolutely brilliant as usual. Hats off 👏
Thank you so much 😀
It’s 1 am and this is what I choose to watch. I stand by my decision.
If only i could restore my will to study as easily as this
bruh lmao
If only i could restore my will to live
Just make a new one
This dude must have like a whole room full of weapons he’s repaired
He’s safe
So nthn attacks him
He’s ready for the apocalypse (after corona)
Most likely sells some, or is restoring them for customers. It’s an art form, with any art form comes collectors and restoration craftsman such as himself.
That's my dream room
I think this is the first and only restoration channel that hasn't made me want to bang my head against the wall by making terrible decisions during the restoration that destroy the item things like keeping the tempering in mind just make me so happy in these videos
Thank you very much, I really do appreciate it :-)
Great to watch someone who knows his work 👏 wow brilliant. 🇮🇪
Thanks for watching :-)
It turned out very well. The perfect choice of wood. Thanks Radek
Who summoned me?!
where is this guy from???
@@Siticmon Switzerland
1:24 SandBlasting is so satisfying. It's like painting.
So. Deeply. Satisfying.
that and the bluing - watching him paint it on, then a few seconds later darken is so satisfying
Someone said sandblasting is like "painting in reverse". Always liked that analogy :D
Very well done!! It's so beautiful. Love the handle!
Thank you very much!
So well done! Your skill for perfection is amazing.
Thank you very much :-)
I love this channel. ❤️
Thank you very much :-)
Wish he posted more. That’s my only complaint
It really is incredible
@@ionutbadulescu3673 I'll take quality over quantity any day.
You an i brother
Wow, how new! I love the result! I'm about to see a video like this coming out soon ...
Hope you like it!
Hidden tang with the brass rivets and the two tone handed is A R T. Amazing craft you have sir!!
Viendote trabajar me recuerda porque soy mecánico y porque me gusta tanto este oficio,gran trabajo
Pitting and rust. This man has declared a WAR on pitting and rust. And he is winning it!
Don’t forget corners and rough edges.
This Just In: "One of the continents just broke in half!!" my mechanics: "I make a new one"
BRO BUT THE SCP YOU LEFT THOUGH, HE BREACHED CONTAINTMENT AND WENT TO GATE A
Walter
Intresting
I like that you don't spoil the reveal in the thumbnail
So relaxing to watch -that’s craftsmanship at its best
some guy in 100 years restoring this knife: "hey, these aren't real rivets..."
Other guy says: "Must've been made in Chicago"
Probably they would be just drilled off, the next guy will not even notice
Other guy would “make a new one”.
@@borysnijinski331 "make a new one" is my favorite phrase on this channel.
@@jadefalcon001 true.
This man is the master... can’t tell me otherwise lol
Thanks a lot
This guy has mad skills and every machine tool known to mankind.
That lathe shot is absolutely amazing
Is anybody else always trying to detect when he’s gonna say “I make a new one” before he says it and you be really happy when you get it right? Or am I just weird?
no not just you, I do it too hahaha
Yea. I try to predict which part will need to be made. Lol
This time, he actually puts sharp edges on it instead of removing them :D
Rofl, good observation!
The one man war on sharp edges is over. Good catch mate!
That is f'ing gorgeous and incredibly badass. The hook on that thing is just vicious! Awesome stuff!
Thanks a lot for being here :-)
That was more than a restoration, that was a transformation to make the tool a million times better.
Glad you think so :-)
"G & Cie" would sure have tears of joy in their eyes when they would see this
I'm surprised no one has tried to figure out what company that is. I wonder if they are still in business.
Andre? Are you the guy from Spigot? Nice to see you here.
@@jimthesoundman8641 Could be just about anything. It's French for "G & Company".
@@Llohr Like how we use Co.?
@@SourGummiWyrm69 Yes, exactly
I like seeing him champher those brass screw heads although he knows he is going to file them off completely... :-)
Heh. Nobody likes cutting their fingers on sharp edges when assembling stuff.
100 years later: someone new finds this knife rusty again and makes it nice again
That would be cool
There is something very satisfying watching all these restoration videos. How he made the rivets was especially hypnotizing!
You ever seen hot rivets used on ships and steam engines?
Glad you enjoyed the video
every step I keep thinking 'stop no what are you doing its perfect' but then he just keeps making it better.