Japan vs German Pliers (LINEMAN)? Knipex vs Vampliers, Fujita, Milwaukee, DeWalt, Channellock
Brands tested: Knipex, Vampliers, Channellock, Fujiya, Milwaukee, DeWalt, Doyle (Harbor Freight) GearWrench, Ideal, Southwire, Klein Tools, Wiha, Irwin, and Typhone East. Pliers tested for maximum gripping strength on a screw and socket extension. The pliers were also compared for performance cutting through copper wire, a 16-penny nail, and a deck screw. Finally, all of the pliers attempted to cut through a socket adapter. I always purchase all of the products tested to ensure unbiased testing. So, thank you for supporting the channel!
➡ Thank you very much for supporting the channel: / projectfarm
➡ An easy way to find past videos along with products tested: bit.ly/2FCrBpk A big thanks to Jim for putting this together.
➡ Merch: www.Project-Farm.com
➡ Click here if you'd like to subscribe: / @projectfarm
➡ As an Amazon Associate I earn from qualifying purchases.
➡ Products Tested In This Video (in no particular order):
Knipex: amzn.to/3xGHjFD
Channellock: amzn.to/37puuon
Vampliers: amzn.to/3CCfdPs
Fujiya: amzn.to/3AnKbsE
Milwaukee: amzn.to/3s0FQbH
DeWalt: amzn.to/3s0Ab5y
GearWrench: amzn.to/3yIXTWk
Ideal: amzn.to/3sdw0DL
Southwire: amzn.to/2TZtjZw
Klein Tools: amzn.to/3lE6dTO
Wiha: amzn.to/2X6y0SF
Irwin: amzn.to/2Vy2Um6
Typhone East: amzn.to/3jxGjOW
Videography Equipment:
Sony DSC-RX10 III Cyber-shot Digital Still Camera: amzn.to/2YdXvPw
Canon 70D Camera: amzn.to/31b5Gy0
Azden Microphone: amzn.to/34d3DLE
Go Pro Bundle: amzn.to/3Ca0ZVN
This video is only for entertainment purposes. If you rely on the information portrayed in this video, you assume the responsibility for the results. Project Farm LLC
Nowadays whenever I see a manufacturer's claim on the packaging, I can hear Todd's voice in my head saying "we're gonna test that".
I do this in my head when anyone claims anything about anything
Manufacturer claims "50 times greater power than the competition", we're gonna test that.
A drinking game to guarantee wobble
Now a days, when I read a manufacturer's claims, I come here looking for a video testing those claims....
(when a tool exceeds its claims) "very impressive!"
"We're gonna test that!" That phrase makes me smile.
Happy to hear that!
"We're gonna test that, too!" 🤩
On some products it straight up sounds like a threat. lol
Hahaha. I love it. I'm going to start using it at work.
I've been following this channel for years and it's amazing one of my favourite go to channels, and so happy to see even after 2 million subscribers, The people behind the channel are still humble and same dedication, honesty, curiosity that they've been for years, Nothing but respect and best wishes guys keep it up 👍
I appreciate that!
helpful as always, already own a set of channel lock pliers (various sizes) including the lineman. They never let me down, much like your test videos. Thanks for your outstanding work.
You are welcome!
Doyle: "Riveted joint for smooth action with no wobble" Todd: "The Doyle brand has a small amount of handle wobble..."
Thanks for sharing.
RiP Joey
Yeah, that's gonna be a big oof from me there chief!
the subtlest of roasts
Pretty impressed with basicly no wear on the Fujiya cutters after cutting the screw. That is a sign of a tool you invest once in and never need to buy a new one.
Yep, confirmed by it breaking earlier and not bending on the last test. Very hard steel.
Thanks for the feedback.
I would probably lose the good ones.
Yeah it seems they went all out on the hardness, makes sense because who in their right mind reefs on a pair of pliers until they break 😂
It would be definitely sought after at the job site as a “Can I borrow that for a second” Never to be seen again.
Always the best channel for stuff people actually use. You do a great job of making tests as objective as possible, within real-world limits and always address "hidden" features that may be a make or break.
Thanks!
I gotta say, I've been binging your videos for past 2-3 days! Very methodical and unbiased testing, and quite entertaining!
Thanks so much!
I've always been a hire-a-handyman guy. Being hit hard financially from the pandemic, I've been doing way more around the house/garage. These videos really help me figure out the best tools for the price and how to use them properly. I'm learning that buying cheap crap is exactly what you get and not worth it. I want the tools I buy now to last a while. Thank you Project Farm, subbed.
Thanks for watching and subscribing! You are welcome!
I would recommend looking at the top few tools for each type if you are going to use them a lot. Comfort and feel is a personal thing.
PF: "We're gonna test gripping strength and cutting power!" Electricians: "But what about pipe reeming and hammering?"
Yeah when I did bridge construction I used em yo beat shit more than cutters or pliers
Yes, "every tool is a hammer"!
@@KJohansson hammer and hammer with batteries
@@snafuequals I love my 18 volt Makita hammer 😆
@@snafuequals haha😅
I fascinated with all these videos, I'm a HVACR tradesman and have an interest in quality tools. These quick straight to the point tests are very well done! I'm sure much work is involved in editing these videos not to even mention the tests. Thank you for your hard work sir! Much appreciated!
Thanks and you are welcome!
Great video!...I truly appreciate all of your hard work that goes into delivering us all of these excellent videos and topics... keep up the great work....😁👍
Dang dude, you even went as far as exploring their point of failure! You have to be the kindest, mad scientist there is! And the world needs you! Bravo!!!
Thanks!
i'm rly impressed he broke all his pliers.. lol.. it's fantastic.
My failure point is always when they fail to cut wire before my hands cut them.
His parents should be congratulated.
Needs to let his hair grow out and go full Dr. Emmett "Doc" Brown.
I would love to see you test different Multi-tool pliers. This would be a bit difficult due to the wide variety of built in tools but a multi-tool show down would be amazing!!!
Great suggestion! I'll see what I can do
Great idea! The best pliers i've ever owned (and still do) is a multi tool made by Leatherman, same as the Dutch army uses
@@BinneReitsma The Dutch have an Army?
Would be an expensive test! A Leatherman Wave is $100 these days
I've carried almost every brand of multi tool, victorinox has been the best.
You did an outstanding job of showing us the strengths and weaknesses of a broad array of pliers/cutters. Thank you.
Thanks and you are welcome!
I just found this guy and I love that he’s all business and fast paced. Subbed.
Welcome! Thanks for watching and subscribing!
"Riveted joint for smooth action with no wobble" _"The Doyle brand has a small amount of handle wobble."_ YOU HAD ONE JOB!
Whatever, they're cheap, or used to be.
Thanks for watching!
Fantastic testing! I never heard of a few of those lineman's pliers brands. You made deciding which one to buy an easy task. Thank you
Wow
My personal preference is the Knipex brand, but I can take anyone that suits my purpose at the moment.
@@ehsnils Channel lock not bad for the money.
@@ProjectFarm have you done a spark plug comparison?? for mpg and durability ?
Anything knipex is worth the money in longevity and toughness
A suggestion: Many of your tests track two things at once. For example, cutting force/damage to cutter. You could use a double bar graph so we can check both things at a glance when comparing. Excellent work!
Thanks for the suggestion. Thanks!
Before finding this video, I had purchased the Vampliers. I had snapped an exhaust stud on my motorcycle and I needed something that would grip strong to back it out. They did the job with no effort. Since then they've become my go-to pliers and they never fail - incredible.
Thanks for sharing.
I absolutely love this channel. I’d like to see your catch-phrase used at a wedding! Her: “I promise to always love, cherish and honor you”. Him: *looks at the camera “We’re gonna test that!” :)
🤣
Snapped at 3 days without food.
"Riveted joint for no wobble"" Immediately followed by "Has a small amount of handle wobble" LOL
lol. I like the Doyle brand a lot but every pair of Doyle pliers I've purchased does have handle wobble.
@@ProjectFarm I have an awesome Video Suggestion: Gear oil test: Amsoil: SEVERE GEAR® 80W-90 Amsoil: SEVERE GEAR® 75W-90 Hotshot’s Secret: Blue Diamond S9 75w-90 Hotshot’s Secret: Adrenaline R9 75w-90 Lucas: 80w-90 Lucas: Synthetic 75w-90 Valvoline: High Performance 75w-90 Valvoline: SynPower 75w-90 Mobil1: Synthetic 75w-90 Royal Purple: Max Gear 75w-90 Red Line: Synthetic 75w-90 Thank you so much for everything you do! You do a fantastic job informing everyone on what is the best product.
A tiny amount of wobble isn't an issue if the shears are designed to be offering a straight cut when the wobble is absorbed under load. If the joint is sticky then it's making the tool a lot harder to work with.
@@ProjectFarm I got a good laugh at the Fujita pliers a tool that you can get the job done with and eat on your lunch break😂😂😂😂😂😂
This person has a perfect positive way of speaking, emotion to a minimum as well.
Thanks so much!
I’m always impressed with the devices you come up with to do your test.
Thanks!
Finally the pliers comparison video we deserve! We use them so much got cutting copper wire at our salvage yard so hope I see the ones we use! 🤟
Thank you! Fortunately, I did include cutting copper wire
@@ProjectFarm great video man! We use the Doyle pliers a lot and have found they are the easiest to exchange if something does happen but rarely do we need that warranty. I am a fan of the Vampliers though too 👌
I was one who recommended this and I’ve been patiently waiting for it. Honestly I’m not surprised Channellock did well. Most my common used had tools are Knipex, Channellock and Klein. As for lineman’s specifically I use Knipex and for the price I’m disappointed IMO they lost to Channellock but I’m glad a USA based tool company is still making quality tools. Great review keep them coming !
Thank you!
Likewise. I use klein and knipex bc they're usually the top dawgs in pliers. They also feel amazing in hand. Howeverz PF just proved on the last couple that channellocks outperform.
The irwin brand also are very inexpensive and did a very good job and both this video and the last diagonal cutting pliers video…
U only buy Knipex channellock or Klein hinged tools. They are all high quality but Tough to beat the channells for the price.
All the US and German pliers did well, and these tests don't expose the minute differences that you'll experience while holding them for hours a day. Linesman's pliers are colloquially called Kleins for a reason.
I own many different types of pliers- many are specialty items, but I probably have 50 that are within reach on my bench. Mostly Snap-On, but Vampliers are my GO TO for removing broken fasteners. They are made in several sizes, and are on my “must own” list. As the first test implied, their ability to remove broken fasteners is second to none- and I own left hand drill bit and every gizmo that has been made for this job… BEST WISHES TO EVERYONE!
Thanks for sharing!
I'd really love to see a tap and die comparison video. Thanks so much for these, keep up the great work!
Thanks, will do! Thanks for the video idea.
I was a franchised tool salesman for about 18 years. From what I’ve seen, it appears that many of the taps and dies are made by either Irwin or Vermont American, regardless of the name stamped into them. Either brand seem to hold up quite well.
@@jakeleibold2187 Thanks for your insight Jake! Appreciate it. :)
great video, wonder how tools made in the usa then later made in china would hold up to each other, vise grips for one,
MUSTIE!!
The welding clamp vice grip channel lock brand from China are way worse than the USA ones.
Eagle made in usa vs chinese Irwin
Sounds like a good idea for an interesting video!
Man, chinese vise grips are absolute trash. Theres really no comparison to the brand name ones.
One thing about the Vampliers, you can use them to take out flush mounted stripped screws, which I think is unique to them. It's saved me several times and they're also very tight and well made. Great video again PF!
I got a full set of them just for using as screw extractors, everything they do as pliers is just gravy for me. I can't bring myself to really abuse then tho
If you like those search for "engineer" brand pliers, the vampliers are just rebrand with large markups.
@@greentjmtl Wow, didn't know that. Wish I would've bought those and saved me the marketing wank money. Thanks!
Knipex have even better pliers for remove screws.Knipex TwinGrip.
They have saved me a bunch of times when trying to extract a stripped stainless steel bolt in a greasy hole in the depts of an industrial machine.
Again just Great. Please keep testing stuff. Thanks for all your work! Tom
Thanks, will do!
As always - awesome content! My Klein’s are getting old so this was a big help! Video Idea: portable workbenches would be awesome!
Thanks! Thanks for the video idea.
I love your grip and twist test! It’s well thought out and reflects a common real world application of this kind of pliers. Awesome job as usual! Actually, every single test was spot on! You applied a realistic grip of 100 lbs which reflects a grip someone strong can actually apply. You selected the most common electrical wire these pliers would be used on. You showed how well the cutting edge held up after each test, and you pushed them to failure to find their weak points and to serve as an accelerated cutting edge wear test. Your test methods are quantitative and repeatable with a little qualitative commentary mixed in as needed. This is the gold reference comparison.
Thanks for the awesome video, Todd! I bought some Channel-locks recently to replace another set of Channel-locks that grew legs and wandered off to see the world. Glad to see they measure up fairly well.
You are welcome!
@@ProjectFarm in
Love your tool testing videos! I'd love to see a video on self-leveling rotary lasers some day (if possible!)
Thanks! Thanks for the video idea.
My lineman pliers are my dad's Kline pliers from the early 1970s. He was an electrician and electrical technician and was a big believer in kline tools. Great video!
Thanks for sharing!
"From happy to snappy". I'm going to have to remember that one. Honestly, for $27 the Channelock is hard to beat.
and USA made always!
Seriously...reasonable price, good performance, and made in the US. Hard to wrong with their stuff
My thoughts exactly. Channellock tools are a great value and made in USA too
Thanks for the feedback.
Check out the Channellock 546 slip joint, for some reason Channellock makes them hard to find but mechanics will tell you it's their most often go to tool.
Would love to see best nitrile gloves or best shop soap (lava/orange)
Stoko. Best hand soap. You're welcome.
Best soap is grip clean for sure But would love these
Thanks for the video idea.
Love your videos! Super in dept and well thought out, very informative too. Keep doing what you're doing! Should do a video on best wire strippers
Thanks, will do! Thanks for the video idea.
Thx a lot for this very complete & well conducted benchmark !!
You are welcome!
I have always loved your videos but my favorite part is how you come up with the testing methods and provide a graph. Infotainment is underrated and deserves more support. In my shop I have used Dewalt pliers for many years cutting copper wire was the hardest use it ever saw and a few years ago I bought a set of Doyle pliers from Habor Freight to keep in my handyman travel bag. I got to say I have been impressed with the quality of this new Harbor Freight tool line.
Thanks for sharing.
As a suggestion, you could continue the "gas vs battery" with different brands of battery weedeaters vs a gas one. I would also love to see some additional hand tool comparisons like this: sockets, rachets, wrenches, etc. Love what you do.
Great suggestion! Thank you.
L. Ion batteries suck as far as I'm concerned. I went back to a corded weed whacker. Now a cordless DeWalt tool is much better quality and does last longer but they too die in the end and are horribly expensive to replace. Give me a cord any day of the week, they never die.
@@getin3949 sounds like you dont really need cordless
There is no comparison. It's dumb to compare gas appliances to battery powered appliances. They greatly suffer under run time.
@@getin3949 enjoy spending 3x as much time wrangling the cord as you do trimming. I loaned out my 60v powerworks for the season and for shits and giggle bought a wild badger 2 stroke 26cc weed eater. its great. it starts in 2-4 pulls isn't too loud and the vibration isn't bad either.
Another great test vid from Project Farm...not surprised to see the Channellock linesman's kicking butt and taking names...used Klein's for years, then tried the Channellock's...been in all 3 of my toolbags since...
Thanks! Thanks for the feedback.
It’s amazing, you’d think that companies would do these kinds of tests to their own products and see, “Wow our products really kinda suck” and improve. Excellent information. I’ve made several buying decisions with the help of your in depth videos. I hope you and your family are doing well. I would love a video on testing different types of car washes, or drying towels. Thank you!
The companies do testing. All those pliers are capable to do what they are designed for and that's not cutting through massive hardened steel. So anything beyond cutting that nail is more or less for entertainment not for a real life use case comparison.
How many humans do you know who can squeeze pliers with 300 pounds of force? This video is purely for entertainment and would be laughed at by anyone who actually works for a living.
Vampliers are amazing at gripping and twisting rusty fasteners. I call them the "Scotty Kilmer pliers" 👍😁
Yep, that's what they're made for... beyond that, they're OK. A tool for a specific job, that can do a few others in a pinch.
I thought they did the best as well on this video.. But im a Dewalt kinda guy. But if ima get some pliers I'll get these.
That's true I was planning on getting a vamplaier so I kept my eyes on it but decided to get a channellock instead.
Hi Evan i think Japanese stuff hold up like nothing else does, i have used Japanese tools from the 80s and 90s and they still work perfectly fine.
Now I know why I've bought the Channellocks for over 40 years; best bang for the buck. I don't buy Chinese no matter what name is on the label if I don't have to, I support the US people and MFGs every chance I get. It's why I buy DeWalt power tools over Millwaukee, and Channellocks over anyone else.
Perfect timing. I'm a Channellock fan. Used to love Irwin back in the early 80's.
Thanks! Thanks for sharing.
Great Channel, keep doing it. I always love to watch the comparisons.
Thanks, will do!
Your tests are the most thorough I've seen over the years. Many tools I purchase are based on your reviews and have not been disappointed yet. Would like to see battery operated sprayers for weeds and gardening.
There’s nothing I hate more than the cutting blades on my pliers getting all boogered up! I’ll be referencing this video next time I buy a new pair. Thanks Todd!
I don't think the testing methodology is necessarily an endorsement. It's meant to be a relative strength comparison. None of these are good cutters, and they weren't meant to be. They're multi use pliers for cutting of soft or medium hardness materials only.
Tax Man: "Mr Farm, you're writing of a dozen pairs of pliers." Project Farm: "Yes sir." TM: "...As a business expense?" PF: "Yes sir." TM: "You mind explaining that to me?" PF: "Can I?! Hold on, I've got spread sheets!"
TM: "...As a business expense?" PF: Yes sir!" TM: "We're gonna test that!"
Haha
@@Joseph_C759 🤦🏻♂️😅🤣👍🏼
Tm: as a business expense? Pf: yes sir. Tm: mind explaining that? Pf: *shows tm the channel* Tm: I see, ok thank you have a nice day.
Excellent video... speedy and concise demonstration. I watched the whole video, because you didn't dwaddle like so many others do. Thanks!
Thanks and you are welcome!
Good job! Thanks for doing those tests
Thanks and you are welcome!
There’s nothing like being on vacation in the Dominican Republic while I’m watching this clip and drinking a pina colada by the beach…………Hah, life is good.
Andy wins the internet today
😬👍
Thank you!
And then ordering up your Knipex plier set once back in your hotel room.
You should be a shame of your self ... :) I wish I was there ..enjoy
I’d love to see his entire shop. The amount of tools and machines would probably induce major envy.
Also the amount of broken tools in the junk bin...
I'm afraid that all is cracked and broken. Because only then you know how good it was LOL.
He gives the tested and still working tools to charity in his area. He doesn't keep it all.
Great video, very informative. Thanks for the efforts.
You are welcome!
Thank you sir for this video. Very helpful to decide which to buy a good plier.
Thanks and you are welcome! Glad to hear!
@@ProjectFarm mc Klein 👍
Timestamps for Graphs 5:41 Gripping Strength on Socket Extension 5:47 Weight 7:44 Gripping Strength on Screw 9:24 Force to Cut Copper Wire 9:48 Leverage of Cutters 11:13 Force to cut 16 penny nail 13:08 Force required to cut Exterior Screw 15:30 Failure Load
Thanks for sharing.
@@ProjectFarm Suggestion for graphs when items are cut - add a 2nd color graphed line to show how much damage the cutter knife had. This gives context to the amount of force used to cut the bolt or wire.
@@ProjectFarm What in tests kept vampire out of mention in top. They seemed to do very well and price at $45 is higher than Doyle but way lower than Fujiyama. In just about every category they were in top 3, except cutting. In which case I suspect they need to be sharpened or in my case I'd get out Dremel. The big thing is they grip and are hard to break. They are near three times as tough as channel lock, btw. IMHO, Vampire made the grade. Doyle at $18 is super value. Doyle is what I own. If money was not issue, I'd pick up Vampire as I often find situation where I need their clamp force to twist/turn something loose.
UNIOR is not on the list 🙂
I'm glad to see the Vampliers did so well. I've been planning to buy one, and this had sealed the deal.
Vampliers are totally worth it. They grip like nothing else I’ve ever used, and they hold up for many years.
Should I buy them just for the name? I already have more pliers than I need for my lifetime...
Project Farm helps so much on tool purchases . Thanks a lot
You are welcome!
Great video ! It matches my own experiences , would like to have a wear/damage comparison chart. I pull a lot of 1/4" steel rivets and the rivet pullers are expensive and always falling apart , the jaws will deform and require running a drill bit through them every 2-3 rivets . I would really love to see a under $200 Rivet puller test for 1/4" and possibly 5/16" steel rivets . Keep up the good work .
Thanks, will do! Thanks for the suggestions.
I lost it when you said “went from happy to snappy”, that made my Sunday. Thanks for the great tests and content!
The product testing is great, but the subtle humor is amazing!
what did you lose?
That was my favorite comment too! I snorked
Can you test multitools like Leatherman, Victorinox and Gerber for us?
A multitool test would be awesome. I spent close to $1000 before figuring out which I prefer (leatherman surge). I have carried a multitool everyday for around 7 years.
Great suggestion! I'll do it, and I'll test each of the brands you've requested and more. I publish the video within the next 3 months
If Leatherman doesn't come out on top of that test I'd eat my hat. Well.. Maybe a leatherman from before 2000...
@@ProjectFarm Thank you so much for all you do. It is extraordinarily valuable, and we all very much appreciate your work!
@@fen4554 haha same here, best multitool ever!
Awesome Video! I I don't know ion you have done a video on watching screwdrivers but I think that would be an awesome video. Most of the heads to head videos is moistly objective. I like how when you think of ways on how to test a tool to its max. Keep up the awesome work.
Thanks, will do! Thanks for the suggestion.
We loved your video and chart results presentation, please continue your professional evaluations. We support your work
Thanks, will do!
testing different allen key brands would be good, i hate having them round over through use
Great idea!
We use Wera L keys when bolts starts to round. Cant go wrong with the hex plus
Every professional I've heard from says Bondhus, I picked up a pair and they feel great, I haven't had much use time with them yet.
its always the silver ones which round for me lol
Since you seem to be on a hand tool binge, may I suggest brands of screwdrivers? Slotted Drivers get used pretty universally as pry bars, scrapers, chisels, and of course slotted screwdrivers. I'd like to see how the different brands stack up in torture tests.
This
Wera for the win
I still go with Craftsman for flathead screwdrivers because every time I break one using it as a chisel or pry bar, I just get a new one for free.
Darn, you beat me to it.
Nepros are far and above the best screwdrivers
this video was recommended to me at random and i stayed watching it because i had nothing better to do. Didnt expect much from this video but i learned alot from this one like way more then one would assume from clicking on random video. kudos got my sub will be watching more stuff from you
Thanks! Thanks for watching and subscribing!
Thanks so much for your videos. Just happened to need linesman pliers and I’ll buy the channel locks. 👍
You are welcome! Thanks for sharing.
Another interesting, informative video. Seems like the Fujiya has the most durable jaws which, to me, would be most important. Love to see you do a test of the top brands where you make like 50-100 cuts through the romex or nail and see which blades hold up as this seems the most typical use case. You could base results on both visual inspection and increase in required force from first to last cut.
Thanks! Thanks for the suggestion.
100% would like to see how they hold up to at least 50 cuts! This would be the most useful test possible for these tools. I don't envy him having to film that tho. 😂
I agree, one screw cut and most of those were trash, I hate having to use a different part of the cutter because it is damaged I always buy another at the first opportunity.
Personally I'd say force required to cut is the most important for me, so long as they' have reasonable durability. I'd rather put less load on my hands and replace it more often than have it last longer. The Fujiya seem great though, as the force is low as well as being durable.
@@lost4468yt I wonder if they make a long handled version
Never imagined I'd love a pair of pliers like I do my Engineer Nejisaurus (Vampliers if you're American). Only thing is once you buy a single Japanese tool it becomes an obsession, the difference in quality is instantly apparent as soon as you hold them
I bought the JDM vampliers, while I don't use them like an electrician would, I find that they are the gripiest set of plyers I've ever had.
yep. i came across nepros brand by KTC. its ratchet wrench makes snap on look like chinesium ratchet wrench. the build quality of Japanese tools is truly equal to none. plus Nepros is cheaper than snap on. lol
@@lordjaashin Yeah saw AvE rAvEing about them, that's as close to porn as youtube allows. Oh to be rich...
@@chiefo7631 didn't knew that AvE rave about Japanese tools. i avoid watching his videos because i can't stand the way he talks
@@lordjaashin lol yeah he does a good 5 mins on the exact tool you're talking about, worth a watch even if ya have to mute it!
As always, very nicely done. Thank you!
Thanks and you are welcome!
Congrats on 2 mil! You deserve it!
Thanks!
Project Farm has a new video out? We're gonna watch that!
Thank you very much!
A suggestion for videos, time stamps for the results. I often go back to old videos and I find myself scrubbing along to find the graphs. If you put timestamps on the video it would be pretty convenient. Thanks a bunch! This is still one of the best channels on YT.
Thanks! Thanks for the suggestion.
I switched a lot of my tools to knipex and have really been impressed with them. The warranty is amazing, some of my guys have sent some very miss used and abused tools back and they always replace them without question. They’re not cheap but you only ever have to buy them once as long as you don’t lose them.
Thanks for the feedback.
@@htr5372 where have you had issues returning Knipex items? At the dealer I use I’ve seriously turned in some tools that obviously should not have been used the way they were and haven’t ever had any resistance on replacement. Not even by me but guys on my crew, they replace them without question every single time. Maybe it’s different with different dealers or areas?
@@htr5372 ah, okay. I always go through a second party but I figured they’re just sending them back to the manufacturer anyways if they’re letting me return them so easily. They never want to take back my Kleins for some reason, I have to go through a different place for that. Maybe I’ll just start sending them directly to Klein.
Todd, love all your videos. I was looking to get some new needle nose pliers and I turned to your page to see what you recommend and did not see a video for them. I would love to see your tests on 6-8 inch needle nose pliers.
I've always been a huge fan of Fujiya, and vampliers. Glad to see them do well.
the vampliers were around for decades, they were called "engineer brand pliers" and were imported from Japan
I like the Made in USA of the Channelocks. That is apparently what I will be buying from now on.
In my 20 years as an electrician, I started with Klein, but then switched to Channellock. They are all I buy now. Lasts for years and made 30 minutes from me.
I just purchased a DeWalt battery powered lawn mower. Not as impressed as I thought I would be. I honestly would have waited until ProjectFarm came out with a comprehensive review of the available battery powered lawn mowers in the market. A las I couldn’t wait any longer since my wife and I just purchased our first home and don’t want to be regarded as the neighbors that don’t keep up their lawns. That is why I am pleading that ProjectFarm help us homeowners by posting such a review as soon as possible. Thank you for all your hard work and honesty. You are a KZhead tool reviewer I trust and regard highly. Keep it going!!!
Thanks, will do! Thanks for the suggestion.
@@ProjectFarm Just placed an order for some of your merchandise. Going to happily stick that Project Farm bumper sticker to my service truck!
Follow-up, I ended up purchasing the EGO 21” Inch Select Cut XP Cordless Lawn Mower. The difference is quality of build and self-propel feature against the DeWalt are incomparable. EGO really does dominate the lawn care market in terms of battery powered tools. I already have the snowblower and that machine works well too. Should have shelled out the extra cash from the get go. Lesson learned.
I Love this channel!! Always informative and great content everytime!
I appreciate that! Thanks!
I've actually always had really good luck with Channel Lock tools. The fact that they seem to be pretty well built and engineered along with the fact they're made in the USA sealed the deal for me. Your videos have only served to further convince me that as I buy new tools that they are a first choice purchase and to go to tool. Thank you for all of the hard work you put into these.
You are welcome!
Love your reviews. I would also enjoy a video expanding upon the “10 must have tools for the shop.”
Great idea! Thank you!
THIS
Maybe for hand tools and another for power and/or shop tools....? 🤔
@@ProjectFarm yes, let's have that ten tools list PF.
You are a true tool nerd! Excellent job! I’m going to buy the Doyle. I usually stay away from HF anything but I need a decent pair of linesman pliers soon. Thanks
Thank you very much!
I enjoy your tool comparison videos for a while now. However, in most cases it comes down to personal comfort when I select a tool. As in case of adjustable wrenches, hammes, or side-cut pliers. It's nice to know the weak points of these tools. But as most tradesmen, I do not stress my tools to limit of failure. For me, it comes down to comfort, reliability and finish. As a master plumber, Channellock is my preferred brand of pliers and adjustable wrenches (black Spain), Husky - diamond tip screwdrivers and socket stuff, Ridgid pipe tools and sewer equipment, Milwaukee cordled and 12v. Makita (spline) never disappointed in the chipping hammer category and Bosch SDS has been amazing for me. I do benefit from your wearable item content such as drill bits and cut blades. I highly regard your practical testing setups & objective reviews. Keep up the good work! 👌
Really becoming a fan of Channellock with the couple of products I own. Decent price for relatively high quality and US made.
This 100 times over.
Agree, Channellock tools have been a good choice and good value for the money for a long time. I'm still using a pair of their #420 arc joint pliers I bought over 40 years ago, they won't quit.
Channelock is one of those companies that just doesn’t make any junk, like 3M
Thanks for sharing.
I'm happy to see the American made tools holding up so well. To be fair, a new rivet will make the Milwaukee and Knipex pliers usable again, if only for light duty jobs.
Thanks for the feedback.
If you think about it, the rivets are like mechanical fuses. If the rivets held on longer, the pliers would have failed in a similar fashion to those that didn't pop the rivet.
since I don't plan on cutting through a socket extension I bought the Channellocks based on this review. they are working great
Thanks for sharing.
Project Farm always has the most thorough, scientific, easy to replicate, and informative testing I have ever seen
Thanks!
Anyone else watching these hoping their brand at least beats what they always hear is the best because it costs more? Channellocks are my go to
Channies are great, all their products are quality and good designs and reasonably priced
I have a lot of Channellock pliers. It's my "good" set. Are they the best? No. They're good enough for what I do though. Their linesmans did better than I thought they would here. But I don't have the model that was tested. I have old big rivet ones and one pair of box joint ones. They're model 349
it would strike in the heart if someone bought some snap ons for silly money and then they get beat by alot of other brands
Channellocks make nice tools and I consider them amongst the highest quality. Also nice they are made in the USA which makes them attractive to me as well.
I have a variety Channellocks, a few Knipex , a number of 40- 50 year old USA Cratfsman from my early days and a handful of others. One of those others are Vamplier "screw extraction" pliers. For that specific use, they are outstanding. But, generally, I am grabbing the Channellocks first.
Love these comparisons. Nobody does it better. Makes me feel sad for the rest. A while back,I bought Vamplier "screw extraction" pliers. I ended up using them for something I hadn't expected. Had a screw embedded in a tire. Couldn't get it out to save my life until I remembered the Vampliers. With the Vampliers it was fairly easy.
Thank you!
Have had me channel locks since 04 and always been a must in the tool belt
Thanks for the feedback.
Keep up the great work!!!
Channel lock has always been a favorite. This test was very gripping 😁
lol Thanks for sharing.
The Japanese take a product and perfect it, while the Chinese take a product and make it as cheap as possible.
@tim is _EXACTLY_ right. I'm buying the Channelocks.
that should read "the Chinese take a product and make it as cheap and nasty as possible..".....😀
People should start paying extra for quality. Instead of cheaping out for Chinese product. This means stop shopping at Walmart and support smaller local businesses, American made products, etc. Stop shopping at Walmart and Amazon.
Or rather, the Chinese take a product and build it to the price point offered by the Japanese or Western company that contracted them to make the product.
They make it identical until u use it *CRRRAACKKKK*
What an effort you have taken to make a detailed video. Thank you
You are welcome!
As a lineman this showed me I’ve owned middle of the road Klein’s for years. Maybe I’m just hard headed and stuck in my ways but no other brand feels a good in my hand. That being said I’ll stick to my brand but may use another brand to try out at home. Also you should have included a test to see which brand lineman pliers is the best hammer. Thanks for the awesome content!
You are welcome! Thanks for the suggestion.
Funny! A lot of guys use them to hammer connections. Just yesterday i was using vicegrips to hammer a cheap screwdriver to lock conduit nuts..Lol. I probably have 200 assorted Hammers.
Another great video. I'm a professional electrician and have used klien pliers for 30 years and have tried ideal and channellock. A very common task as an electrician is twisting wires together, wider jaws make the job easier. Klien has nice, wide jaws where channellocks are quite narrow. Also Kliens have a lifetime, no questions asked replacement guarantee
Thanks! Thanks for the feedback.
Yeah, I've never known an electrician to carry anything _but_ Klein's. It is the stadard by which all other pliers are measured. At least here in the U.S.
Wedding: Pastor: To be together in illness and in health. Project farm: We are going to test that
Channellock are defiantly my go to work pliers for work! Nice work! Pipe wrenches next please! :)
its ok
Have to admit I'm surprised by the results of your testing. Thank you!
Our pleasure!