How to Make Table Saw and Work Carts
2017 ж. 26 Қыр.
276 235 Рет қаралды
This is how I made two wheeled carts, one for my new table saw and one to act as an outfeed table or workbench. They were cheap and easy to build.
Free Plans:
www.Makify.com/stuff/Saw_and_W...
Supplies & Tools:
Six 2x4s
One quarter sheet 3/4" plywood
One quarter sheet 1/2" plywood
2 1/2" screws - amzn.to/2k0O84h
Locking casters 2" - amzn.to/2xCQevO
Rockwell circular saw - amzn.to/2vHfvUs
Speed square - amzn.to/2xDplaW
Table Saw - amzn.to/2xI7sbC
Drill/driver - amzn.to/2x8C5Ub
Countersink set - amzn.to/2xDbmlr
Music by Joakim Karud / joakimkarud
Makify2 - / makify2
Patreon - / makify
Etsy Shop - Makify.etsy.com
Twitter - / makify1
Website - Makify.com
I love how a table saw is not needed for building a table saw table. Brilliant!
Excellent design. Simple and strong .
Awesome! This is simple, easy and cheap. Most other videos on KZhead have people making carts with hundreds of dollars in tools: miter saws, planers, complex joints, huge workbenches to lay the material on, etc...
Great video! I wish the PDF link still worked. Thank you for sharing.
Using the box as an outfeed table is just perfect!!
Inexpensive, practical, and versatile, I love it. I'll definitely be basing my plans off of yours. Thanks for sharing!
Great and simple design. The only modification I'll make is the height for my Makita is 12" between the 2 tables. Also with 16' lengths of 2"X4", three lengths will do all the frames and legs.
I made this set using your plans. I absolutely love them! I made them to match the height of my existing workbench. Thanks for posting the free plans. Great job!!
I love you using your table saw on the floor, next to the new box, to make a cart for the saw. 😄
Love your outfeed table. Great use of a Dewalt box. Seriously love the easy build. I will use it because of lack of space in my shop. Thanks.
Your video editing is to be commended. Succinct. Clear. And easy to follow. Well done.
Excellent use of high speed video. It shows everything and doesn’t waste time. These are strong, quick to make, and functional.
Great build. Simple enough for just about anyone yet fully functional. A+
I built this with different dimensions to suit my table saw and workbench, but kept the basic design the same. It's great and just what I needed! I love the bloopers at the end, too! :-)
Love the metric conversions, thank you!
Love the video. I have made 3 of these now. modified the height and length as needed for my table saw, router table, and miter saw.
Great build!! Strong, sturdy and simple stand.... This is what I need for my"new" 13" Delta planer I just got. Thanks 👍!!
Vinney - this is exactly the type of easy, inexpensive table saw stand I was looking for. I would love to see your design and build for similar tables for a miter saw and a band saw (if you’re looking for new video ideas!).
Exactly what I needed. Thank you sir
I like the animated illustrations highlighting the legs & tops. Very simple and efficient design. I have bought a similar saw and will use your design. Thanks
I really enjoyed all of the outtakes at the end of your post! Very informative, great job!
This is EXACTLY what I need: a mobile table for a new saw without a stand. I figured I could find plans on KZhead for a simple, inexpensive but sturdy DIY table, and this fits the bill perfectly. I'll only make the small cart because it's all I need. It's so simple that even a newbie like me should be able to make it in a single day. You could use it for a drill press, tabletop router, or just about any stationary power tool. Thank you, and keep up the good work.
I just put the small cart together for the same table saw. Very happy with it, my shop vac even fits inside :-) thanks for the inspiration Vinnie!
you're so lucky to get awesome table saw as a gift...thanks for your hardwork..time...knowledge to make us be a better woodworker
Wow, thanks! I appreciate the kind words.
omg, this is exactly what I was looking for. I already have a huge workbench and I needed this kind of design to use for my DW745. I'm gonna make these asap. but i'm gonna attach the two tables together and only use 6 castors iso 8. Thanks so much for sharing this :)
Bought my Craftsman table saw--this was exactly what I needed ! Simple and fast ! Adjusted leg size for my larger casters.🙂
You made a great video. I followed your super easy instructions and made a cart for my mobile saw this after noon! It was amazingly simple.
Good job, congratulations from Brazil
I just finished the smaller box, cutting all 2x4's to 23-1/2 inches. Need to put on a topper and bottom and wheels, but I love your plan and how detailed the PDF cut instructions are - love it, and love your videos!
Brilliant. Just what I was thinking of doing too for my as-yet-to-be-purchased table saw. Thank you!
Very simple design Just the way I LOVE IT!! Great video thank you for sharing!
Love the out-takes!
Just made this table. Simply perfect. Used three screws on corners. This thing is solid. Also used a square to set the legs to ensure 90 degrees and it eliminated the wobble even before fixing the bottom plywood.
Thanks for the free plans! This is just what I needed.
Just ordered this table saw! Gonna build one of these carts!
A couple days ago I commented below on how I'd like to make one of these tables. Well, I was so impressed with what I learned from the video that I went out that day to buy the materials I needed, and this afternoon I built it all by myself (about 4 hours total). I'm a small woman and I was able to do it without hollering for my wife to come help. Its simplicity and ease of building was nothing short of amazing, it's practical usefulness more than I expected by a country mile. I made a couple of modifications: I chose not to use wheels because I intend for the table saw to be essentially stationary; instead of having it sit on a plywood base, I decided to use the plywood (actually MDF) as a shelf resting on the 2x4 bracing. It's incredibly sturdy. It's not pretty, but it's a tool! Who cares about pretty? As long as it's square and plumb, that's all that matters. Thank you again for posting this video and offering the free plans. You are a star when it comes to designing and building simple and useful projects not needing $2,000 tools. Your projects are a novice's dream! Keep up the great work!
Best project video I have seen yet!!!!!!
I just ordered the table saw! It was sold out for close to a month then popped up for $279 at HD. These carts will be perfect for my small garage space.
Great video 👍. Simple strong and cheap. Love it
Thank you for sharing your plans. Very kind.
Simple! Does the job! 👍
I completed my cart, it turned out nice!
Great video! I have a HFT Hercules saw I need to build something for. I like the idea of two independent carts.
Everything I was looking at to make was too complex. This is perfect. Thanks!
Totally agree. Beginner-friendly. Thank you!
I really like how you did the numbers on each piece of wood AND the dimensions 👍 First video I watch and I'm now a subscriber ▶️ Thanks for the outtakes as well 🤣
Great design! The only modification I made was to make the top about 18" wider on the right side; it gives me a place to put stuff (rip fence, safety guards, various setup tools) while I'm using the saw.
Awesome little table saw
Your instructions are appreciated. A novice needs all the help he can get.
Was looking for nice and simple to do. Thanks for the video. This is my next project because so far I've been having to use my table saw on the floor. Will be safer to put it at waist level with an outfeed. An improvement could be making some latches that will secure them together to avoid the outfeed from moving away when cutting larger pieces.
Bravo, excellent vid. Thanks for sharing your awesome build with us.
This will be perfect for my situation! Simple and inexpensive. Thanks.
Great video and great graphics ! Very helpful.
Fantastic plan & right to point with all info! Loved it, right on thank you so much 😊
I have the same table saw on MY garage floor, so I'm gonna make these too! Thank you!
Thank you so much for this wonderful video! As a 51 year old female who’s just getting into woodworking, this is the most doable cart making video that I’ve found. I just bought a new Dewalt miter saw and have nothing to put it on. Your video and instructions are great and I love the way you show close up video so that I can see what you’re doing. Congratulations on your new saw. That one is on my wish list. Keep the videos coming. New subscriber here!
Thanks for the kind words and for subscribing. I appreciate it! Good luck with the miter saw. I don't have one but I hear that they are quite handy to have.
I think I will make one for my miter saw. This looks easy to follow. It will be my first wood project. TY
Easy and nice clear presentation.
Perfect....thank u for a great simple video. 👍👍👍
Dude love it , not also that, I love the way you put the dimension . It's really easy to follow. 3 thumbs up.👍👍👍
love your vids. its good to see you enjoying the new shop and getting new tools for the new space.
Thanks! The new shop is definitely an upgrade.
You did a very nice job. I have the same table saw. And I love it. Keep up the good work
Thanks! I made these and they are great. Easy to build and very handy.
Súper awesome dude, I loved this video because of the way you explained things.
Simple and functional. I love it. And using screws and no glue will allow it to be broken down later (when I build that super saw cart I don’t have time to build now.)
Love this video I just bought a table saw and this is exactly what I need..thanks
This build is perfect for my small shop 👍
Love the bloopers at the end!
Great. Simple and strong.
Yeah, solid looking carts and you have great video presenting skills - especially the shaded diagram graphics/ Well done
Great video nice & simple to follow instructions nothing too technical straightforward 👍
Grest vid. Well shot, great audio instructions and pic inserts. Keep up the great work. Nice out takes too at the end, good to see.
Used your video and plans last weekend to make a cart for my new tablesaw. Only had two issues: from originally watching this video until standing in Lowe’s with the parts list was about 1 weeks time. In that time I forgot you’d built two carts. I only needed to build one. I blindly bought everything on the parts list. Only realized I had twice as many 2x4s as I needed when I got home and started unloading . Second thing, I was trying to match my overall height of my cart + saw to an existing workbench. Came up about 1/4 inch short. Plan is to grab a 2 foot by 2 foot piece of 1/4 plywood today and slap it on top. So a couple goofs on my part but ended up with a solid little cart. Thanks for helping me kickoff my first project.
I'm glad it worked out in the end! Thanks for the comment.
Great job! I made a similar one earlier this week for my miter saw. Only problem I have is that using 2x4's really makes the cart heavy but I guess it needs to be so that it remains sturdy. Thanks for the post.
Thanks for making this video. I made one similar although a lot shorter to match a 29" folding table.
Good explanation & documentation!
Your facial expressions when driving in the screws is amusing! Great demonstration video!
Thanks. easiest DIY I've seen.
Thanks! -- built the short one for my daughter's Dewalt 7485 saw; expanded the top a bit to 22" x 26.5" so that I was able to feed four BOLTS up from underneath and through the cart top, into the feet of the saw. (FYI: those hold-down bolts are METRIC M8x1.25, 45-50mm -- and nowhere do they give that info in the Dewalt instructions!)
Fantastic video. Thank you.
Got the plans in this week. Simple but a great mobile stand
Just right for my DeWalt saw too. Brilliant!
Making this tomorrow first thing in the morning !!
Nicely detailed!
Made mine exactly the same, thanks for the video....
This project I have also before me ... Great instruction! Greeting MrHandwerk
This is a well made video. No time wasting. Thank you. ]
Simple effective, strong and certainly pleasant to look at tables...
Great Video mate. I love seeing diyers/youtubers starting out with barely a pot to piss in so to speak and coming out with decent usable home projects at the end of it. And trying out their own style of youtube channel along the way. We all had to start somewhere and its great seeing results with very basic tools.
Very nicely done.
Simple but effective. Thank you.
Great project. I am considering a new DWE7485 compact 8 1/4 table saw with no stand because the stands prove to be pretty unstable. It will replace my old 1951 Cast Iron Craftsman. This cart is just what I need for the new saw. And I love the idea of the outfeed table/cart as well. Since I have the BoraMate castors from the base I built for the old craftsman, I will use them for this cart. I would definitely recommend them or something similar over regular locking castors. My BoraMates were spendy at $50 per set they were needed for the heavy old craftsman. And when you set them down they STAY! Great video. Subbed you! Looking forward to seeing some more of your stuff.
Nice job great place for a dust deputy cyclone
Great plans, thank you.
Great job man!
Thanks for showing an easy, but perfectly adequate way to make tool stands. A lot of videos here show fully jointed stands that take hours to make, and to be honest, it's unnecessary. My bandsaw is a trade model, so weighs in heavy, but has been perfectly secure on a similar design, albeit with a bit of glue for extra strength. Rather than bolt the castors directly onto the bandsaw table's base I constructed a mdf dolly from 2 x 18mm mdf, with a removable frame on top that the table locates within. I can then borrow the dolly to (occasionally) move heavy stuff round my barn.
Dude this was exactly what I was looking for. Inexpensive, quick to build, nothing fancy. I know what the 10-year-old and I are doing this weekend....
Great video, many thanks. I have one comment though (sorry)- when you push wide pieces of sheet goods through the table saw using a push stick, keep it closer to the blade. If you push on the other side of the sheet it will tend to rotate towards the blade and if you ever do that when for whatever reason you have the riving knife removed, you will learn all about kickback! Stay safe and keep right on making good videos please.
Yes to this good lord I'm surprised that you've been lucky so far
Great video! I have a Milwaukee m18 saw made the legs 16 inches and with the plywood it worked to where I can use my folding tables as the extra tables thank you soo Much
super! Very different approach to the workbench design and it will do the job with a way smaller effort than many differrent constructions :)
You are so productive :( . I wish I had a friend like you man my friends are slackers. Hahaha Im a tattoo artist and printmaker. This channel works wonders