5 Tips To Better Flux-Core Welding
2024 ж. 15 Мам.
820 455 Рет қаралды
This video is about 5 Tips To Better Flux-Core Welding
Affiliate Links:
Silver Streak Pen
amzn.to/2dqlDKf
Anti Spatter Spray
amzn.to/2dytYYi
Nozle Gel
amzn.to/2d8tfil
Flux Core Nozzle
amzn.to/2djnlaS
My Newest Welders
www.usaweld.com/TIG-WELDER-In...
www.usaweld.com/Pro-Pulse-220...
#fluxcorewelding #fluxcoretips #fluxcoreweldingtips
Here’s another marking tip. ONLY use silver streak (or “prismacolor” silver), soapstone, sharpie or a similar permanent marker, or a scribe / scratch awl. NEVER use a common pencil. The graphite will corrupt your weld. Sounds odd, I know, but it will.
Great tip. Thanks.
carbon alloys
A honest guy trying to help.... excellent vid ... cheers mate !!
Col Auty thanks.
I have never welded before, but when my husband passed away in February 2020, I pulled out his 90 Amp Flux Welder & never realized that the flux wire actually fed thru to the nozzle. I remember when my Daddy welded, occasionally, he would take the end of the nozzle & hold the wire seperatly dipping it in flux as he went on. The deck has broken on my Husq zero turn mower & I was hoping to try my hand @ welding. Thank you for your informative videos! I may not conquer the world, but just maybe @ least a mower deck.😁
Bobbie Williams-McClelland that’s awesome. The first thing I ever welded with my original welder was my Dad’s Mower deck. It was god awful ugly as welds go, but it outlasted the mower. Good luck and let me know how it goes. 👊🏼👍🏼
OMG! Me, too with the mower. I have an ancient relic (Ranch King Pro) and the deck looks like Swiss Cheese with one of the deck wheels MIA. Learning to weld so I can get the giant holes fixed and put the wheel back on. Good luck to you!
The most important tip I can give is to cover the top of your welding helmet with a flap of cloth that goes over the back of your head. That way the sun doesn't ruin your view of the weld.
I use it too... excellent... except one day welding "above".... the cloth caught on fire..... Why is it so hot in the helmet??? lol
@@andybutler6968 makes a change from finding your jeans are on fire though 😂😀
i wear a cotton hoodie and pull the hood over the helmet
wearing a cotton cap is good too, it keeps grinding stuff out of your hair so it doesn't drop into your eye.......ouch metal in the eye
I have one that attaches to the front since my beard is way longer now as well as one from behind. That makes a huge difference for any stray light. Supper helpful.
Been welding for 35 years I've never used jel or spray get your heat dialed in that's the main thing lot of people don't realize you can use your wire speed as heat control
Steel Mill the gel and spray are very useful. But most anti spatter sprays don’t work well, and that gives the business a bad rep. I get mine from McMaster-Carr, I forget the name offhand, but it works very well.
Anything that can cut down the splatter and crap from flux core is nice. Being a welder for 35 years i'm guessing you're using shielding gas, which in that case these products aren't helpful really.
A really helpful video with real hands on advice. Also your video is produced in a grown up way , very clear and no crazy music. Thank you bud.
Chris Candlin thanks. Sometimes though, I do use crazy music. 😊
@@ManCrafting LOL just warn me in the title of your new vids, now I am subscribed to ypour channel
Great tips, also cut the fluxcore wire before you start your next weld. It will make for cleaner starts.
-Cyru5- another good tip, which I typically need to do anyway since I bump the trigger all the time.
Thanks! I'm new to this and picking up my own flux coreq welder on fathers day when the sales all drop. I'm trying to soak up information like a sponge!
As a beginner I find this type of vid very helpful. Thanks for taking the time to do this.
Thanks for taking a minute to comment and let me know it helped. I appreciate it.
Been welding for 11 years and do it as a career and you made some good tips for people starting out. I love everything about welding
Clyde Meeks wow. Thanks. I am with you. I love every minute that I get to weld. I want to learn TIG next. Only had 1 opportunity to try it. It’s a whole new ballgame.
@@ManCrafting it's a blast ! It's my favorite type.
God is my fortress VerHalen I definitely like it, but I will wait until I learn how to TIG before I make up my mind on which is my favorite.
@@ManCrafting TIG to me ,is like GAS WELDING ,WITH A FOOT PEDAL
If you need the flux tip to see, you don't have enough wire out. Recommended to have a half inch. The gas nozzle will keep you from arcing out your tip. Cooking spray works as well as splatter spray and if you have to have nozzle gel, again, your not allowing enough wire to be outside the tip. The absolute most important thing is abc, Always Be Comfortable. Relax, don't put a death grip on the gun. Better beads through relaxation. If you can't find the serenity in welding, the focus that makes the world disappear, you will never be happy with what your doing. After 40 years, loving what you do is what makes the best projects, that is the truth of my career.
My dad told me the same thing, add once I got comfortable (literally, of course, I mean physically relaxed and comfortable, not "confident in my technique" lol) before starting a weld, I've been doing much better, and able to concentrate on the puddle rather than how I'm going to shift my body enough (or little by little) without moving the torch and screwing up the bead 😂
@@taylorsellers5244 so true
Thank you tried flux core welding at trade school hard for me to get a grip be steady in my travel angle and distance from base metal to nozzle too close a lot of splatter inconsistent welds
"the focus that makes the world disappear" - This guy knows.
Great video pointing out a lot of things I had to find out through trial and error over time.
Thank you for making this video. I learned something really interesting in under 10 minutes that will change the way I weld for the better indefinitely. Preach on brother weldacraft.
I’m a woodworker, but I have been watching flux core welding videos lately, and am considering buying a inexpensive FCWer. Your video was educational, thanks.
Look at the Eastwood Mig 135. It was a quantum leap from the HF I had previously. That said, I know HF has a new line that’s better than they used to carry. Worst case you take it back.
Good tips for the likes of me. It took me six months to figure out I should have been wearing prescription glasses behind my welding helmet,as I had come to the age when I thought the writing on packaging had become smaller. That silver streak pen and better ambient lighting could be my game changer. Like your style and thanks for your no bullshit presentation.
Andrew Butler thanks so much Andrew. Comments like these are the reason I continue to put out videos. 🙏🏼 🙏🏼🙏🏼
Hi. Just came across your video. Thanks for the tips. I sell welding parts etc for a large company in Australia, thought I had it all covered, hadn’t even considered the reducing of the nozzle for better visual. GREAT IDEA, am going to pass this on.
Thanks for the tips and links in the description area.
Had to chuckle when you said that about the only guy in a fabric store. I remodeled a rock-star tour bus and had to get ultra-suede and foam backing for all the walls and ceiling. Nobody asked if they could help me, so I had to ask for help. The total bill came to over 3000.00 dollars. I bet the next guy after me at that fabric store didn't have to wait for help.
Haha. That’s awesome. It’s true. I almost always have to track someone down to help. I think there was a couple years where they actually saw me frequently enough to know me but I only go there every few months now.
I was introduced to spraying anti spatter spray on parts before welding them at the current place I work an my whole mind was blown lol. That’s a great tip that not a lot of people do or know of at all.
I agree. I’ve not seen it recommended much but for me it was a great find. Thanks.
All great things to keep in mind. Thank You!
Great presentation. Well thought out and to the point. Thanks
Just getting into welding and love the tip about the silver pen, thank you!
Glad it helped. Thanks for watching.
I'm just starting out with a Harbor Freight flux core wire welder I have my hood my gloves well wire and I never would have thought of sun in the helmet obstructing your vision, but that's why I look at these comments there's a lot of information in them thanks very much. And nobody ever said anything about a puddle until recently now with the cameras we have you can see the puddles I understand a lot more about it.My dad gave me a book on how to weld I'm fixing to lay a stack of Dimes down LOL Again thanks for the information.
That’s awesome. I hope you are able to make some cool stuff. Thanks for the comment.
Thanks for the simple but effective tips. It's good to hear from someone who's just trying to get better skills without being too technical.
Thanks. I wasn’t capable of being technical at that point in my welding journey.
Excellent!!! 5 really good tips. Never would have known about using a different tip for flux core or the spray.
Love it keep up the good work. Merry Christmas my friend.
Thank you. Merry Christmas to you as well! 🎄🎁🎅🏻
Thanks for your videos! I am an amateur welder also and found that if I preheat the area I'm going to weld it turns out much better.
I had to do just that on a buffing stand I built since the metal was so thick. You are so right. Hot metal welds a lot better. Thanks for pointing that out.
Thomas Sinclair do you preheat on 1/8" angle iron?
Yes I do, you can see moisture drying up as you heat it, and I have better welds.
Thomas Sinclair I'll give it a try thanks!! what temp do you preheat to?
I never checked, I just watched the moisture evaporate off then start my welding. I use propane or map gas in the small container you get at hardware stores.
Great tips! You answered several questions I had like that nozzle, never felt like it was the right tip. Thank you!
Thanks Leo! Glad I could help. Thanks for the positive feedback.
Thanks for ALL of Your Welding tips.
Walter Campbell thanks for taking the time to comment. I hope it helps.
Close your eyes and listen to this guy talk. I feel like Bill Paxton (actor) is giving me flux core welding tips. :)
When I took welding classes the instructor told us that it's a must to put the plastic tip on and remover the metal tip. This was to protect the gas outlets on the gun. Without the plastic tip to closely cover the gas ports they could get clogged with spatter. Really liked these tips. Definitely gotta get those markers! Thanks.
Officer235 another good tip. Thanks.
Are the plastic tips standard for flux core and mig and tig welding? Are the nozzles the same size? Where did you buy them? Does harbor freight sell them?
@@rayteems3535 Yes, Harbor Freight now sells them, Home Depot also.
Loved your video ,straight to the point. No bs
Great tips! Much appreciated. Especially love the nozzle comment. Had no idea that you could switch them.
Thanks! Glad you found it helpful. It made a big difference in me as a newbie being able to see what I was doing.
Hi Great tips. I have one I found really helpfully for flux core welding in the garage. Get a little desk fan to blow the smoke away so you can see what you are doing Regards Ian
Ian Kidd another great tip. I am going to add an exhaust fan to my shed setup.
Do that right away. The smoke certainly isn't good for you. It is one of the first things I did once I moved my everlast welders indoors.
make that a must do like asp. welding gas smoke is not good to breath.
Thanks. I agree. When I did all of my welding outside, I always had an overhead fan, but inside I don't. So I have a fan pulling air out of the shed which is ok, but not ideal. Need to get on that exhaust fan with a hose to the work ASAP.
Very helpful video! Concise and informative, the kind of tips that are actually helpful to amatuers like me. Thanks, SUBSCRIBED!
Thanks for the kind words. I try to share the things I learn along the way. People that are true experts often are so far past where I am in the learning process they don't even consider these things to be anything more than common knowledge.
Great Video,Im just getting started,I bought a lincoln buzz box and a Lincoln gasless mig welder,I am going to build a small very functionable welding table /stand/storage that rolls ,I'm the biggest rookie out of anyone lol messed around just to scratch some paint off my brand new trailer because I didn't have any stock around and it's made out of quarter inch so I used it to get a feel for it lol I'll grind n clean it up later ;) Thanks again for the video,I learned some great information
I purchased a landrover discovery 1 cheap with a years mot had been fixed with newspaper and body filler now cut it all out to repair correctly I'm not a welder but now I'm getting the practice thrown in the deep end your video has helped me no end thank you
Awesome. It’s good to see that there are people that find this video helpful. Thanks so much for taking the time to let me know. It means a lot.
excellent tips especially the tip about the tip lol and the silver street, ill definitely be picking some of those parts up thank you sir . Great useful video, very helpful thumbs up bro, subbed
Manny Mack thanks! I should have more videos on welding very soon. Thanks for watching.
Thanks for the help , I am just starting out . I am building a hot rod , and welding will help the project .
Steven S. Gardner good luck. Sounds like a lot of fun with a huge reward at the end.
Thank you for the 5 tips!
My first job out of high school was welding caster plates and casters on front loader debris boxes, used to weld up to 1500 a day. I learnt so much back then much more than I ever did going to school to get my AWS certification. Was outdoors in windy San Francisco so flux core and stick is all we could use. Did that for 6 years straight before they moved me into the shop repairing trucks and machine work. The job is like a hobby for me because I just love welding. Now I build Board Track frames on the side for fun. Those were great tips for people starting out, very clear explanations too! Happy Holidays from NorCal
Farmer Fpv thanks. That’s a lot of production work. I’m guessing you got pretty efficient in no time.
@@ManCrafting yeah at first it was rough but then it just got easy, there's no quota of what I had to get done but I just like to work hard and soak up as much information as I can at the time.
Thanks for posting. As a result of watching this video some time ago I spent $55.00 for an auto-darkening helmet to replace my $9.00 helmet (excellent tip - thanks). I replaced the copper nozzle made for gas shield with one made for flux core welding (excellent tip - thanks). I started using the anti-spatter spray (excellent tip - thanks). I still have to get the Markal marker. Again - Thanks for posting.
Lloyd Tucker thanks for taking the time to let me know. I appreciate it.
Lowe’s has those markers.
Very helpful tips, thanks
Doug awesome. Glad it helped.
I may need to do some flux core welding with my everlast mig welder. I'm lucky to have stumbled on this video.
Milton Gwelch thanks for watching. I hope it helps.
Thanks for sharing. Just bought a flux-core welding and your input is very helpful. Best regards from Malaysia.
Awesome. Good luck I hope you have success.
awesome tips. didn't know spatter spray or nozzle gel was a thing
Mitchell Garcia thanks. I was surprised as well. I guess that's the problem with not having been taught.
I use a bit of spray on cooking oil as anti-spatter when welding with my everlast welders. Works pretty good!
Nathan Blanchet cool tip. Thanks.
Dollar store cooking spray is way cheaper too
audioentertainment if it keeps spatter from sticking does it interfere with the actual weld at all?
Very helpful especially the nozzle. You can also cut back a mig nozzle if you don’t have the shorty. Pam cooking spray works for anti stick. Best advice I ever got especially for smaller machines - get a good solid ground connection to your work. Grind off mill scale and rust where you will clamp, and clean your clamp with a little emery paper or something. If your machine has a cheap little clamp, upgrade it to a high amperage clamp for just a few bucks. Or wrap each clamp jaw with copper wire so there’s more contact surface. Finally, make sure the workpiece has a good connection to the table if you are clamping the work lead to the table, and attach the work lead close as reasonable to where you will be welding. Low input 120v input welders need all the help they can get, so the better the circuit / lower resistance, the better. Reduces splatter and vastly improves weld. Night and day. Cover the back of your helmet to block out light and reflections in your hood. Good use of eye protection glasses. I’m going to try a pair that they now make with reading lenses
R Johnson great tips. Thanks for the thoughtful comment. Always appreciated.
Thanks for all of the tips. I will be using flux core in my everlast welder this week.
Awesome. Let me know how you like it. I haven't ever used an Everlast.
I too discovered the tip for Flux Core wire. MAKES A BIG DIFFERENCE! So much easier to see.
You are a great presenter
That is a very kind comment. It's something I strive to get better at. On camera it's not something that comes naturally for me. Thanks.
If can reverse the polarity on your machine, go DC negative, makes a difference on spatter.
Thank you for the informative video and tips.
Thanks for the tips. Love the idea for flux core nozzle.
ontherunjd I’m glad you found it helpful. Thanks for watching.
Amazing tips for a beginning welder, thank you! Especially the anti-spatter spray, I wanna have decent looking welds (as best I can with my skills lol) and spatter just ruins it with my cheapo harbor freight welder!
Keonte Concepcion I can totally empathize with that. Thanks for the comment. Good luck getting the welds you are wanting. It will happen.
I can wield great with my Harbor freight welder 125 nothing wrong with my Welds No splatter at all just started welding a month ago
John Booker that’s awesome. I’m probably a slow learner or I’m not practicing enough.
Pam cooking spray also works well, or any generic cooking spray, and much cheaper than anything you will find at a welding store. And at the end of the job, it comes right off, with brake cleaner/paint thinner/mineral spirits.
nice tips thanks for sharing......
Ray Falcone thanks for watching and taking a moment to comment. I really appreciate that.
Excellent tips. You've addressed several problems I've experienced. I'll correct them immediately.
Jay Stern thanks so much. Glad you found it helpful. Always love getting positive feedback and helpful tips.
Thanks for the welding tips
Yeah dude, great tips!!
Thanks Eloy, come on up to my shop and hang out. We can work on a welding project together.
Hey Chad, sweet vid. Let us know if we can be of any help!
LWELDS.com thanks! Will do.
Thanks for making a good, simple, and helpful video.
Thanks for watching and taking a moment to comment. It means a lot.
Nice vid, great tips. I like the pen so I paused the vid to order it. Been using soap sticks and magic marker fine lines forever but I think the pen will be better visually and all around. Thank you for that. Also, I didn't know about the blue gel, I've been spraying the anti-spatter on and inside the tip which seems to help but, I imagine I should try the blue gel, possibly easier to clean. Thank you so much for taking the time out to share.
As a virtual craftsman (so far), I see several comments preferring gas v. flux core, presuming b/c of the cleaner welds. What's the downside of gas... equipment expense, consumables more costly, gas volatile, other safety concerns? Meanwhile making note of great ideas, links really help too... many thanks for sharing.
+David S for me it was the startup cost of adding gas, the logistics of picking it up, uncertainty of setting the gas up and I was welding outside which to my understanding could be a problem on windy days. Turns out to not be much of an issue. But is suppose startup cost would be the biggest issue. You'll need to invest in a tank and then pay for filling it.
Since I tend to accumulate old tools, I'll have to price gas (tank, regulators, etc.) as I'd prefer getting equipped with one setup if not too pricey for an avid DIYer. The other factor is I'd like the versatility of welding stainless and aluminum in addition to steel.
its the same as buying flux core wire. they even out. mig wire is super cheap but flux wire is very expensive.
yes sir. the cost of gas is supposed to equate to the cost of flux core. granted, some people pay way more than others. for instance, i used to buy 2 pound spools for 20 bucks, now i buy 10 pounders for 50. if i could run a 33-lb then i would do that but my main process of choice is stick welding.
Hey David, there are 3 ways to weld mild steel on a wire-fed machine; GMAW (mig), FCAW (flux core), and dual shield (FCAW with gas). The three differ partially in the way the weld puddle forms and penetrates, and also in appropriate environmental situation. GMAW- must be used with minimal wind exposure. Must keep nozzle pretty close to the work piece, which may inhibit view of the arc depending on position. Easily read weld puddle. The silicone that forms does not obstruct view of the puddle much under the hood, so "pretty" welds are a little bit more manageable. You'll want a wire wheel to knock off the silicone pockets between passes. 75/25 argon/CO2 mix welds nicely, and has minimal spatter. 100%CO2 tends to have more spatter, but deeper penetration. Overexposure to argon is possible, but easily avoidable by ventilating well and not breathing next to your weld :) FCAW- preferably used outdoors in windy, or less forgiving environments and is common for new construction. smaller wire (0.030-.035) is more applicable for homeowner use but produces a lot of spatter and fire hazards. larger wire (.045) can weld faster, hotter, wider stringer beads and still maintain penetration and good profile; a combination of the inner flux and the arc force. Larger flux core seems to produce less spatter because the higher arc force. Slag will somewhat inhibit visual of the weld puddle's shape, making it more important to be able to read the arc, but will cool as a single piece- easy to clean! Lack of need for a shielding gas means your ctwd (contact to work distance, or stickout) has a much greater lenience. Change in ctwd will result in a voltage difference, and can be compensated for somewhat. BOTH- well, idk really. better protection, but too expensive for you and I :) in my experience [mig 3/8" open root 3g, 4g, (structural mig) and flux core at home and school] flux core is a little more practical for a wide open shop or just out and about. Its much easier to only have to worry about getting power to the site, unless you have a rig. Ability to weld without a nozzle and with longer stickout lets you get into some tricky nooks and crannies! In a small shop or shed- definitely MIG; fire hazard from FCAW alone is enough for me; that molten slag gets everywhere..
It is termed 'tip dip' for obvious reasons; just weld for about 30 secs and dip the tip into it. Like a flux it keeps the tip cleaner for longer and helps reduce spatter sticking. I prefer vegetable oil in a spray bottle rather than all those 'anti-spatter' sprays, it works well especially if you need to keep the bb's out of a place that is hard to get at. I rarely use it on gates, fencing and so on, but for professional jobs that require absolute cleanliness, I tend to use the vegetable oil.
im sorry but machine settings and whip angle eliminates spatter. if the BB's dont come off with chipping hammer go to settings.
Your "ramblings" are great tips....Appreciate it.....I also am just starting to flux core weld and I find that there is no substitute for practice, practice, practice. Your tips make it easier to do my work.
Awesome. Glad it helped.
Love the videos . Thanks for taking the time to make them. Great tips.
Joel James thanks. I love hearing when people are enjoying them.
Having a party here, every time we hear "Anti spatter spray" we take a shot.
Steven V take 5 shots fast. 🤣
@MG Stevens A welder watch party!
Good tips 👍
d.i.y.man thank you and thanks for watching.
Thank you from Norway. That helped!
Awesome! I have Norway on my short list of places to visit. My brothers company is based there and he’s in Norway at least 4-6 weeks every year. I’m also 51%. Norwegian so it’s also a little desire to see were my family came from.
Thank you, that really helped me.im just starting out and this really helped me
good stuff brother. I'm getting into welding late in my life also I'm a retired U.S. Marine and I did 21 years in Artillery but now I'm in welding college it's a one year program and I am looking forward to the career path . thanks for your vids... "MAN CRAFTING". cool term.... metal work is the deal bruh.. STEEEL!!!!!!
Bryan Calhoun congrats. I was Army and was attached to several FA units. Mostly M109’s. Where are you going to welding college? That would be an amazing change of carriers.
You the man, Good Luck!
Wow that sucks your a marine and now your welding??? So they didn't pay for your college ??
As FabKevin says, “If it ain’t steel, it ain’t real!”
Bryan you need to look into the VIP program that the UA has they help veterans get into the trade....helmets to hardhats
A few things I have also heard which can prevent spatter when flux core welding: keep your wire between 3/8" to 1/2" max beyond the end of your nozzle, this will also keep you tight with the work and keep you from straying too far away and lastly, if your welder allows it, try switching the polarity on your machine to DC-negative (straight polarity). This apparently reduces the amount of spatter significantly.
I’ll have to try it on that machine. I have new welders now, so I don’t use the Eastwood that much. Mostly if I need to take a welder somewhere.
DC negative,???
@@elfpimp1 yeah, you run your gun to the negative and the ground to positive. There are dc inverter machines where that's already done for you, but any machine that has the detachable connection lines, you should run DC negative for flux core welding.
@@elfpimp1 my flux core came as dc neg
@@nathanthreeleaf4534 ah, thank you!
Im not a professional welder either. I have a flux core welder and I like videos like this that teach me things about it.
Cool, thanks!
I’m just learning to weld, starting with a cheap flux core, these helped me a lot even years later👌🏻
Awesome. Thanks for letting me know. Glad it helped. 👍🏼
I still remeber my welding instructor said rule number one to welding is comfort lol . Just wanted to share some wise words
That’s actually a great tip. Thanks.
Great info, but a little bit of welding would have helped, me see the real McCoy. But I gave you a like because of your great intention to help others. Thanks
Thanks. I’ll keep that in mind in the future. But back then, nobody needed to see me weld. 😉
Thanks for posting. I will try these out !
Thanks for watching and taking a minute to comment. It means a lot.
Hey Chad ! Great video. I just bought a Mig / Flux Welder and looking for tips on how to use it. Really found your video down to earth and interesting so I subscribed. Been doing woodworking for a while and want to get into metal work. Presently building a welding cart but have not even plugged in the welder yet. I pick up trash and started with a BBQ for the main frame then some metal gazebo from another dumpster dive. Got some parts cut and cleaned up and ready to start so thankful for all your tips. Keep up the good work.
Malcolm Hall enjoy it! If you have a decent welder you're going to have a blast.
Still getting the hang of it. First project is a welding cart made from a discarded BBQ. Burnt a few holes on the first attempt as the metal is thin but picked up a few tips and will practice on scrap first.
If it's a DC machine, INE flux core wire will help a lot with less spatter, smoother beads, and easier arc control. Especially good on smaller machines. Soap stone works well on steel with mill scale, light to medium rust, any surface that is rough. Silver streak is good for smooth surfaces. You prolly need both if doing basic farm type field repairs (where flux core shines, not getting blown away by breezes). An orange galvanized marker (paint pen) is good to keep around too :-)
That’s a great point. My first was the harbor freight 90amp and it was AC. I was going to do a video on converting it to DC, the bridge rectifier was bad. So I trashed it. 🤷🏻♂️
I had a argument with my dad about taking off the cup at the end of the flux core wire feed welder. in a tight space just take it off.
It's more important when your using gas. No question.
can I get that in writing and hand it to my dad LOL.
Just do it. lol Action speak louder than words. I've seen plenty of videos from Jody and welding tips and tricks remove his so he can get better video of welds. No detriment to the weld. Jody knows a whole lot more than me.
I agree.
Depends on the wire. If you're using self shielding(most DIYer's use this) you don't need the nozzle at all. If you are using dual shield wire you require the nozzle to direct fas to the weld puddle.
Great vid! I'm looking into doing some flux core welding and didn't know this stuff existed.
Sal Esposito I hope you find it useful. Thanks for watching!
Great video, I've watched many welding tips and this is a worthwhile addition to the welding body of knowledge here on youtube. I will also remember your copper heat sink advice in answer to one of the earlier comments, thanks.
David Youtz thanks so much. I really appreciate knowing when someone gets something from this and takes a minute to share. It means a lot.
Use a fan to keep the smoke away from your face. Not so much a tip to make better welds, but you won't be sucking fumes.
Yes. I use a 3M masks witht he 2097 filters because are very easy to breath in, fit neatly inside most welding hoods, and well, they really filter out all that crap. Check it out www.reddit.com/r/Welding/comments/5rg570/3_or_4_weeks_of_grinding_mild_steel_and_welding/
I agree that fumes are a hazard . I prefer to use the fan blowing away from the weld as opposed to blowing towards the weld. The reason for this is it draws the fumes away and wind on both gas and gasless does play a part in he job at hand. Just my thoughts, cheers from John, Australia.
Gavriel Dorian I have an overhead fan I use when I welded here. I've moved to a shed and building a fume extractor is a priority. Thanks.
Thanks John. I like the idea of an extractor. I'd love a professional one, but that's not in the budget. I'm designing a DIY version.
Demo Rcr I have a 6in tube with a fan connected to pull fumes now, my new table (3 years old now) is 30 x 30 so down draft may be a little tough. I’d love to see your setup once you post it. Give me a heads up. 👍🏼
for flux core, in my personal experience, needs to be run a little hotter than you think and wire speed needs to be a little slower than you think. too much wire speed and you get spatter city. quality wire is also important. that horror freight wire is garbage. use it to tie up your bales and lash barb wire onto poles, but not for welding. flux core is a very similar process to stick welding. if the flux is poor quality or insufficent quantity, you will get bad welds.
Which ones are quality flux wire. Im running hobarts .35 and do get some spatter. But figure its prolly me 🤷🏽♂️
@@mobius-1503 I've had good luck with INE brand. Of course your results may vary. Part of preventing excessive splatter is also in good prep work for the joint. 0 splatter is near impossible. But with the right wire and settings you can get it down to minimal impact where all you need to clean up is a wire brush.
@@fakiirification thanks. Will do and will pick up a roll of INE and try it out
Great video mate thanks more welding tips God bless your family🙏😊 👇
I wish I knew about these tips earlier. Great tips. Thank you.
BensADV thanks. Glad they helped. 👊🏼
pam works good too.
Matt Collier good tip. May be the same thing.
Mig welding is probably thee best way to weld anything. Once u know what youre doing,.. sky is the limit
Free Lance MIG/Flux Core is the way to go if you don't want to bother with developing the skill to stick weld. MIG/Flux Core doesn't require much skill. A chimpanzee could just about MIG or Flux Core weld. Fact is, if those Flux Core welders weren't abundantly available & dirt cheap, AND "stick" welders were about all anyone could find to weld with, you'd definitely see a whole lot less "DIY" build or repair videos on KZhead that involved welding. Nither MIG or FluxCore are "the best way to weld", they're just "the easiest way to weld" with very little skill level.
I agree, the threshold to entry is very low with the low cost MIG welders and with a decent one, you can weld lots and lots of projects that previously would have been impossible. I'm not building skyscrapers or pipelines. I'm sticking two pieces of metal together so I can make a repair, or a stand or a table. Maybe some artwork.
I didn't know what a wire welder was till I was a teen. I learned on a stick and while I'm far from great I'm a much better welder because of it. MIG takes a lot less skill to weld, in turn ARC takes less than TIG. They all have their place where they have a better strong point but ARC and TIG will always be better than MIG. MIG is so popular because it's low learning curve not because it is better at anything.
neo 71665 Very true. If you learned stick welding first. Your ahead of the game. Stick welding in my opinion is the hardest. In welding school stick comes after torch welding. Then gmaw.
Great vid. editing and great tips. Made me realize I need more lighting..
Glad it helped. Thanks for taking a moment to a minute to comment.
nice job. simple and informative.
Thank you. 🙏🏼
Grinder & paint, makes me the welder I ain't.
Rudofaux exactly. Woodworking as well. Caulking and paint makes me the woodworker or carpenter I ain’t. 🤣
The bigger the gob, the better the job... (where have I heard these before, eh?)
good job my guy......uh if you don't have your polarity correct with flux core it will wear you out.
Trent james Great tip. I'm not going to ask how you know that. LOL
With out knowing it I ran a machine DCEP for over a yeah...Hey these things happen in my life.
Trent james sorry I just chuckled pretty hard. I haven't done that specifically, but yea these things happen in my life too.
love the video. i just got in to wielding again i use to mig weild 15 years ago and stop. and and now i just got a flux weilder , Awsome tips. keep up the videos..😊😊
ilokozBuilt thanks for taking a minute to comment. I really appreciate it.
Awsome video, very helpful, well spoken, clear and understandable, thanks
Thanks so much. Very kind of you. Glad it helped.
Would Vaseline not work for nozzle gel?
New Generation trcQTTRRRCCRCCRCTTTTTTTTTTTTTTTTTTTTTTTTTTTTTTTTTTTTTTTTTTTTTTTTTTTTTTTTTTTTTTTTTTTTTTRV
New Generation not sure.
😂doesn't weld for a living but it feels like a job to your family
Haha.
Emily Grosklags realated to him I’m guessing lol
Super great intro commercial with the kids and their antics. Great vlog, thanks for posting and sharing with us. You got a new subscriber and a high five.
Thanks. Glad you found it helpful.
Very helpful! Thanks!
I'm a woman, what is this cricket stuff you're talking about? Am I a man trapped in a woman's body? LOL I liked the video, thanks.
LED flashlights are your friends also
Danny Bailey they actually make one that attaches to the nozzle. I haven't tried that yet.
Thanks for the tip on the silver streak! I have nothing but trouble with soap stone especially when I am working at 1/64"!
I know that there are people who are fine with soapstone, but it just wouldn't work well for me.
Excellent video. Your humility will make you a master welder. Keep at it guy.
Dax Inventor thank you. I am still working at it.