White tire wall: www.ebay.com/itm/18-thin-15-WI...
Пікірлер
Link to the white tire wall in description!
@robinhakenrudedvardsen58166 жыл бұрын
Nordic Rider thanks bro ride safe
@samehsouissi69866 жыл бұрын
Nordic Rider is it normal spray paint or car paint?
@baruter896 жыл бұрын
They are dangerous as fuck ! Tire can jump of the wheel
@Scruff4046 жыл бұрын
må man søke til bt for å bygge om til bobber?
@joachimm36176 жыл бұрын
Swen Sterckx I assume you're referring to the white wall inserts he used? Those inserts are designe to run on the wheel without causing interference man. The manufacturer knows what they are building and the dangers associated with something like their insert. the pressure on the wheel from the tire is so immense that once its inflated you couldn't pull it out if you tried. Also considering the fact that hes running spoked wheels that means hes running an innertube which means the tube would increase the density/amount of material that would be putting pressure against the rim pinning the insert in that much more. You should try them. They look amazing and are a very cost effective way to achieve the white wall look. It won't even cause the wheel to be out of balance.
@johndavis75696 жыл бұрын
man i love that you did this . it gives me the confidence to try it myself sick
@sonyplayboy25 жыл бұрын
Fantastic build. Super simple and it looks great! I've never seen anyone slap whitewalls on tires before.
@Keith_ballsack6 жыл бұрын
I love to watch things like this it takes me right back to the 70s when I was a kid and thought nothing of stripping down my bike engine in a morning in cold rainy old London...nice job...like the ride.
@paulcowell75884 жыл бұрын
Sehr schöner Umbau 👌👏😊
@peterring57225 жыл бұрын
looks great mate,nice job
@kingnidge95417 жыл бұрын
It turned out way cooler even though it's only 125. Greetings from Finland!
@jamimakinen31406 жыл бұрын
Nice job, I like the fact that the frame does not have to be cut, and you get to keep the original rear shocks.
@neilyakuza65955 жыл бұрын
I like how you kept the rear shocks and didn't just hardtail the back. Damn pot holes and bumps in Europe are enough to shatter your balls riding hardtail lol. Awesome work man.
@awonderingoneil2062 жыл бұрын
I’m so jealous now because my dream to own old bike because I just love old school you are amazing man
@abbasalberto74546 жыл бұрын
I cryed when you painted the tank lol :( Love the bike im been building a xv250 over on my channel, just did a solo seat on it, you got yourself a new subscriber
@TattsForLife5 жыл бұрын
That is bad ass, and to have a video of your full build motivates me.
@chitboxdeluxe35426 жыл бұрын
That's about how cool a Virago ever get. Well done, Sir!
@thefreedomguyuk6 жыл бұрын
very nice looks amazing me myself i think i will do same kinda look but on yamaha xvs dragstar 125
@rcmaniac777 жыл бұрын
RC maniac Nice idea. But you will be spending loads of time & money on a bike you won't be able to sell on at a decent price later. I'd say spend some cash getting your full license, and break into projects on full size bikes, where you can recuperate your expenses by selling your completed bike.
@thefreedomguyuk6 жыл бұрын
what a transformation...awesome job..i have a virago myself..inspiration
@janek74996 жыл бұрын
Very inspiring build and video. Been thinking of doing something like this to one of my yamahas for a while now and this just confirmed it.
@jasonwitkop64465 жыл бұрын
You have just inspired a lot of people by your hard work
@bryanignatius5 жыл бұрын
A 125cc bobber. Great for anyone with an A1 license
@WorivpuqloDMogh5 жыл бұрын
Very true. İts good for new bobber lovers and new drivers.
@semihcangulterler62024 жыл бұрын
@@semihcangulterler6202 yeah indeed. I am planning on getting one. Honda shadow or this one. Probably modify it to a bobber as well
@WorivpuqloDMogh4 жыл бұрын
I've never seen a 125cc V twin before.
@geeleon76434 жыл бұрын
@@geeleon7643 i didnt know it was a thing until this bike
@WorivpuqloDMogh4 жыл бұрын
It says "this video is unavailable on this device" I tried watching it on my computer and smartphone but it keeps saying that. I loved this video, it gives me motivation to work on my bike but I can't watch it anymore
@franarregui62073 жыл бұрын
Happens to me too
@drhello-xf9df3 жыл бұрын
Does it work now?
@robinhakenrudedvardsen58163 жыл бұрын
Congratulations, great job in garage!!! Nice bike.
@luizbarretto73976 жыл бұрын
Que coisa linda.. nunca vi uma transformação assim. Em vídeo.. nossa sempre tive curiosidade como era isso!!! Showww
@palavraliberta65846 жыл бұрын
Nice bike. Personally would have left the white on the tank though
@andrewknutson21756 жыл бұрын
Andrew Knutson yeah I wouldn't have painted it black at all the blue with the hints of black everywhere looked good
@vicsmotos37026 жыл бұрын
victor trout yup
@DenisDanca6 жыл бұрын
Cringe when he just put black spraypaint over nice looking factory paint instead of giving it a professional paint job
@sandervalckx97966 жыл бұрын
Yea that blue looked amazing. Still looks really nice black though. Dope shit
@fredrickt.douchingtoniii35495 жыл бұрын
Have those chrome spoke wheels powder coated red and trick out tank w/ some pinstripes would look nice also!
@johnlock6375 жыл бұрын
Ficou incrível !!! Parabéns meu amigo ! 🇧🇷
@Valtoir5 жыл бұрын
the best ever seen for a 125 virago, damned bud, congretulations from france.
@lologazon45876 жыл бұрын
Outstanding Bro.. You are a Rock Star! Rolling Hill Texas!
@scottspurgeon67774 жыл бұрын
Awesome fuckin build dude! The struggle of living in Norway and not beind able to ride for half the year haha. Plenty time for builds at least :D
@rainers5356 жыл бұрын
True!
@robinhakenrudedvardsen58166 жыл бұрын
Aching for that snow to get the fuck outta the way dude!
@Z4G.6 жыл бұрын
This build is absolute perfection. Love it. 👌 Mind if I copy your styling? XD
@Ayrtonium7 жыл бұрын
Ayrtonium Thanks. hehe no problem 😁
@robinhakenrudedvardsen58167 жыл бұрын
dude are kidding me? you really nailed it, great job man!
@marios_tsf5 жыл бұрын
thank you for that lay out what the tracks played in the video
@Trambulstilskin5 жыл бұрын
In the start it was clean and Nice now tuf and cool
@elpelle92266 жыл бұрын
Woah never saw a white wall like that
@montanawhite56996 жыл бұрын
AMAZING ! Good job my friend ! 🇫🇷
@antoineh27195 жыл бұрын
Never let no one tell you , you not a hard work man because you are....fantastic job man ....
@MikeLuisCozinheiro756 жыл бұрын
Badass. What was your cost spend on this build
@Pc-ji8we5 жыл бұрын
nice video well done !👍
@designpie6 жыл бұрын
:)
@designpie6 жыл бұрын
I am so much impressed! You made it looking so good I pity this is only 125 :( GREAT JOB MAN!!
@krzysztofczaplinski95495 жыл бұрын
Although you left only the lower "brige " of the fork unpainted .the one who has the label Yamaha. ...YOU have done great job! !
@crazyumpire6 жыл бұрын
so did you ever end up lowering the suspension to get that stance? Or is it just an optical illusion.
@jackpistone80155 жыл бұрын
great jobs! I like the way that you rebuild your bike, I'm interested with the solo seat kit that fixed to, if you don't mind could you tell where can get that? and what inch of the spring that use for the seat?
@sofirosli33516 жыл бұрын
www.ebay.com/itm/Black-Fire-Type-Solo-Driver-Seat-Base-Spring-Bracket-For-Harley-Bobber-Chopper-/182568223216?hash=item2a81ea01f0:g:PAMAAOSwax5YvPuA&vxp=mtr The springs that followed was verhy high, so i found someone from an old bike.
@robinhakenrudedvardsen58166 жыл бұрын
Nice easy cheap work. People complaining about painting and stuff. It’s a bobber not a show bike. I have 3 project bikes right now. A Suzuki intruder 1500 and two 650 savages. Can’t wait to start. Gonna be fun projects. Do what you can at your price and skill level and enjoy the ride! 🤙🏻
@xschm1dx4 жыл бұрын
an inspiration for many aspiring dyi’s indeed. ive always loved the rebel spirit of the muscle bike class. totally Americano. just pure independence freedom of expression and an unbridled passion to accomplish something in your own garage. thats one small step for your bike, one big step for your life ahead. dont stop the dream and never settle. always do your best and always try to do better than before. what you did was the work of pure heart and skills. its art. i dont care what anyone says about how they would do it differently, thats fine and all but to each his own. he did it the way he wanted it. and now hes a bad ass.
@aaronautry19814 жыл бұрын
i'm glad u keepin the two back suspension ! every bobber addict put a type of bar at this place but i think its shit to drive a bike like that, it's better to have the 2 suspension and its more beautiful too ;)
@bucksorel68056 жыл бұрын
What lowering kit did u use?
@lestherdelavega68275 жыл бұрын
Incrível!!!!!Obra de arte
@ricardoaraujomeireles66265 жыл бұрын
I can advise you ... always disassemble the motorcycle before painting and paint the motorcycle after the fabricacion process . All and all good job kido
@kreoloskar98053 жыл бұрын
Parabéns pelo trabalho na moto. Ficou muito bonita..
@itamarmoura40805 жыл бұрын
Impresionante
@RubberSoul736 жыл бұрын
Awesome job! What were you using to paint the engine? Must be high temperature resilient....
@TheWhaddeva6 жыл бұрын
I dont know what it is called in English, but here in Norway we call it heat lacquer
@robinhakenrudedvardsen58166 жыл бұрын
Thank you, I will be doing bobber conversion to either Yamaha VX1100 or Honda VTX1800C, they are amazing machines, sounding awesome and far, far more reliable than Harley engines. Good on you bro! :-)
@TheWhaddeva6 жыл бұрын
I'm starting a bobber build on a Suzuki 650 savage, it will be fun. Thanks for the video.
@BSB3334 жыл бұрын
that's what's called giving style to a bike! well done
@DamienArnould6 жыл бұрын
Bravo
@diegoromain92157 жыл бұрын
Thanks :)
@robinhakenrudedvardsen58167 жыл бұрын
Bravo,,,,
@djaatmikodj84976 жыл бұрын
dream kind of a bike :)
@petmalu32076 жыл бұрын
Very nice, been customizing my virago 250 , bought bout 15mths ago, still on-going , in between riding to autojumbles, bike do,s etc, #Vid xxx
@daveyjennyville6 жыл бұрын
Looks great - would love to have heard what it sounds like.
@jonnietube4 жыл бұрын
buenisima transformacion, amazing bro, great job, i do the same with my motorcycle
@gabrielcabanhas7 жыл бұрын
Nice!
@robinhakenrudedvardsen58167 жыл бұрын
sick video man
@LickleSparky7 жыл бұрын
Thanks :)
@robinhakenrudedvardsen58167 жыл бұрын
beautiful! currently building one myself.
@thatslammed10347 жыл бұрын
Nice video...I just started building a 1981 Virago 750. I’m doing it a little different though, and will be running some dual sport tires because I ride on dirt a lot :)
@rust29855 жыл бұрын
Dude.... take the front wheel out and paint the front forks... now you have more time spent to tape it off/maks it.... And the risk that you have missed some spots... front wheel out is 1 minute
@chillozz16 жыл бұрын
I know. I was just 16 years old at the time and didn`t knew so much. I`ve have never done anything like this. This was my first project. There`s are a lot of things i would change and do better if i had a project today :) Cause now i have more experience :)
@robinhakenrudedvardsen58166 жыл бұрын
@Raphael Gallo inside the headlight? I had to mark everything:)
@robinhakenrudedvardsen58164 жыл бұрын
Robin Håkenrud Edvardsen For the future, i want to give you one tip. Dont lower the back without getting the swingarm pivoting from a new place, keeping the swingarm angle correct (between wheel nut and seingarm pivot) (usually this is such a huge job youre better of just building your own frame from scratch tbh). On a 125 it might go unnoticed, but when you get to more powerful bikes you will notice that this change will completely collapse the rear suspension during acceleration and it will lead to loss of grip as a result. From factory you usually want to raise the rear of a bike a little to get optimal swing arm angles and trail on the front. This compromise for looks/ease to flatfoot the bike is a very common thing people do when getting into biking, just wanted to point it out to you so you know for future projects 👊 Awesome build otherwise, i couldnt have pulled that off when i was 16. Well done!
@SportSoulLife3 жыл бұрын
now that is a nice bike
@owennireland84696 жыл бұрын
Thanks!!
@robinhakenrudedvardsen58166 жыл бұрын
Who knew a Yam 125 could turn out so sweet!
@mukhumor5 жыл бұрын
Tack för inspirationen, Grymt bygge :D
@DrWaern6 жыл бұрын
I am so jealous right now :P
@ClaudiuMunteanu6 жыл бұрын
Claudiu Munteanu 😁
@robinhakenrudedvardsen58166 жыл бұрын
:- )
@blueharth6 жыл бұрын
jealous for 1000€ bike hah :D
@jfc35526 жыл бұрын
si eu :))
@andreipetrescu51116 жыл бұрын
what's your cat's name? very nice kitten ;) btw nice bike
@o6z6z6y7 жыл бұрын
o6z6z6y hahaha😂 His name is Diesel 😁 Thanks!👊
@robinhakenrudedvardsen58167 жыл бұрын
Decent build mate!
@bccustoms32626 жыл бұрын
That’s an absolutely gorgeous bike bro
@ShumonB5 жыл бұрын
Excellent !! une pure merveille je suis jaloux :D
@tybull21257 жыл бұрын
Dude after watching this you got me pumped about doing my cx500 thanks for the inspiration to keep at it
@noahtrowbridge74825 жыл бұрын
Dude I just picked up an 81 deluxe cx had to replace broken timing chain guid you should check yours too j guess it's pretty common
@jakepennington85075 жыл бұрын
Looks like it would be a blast to ride around. Good job.
@oldmanriverrimington34426 жыл бұрын
I'm just watching a bunch of motorcycle videos cause my bike is in the shop getting repaired. 😞
@ihopeutubedies6 жыл бұрын
I'm just watching cos i can't fucking afford one.😂😂
@kirkarvint.20175 жыл бұрын
@boss man I have an Aprilia Mana 850 the belt on this bike is $211 $200 for service this bike is really sucking my wallet dry. I want to tell you all the other things I paid for that cost me a arm and a leg but it brings me so much joy and happiness
@eddieg8495 жыл бұрын
it is better to disassemble and paint separately in powder paint
@Kolhozneg6 жыл бұрын
and also not paint mating surfaces with a double coat
@markstraeter5 жыл бұрын
Я придерживаюсь такого же мнения!!! (I hold the same opinion)
@Neon-Nights-Radio4 жыл бұрын
I have watched this video like 1000 times and it is so inspirational well done
@WayneRichardson853 жыл бұрын
parabéns! ficou linda! um sonho.
@MrAndrefaciochi5 жыл бұрын
why is it unavailable on my device??[linux]
@kaianonymous44923 жыл бұрын
Nice work 👍
@miquelangelm.e.68187 жыл бұрын
Thanks!
@robinhakenrudedvardsen58167 жыл бұрын
Really cool! im not really big of a virago 125 fan, but as a young rider i can see the charm in this bike, very nice job :D
@kanggoo575 жыл бұрын
Just Beautiful. Good job dude!
@cedricpronier79285 жыл бұрын
DOPE
@fabiomachado84327 жыл бұрын
:)
@robinhakenrudedvardsen58167 жыл бұрын
great video loving the white wall inserts and indicators do you have any links for them.
Nice and clean job! ride hard live fast, and try to stay safe!!! greetings bro from the other side of the planet!!
@giovanniquesadamonge89656 жыл бұрын
WOW what a transformation it just goes to show you don't need a huge engine machine to look cool well done
@1234hellinthepacfic7 жыл бұрын
Thanks man! There have been a lot of people asking me about the size of the engine, and they get shock when i say its a 125 :)
@robinhakenrudedvardsen58167 жыл бұрын
you would paint the tires in black, would be better
@badereddinkhlifi78796 жыл бұрын
For sale
@jwfvideos12256 жыл бұрын
No
@robinhakenrudedvardsen58166 жыл бұрын
trilha sonora muito show, a moto tambem ficou muito legal, inspiração para mim. (soundtrack very show, the bike was also very cool, inspiration for me.)
@dorianfaustino6 жыл бұрын
That is One hell of a Good build. im probably going build My first One from a virago 125cc this Winter since i turn 16 next summer
@melkernorum82735 жыл бұрын
Nice
@robinhakenrudedvardsen58165 жыл бұрын
Waiting for your vid!
@user-ls9nc2ml7t5 жыл бұрын
Me too
@andremaia76385 жыл бұрын
@@user-ls9nc2ml7t its going to be up on @rewheeled since its my dad and he is going to help me because he is experienced in this area :) its probably going to be up in 2 months since im going to buy it next week :)
@melkernorum82735 жыл бұрын
ELITEsuspect Thanks! Looking forward to see it ! Now l ride vintage Vespa ET3(changed125→130cc）in Tokyo.
@user-ls9nc2ml7t5 жыл бұрын
U made a shit bike look cool
@jackgibbons74106 жыл бұрын
It wasnt shit , but it looks better now
@nightspirits56086 жыл бұрын
Yeah its still shit bike tho
@jfc35526 жыл бұрын
First of all you are a piece of shit. That bike is a friggin classic yamaha 250 bitchhh. It was one of the coolest cruiser bike when it was launched back . My dad bought it when i finished my highschool for me to go to college. I fixed its handle and drilled a hole on its both exhaust. Students at college use to give me side eyes, front eyes, back eyes lol. That bike is the reason i got laid during my college days.
@stonedondota99386 жыл бұрын
Sail Dean Bhattarai i agree its a really good bike , i have a Yamaha XVS 1300 midnight star
@nightspirits56086 жыл бұрын
Dank Memes Damn midnigh star is fkin beast. Last year i rode one of those yamaha 900 from Canadian border to Mexican border. It was hell of a ride.
@stonedondota99386 жыл бұрын
good loking bike but not good to drive ...
@TheAgoProduction6 жыл бұрын
mine's set up in a similiar way and it's comfy as fucc
@shedman73066 жыл бұрын
Really nice bike dude! The rear suspension, do you adapted the existing one or bought news ones? with the slowers lenght. If are new ones, could you share the specifications? I really like, congrats!
@jhonydalcin49884 жыл бұрын
Great job on the conversion. Digging the white wall setup. Need those for my fat boy. Too bad you couldn't get it to sound a little meaner...even for a small bore machine. Almost 800,000 views! Killin it, bud. Do another.
@MOTOPILOT66 жыл бұрын
that's a bitchin little bike.
@randallhuston14666 жыл бұрын
Did you find youre license from a cerial pack or something? Every kid would be riding a 600 or 1000s if the A1-license would allow this. Gains for the brains.
@h.l.696 жыл бұрын
Tiene 125 cc yo pensava que 1000
@roshigarcia43276 жыл бұрын
Good work comrade! Hugs from Brazil!
@julianobissoli40256 жыл бұрын
What a beauty!! Awesome job! 🙌🤘
@Socio194 жыл бұрын
It's 250cc
@adaltomotoraid6 жыл бұрын
no
@robinhakenrudedvardsen58166 жыл бұрын
125cc
@777naej6 жыл бұрын
Adalto Motoraid don't matter it's Badass
@chopperchill46996 жыл бұрын
No it's 125cc
@wyrii32736 жыл бұрын
Sorry this one is a 125cc. 250cc big bore kit is illegal without the proper papers and new registration wich you need to apply for with still a low chance if approval in order to make it road legal. That is why it’s so uncommon.
@Danol1236 жыл бұрын
Лайк. Если просто ищешь русский коммент
@d_o_k_nepobedimyij54665 жыл бұрын
Great job !!! That's a Awesome looking bike now. You gave me idea
@KayakingAdventuresofTN5 жыл бұрын
Dude you make really nice quality vids. And good beats added too. Nice job going to get a 95 535 this week haha
@jacobpennington45956 жыл бұрын
Thanks! ooo a 535! thats cool!
@robinhakenrudedvardsen58166 жыл бұрын
Nice job dude! I would shorten the front fork a little. Would make it look a little more aggressive! Love it man
@CalVlogz6 жыл бұрын
Nice transformation bro!
@AtrKrytico6 жыл бұрын
Did a great job, me personally I wouldn't of put the white walls on the tires as not a fan of them, but it's what you like then go for it, other than that great job man, enjoy it.
Link to the white tire wall in description!
Nordic Rider thanks bro ride safe
Nordic Rider is it normal spray paint or car paint?
They are dangerous as fuck ! Tire can jump of the wheel
må man søke til bt for å bygge om til bobber?
Swen Sterckx I assume you're referring to the white wall inserts he used? Those inserts are designe to run on the wheel without causing interference man. The manufacturer knows what they are building and the dangers associated with something like their insert. the pressure on the wheel from the tire is so immense that once its inflated you couldn't pull it out if you tried. Also considering the fact that hes running spoked wheels that means hes running an innertube which means the tube would increase the density/amount of material that would be putting pressure against the rim pinning the insert in that much more. You should try them. They look amazing and are a very cost effective way to achieve the white wall look. It won't even cause the wheel to be out of balance.
man i love that you did this . it gives me the confidence to try it myself sick
Fantastic build. Super simple and it looks great! I've never seen anyone slap whitewalls on tires before.
I love to watch things like this it takes me right back to the 70s when I was a kid and thought nothing of stripping down my bike engine in a morning in cold rainy old London...nice job...like the ride.
Sehr schöner Umbau 👌👏😊
looks great mate,nice job
It turned out way cooler even though it's only 125. Greetings from Finland!
Nice job, I like the fact that the frame does not have to be cut, and you get to keep the original rear shocks.
I like how you kept the rear shocks and didn't just hardtail the back. Damn pot holes and bumps in Europe are enough to shatter your balls riding hardtail lol. Awesome work man.
I’m so jealous now because my dream to own old bike because I just love old school you are amazing man
I cryed when you painted the tank lol :( Love the bike im been building a xv250 over on my channel, just did a solo seat on it, you got yourself a new subscriber
That is bad ass, and to have a video of your full build motivates me.
That's about how cool a Virago ever get. Well done, Sir!
very nice looks amazing me myself i think i will do same kinda look but on yamaha xvs dragstar 125
RC maniac Nice idea. But you will be spending loads of time & money on a bike you won't be able to sell on at a decent price later. I'd say spend some cash getting your full license, and break into projects on full size bikes, where you can recuperate your expenses by selling your completed bike.
what a transformation...awesome job..i have a virago myself..inspiration
Very inspiring build and video. Been thinking of doing something like this to one of my yamahas for a while now and this just confirmed it.
You have just inspired a lot of people by your hard work
A 125cc bobber. Great for anyone with an A1 license
Very true. İts good for new bobber lovers and new drivers.
@@semihcangulterler6202 yeah indeed. I am planning on getting one. Honda shadow or this one. Probably modify it to a bobber as well
I've never seen a 125cc V twin before.
@@geeleon7643 i didnt know it was a thing until this bike
It says "this video is unavailable on this device" I tried watching it on my computer and smartphone but it keeps saying that. I loved this video, it gives me motivation to work on my bike but I can't watch it anymore
Happens to me too
Does it work now?
Congratulations, great job in garage!!! Nice bike.
Que coisa linda.. nunca vi uma transformação assim. Em vídeo.. nossa sempre tive curiosidade como era isso!!! Showww
Nice bike. Personally would have left the white on the tank though
Andrew Knutson yeah I wouldn't have painted it black at all the blue with the hints of black everywhere looked good
victor trout yup
Cringe when he just put black spraypaint over nice looking factory paint instead of giving it a professional paint job
Yea that blue looked amazing. Still looks really nice black though. Dope shit
Have those chrome spoke wheels powder coated red and trick out tank w/ some pinstripes would look nice also!
Ficou incrível !!! Parabéns meu amigo ! 🇧🇷
the best ever seen for a 125 virago, damned bud, congretulations from france.
Outstanding Bro.. You are a Rock Star! Rolling Hill Texas!
Awesome fuckin build dude! The struggle of living in Norway and not beind able to ride for half the year haha. Plenty time for builds at least :D
True!
Aching for that snow to get the fuck outta the way dude!
This build is absolute perfection. Love it. 👌 Mind if I copy your styling? XD
Ayrtonium Thanks. hehe no problem 😁
dude are kidding me? you really nailed it, great job man!
thank you for that lay out what the tracks played in the video
In the start it was clean and Nice now tuf and cool
Woah never saw a white wall like that
AMAZING ! Good job my friend ! 🇫🇷
Never let no one tell you , you not a hard work man because you are....fantastic job man ....
Badass. What was your cost spend on this build
nice video well done !👍
:)
I am so much impressed! You made it looking so good I pity this is only 125 :( GREAT JOB MAN!!
Although you left only the lower "brige " of the fork unpainted .the one who has the label Yamaha. ...YOU have done great job! !
so did you ever end up lowering the suspension to get that stance? Or is it just an optical illusion.
great jobs! I like the way that you rebuild your bike, I'm interested with the solo seat kit that fixed to, if you don't mind could you tell where can get that? and what inch of the spring that use for the seat?
www.ebay.com/itm/Black-Fire-Type-Solo-Driver-Seat-Base-Spring-Bracket-For-Harley-Bobber-Chopper-/182568223216?hash=item2a81ea01f0:g:PAMAAOSwax5YvPuA&vxp=mtr The springs that followed was verhy high, so i found someone from an old bike.
Nice easy cheap work. People complaining about painting and stuff. It’s a bobber not a show bike. I have 3 project bikes right now. A Suzuki intruder 1500 and two 650 savages. Can’t wait to start. Gonna be fun projects. Do what you can at your price and skill level and enjoy the ride! 🤙🏻
an inspiration for many aspiring dyi’s indeed. ive always loved the rebel spirit of the muscle bike class. totally Americano. just pure independence freedom of expression and an unbridled passion to accomplish something in your own garage. thats one small step for your bike, one big step for your life ahead. dont stop the dream and never settle. always do your best and always try to do better than before. what you did was the work of pure heart and skills. its art. i dont care what anyone says about how they would do it differently, thats fine and all but to each his own. he did it the way he wanted it. and now hes a bad ass.
i'm glad u keepin the two back suspension ! every bobber addict put a type of bar at this place but i think its shit to drive a bike like that, it's better to have the 2 suspension and its more beautiful too ;)
What lowering kit did u use?
Incrível!!!!!Obra de arte
I can advise you ... always disassemble the motorcycle before painting and paint the motorcycle after the fabricacion process . All and all good job kido
Parabéns pelo trabalho na moto. Ficou muito bonita..
Impresionante
Awesome job! What were you using to paint the engine? Must be high temperature resilient....
I dont know what it is called in English, but here in Norway we call it heat lacquer
Thank you, I will be doing bobber conversion to either Yamaha VX1100 or Honda VTX1800C, they are amazing machines, sounding awesome and far, far more reliable than Harley engines. Good on you bro! :-)
I'm starting a bobber build on a Suzuki 650 savage, it will be fun. Thanks for the video.
that's what's called giving style to a bike! well done
Bravo
Thanks :)
Bravo,,,,
dream kind of a bike :)
Very nice, been customizing my virago 250 , bought bout 15mths ago, still on-going , in between riding to autojumbles, bike do,s etc, #Vid xxx
Looks great - would love to have heard what it sounds like.
buenisima transformacion, amazing bro, great job, i do the same with my motorcycle
Nice!
sick video man
Thanks :)
beautiful! currently building one myself.
Nice video...I just started building a 1981 Virago 750. I’m doing it a little different though, and will be running some dual sport tires because I ride on dirt a lot :)
Dude.... take the front wheel out and paint the front forks... now you have more time spent to tape it off/maks it.... And the risk that you have missed some spots... front wheel out is 1 minute
I know. I was just 16 years old at the time and didn`t knew so much. I`ve have never done anything like this. This was my first project. There`s are a lot of things i would change and do better if i had a project today :) Cause now i have more experience :)
@Raphael Gallo inside the headlight? I had to mark everything:)
Robin Håkenrud Edvardsen For the future, i want to give you one tip. Dont lower the back without getting the swingarm pivoting from a new place, keeping the swingarm angle correct (between wheel nut and seingarm pivot) (usually this is such a huge job youre better of just building your own frame from scratch tbh). On a 125 it might go unnoticed, but when you get to more powerful bikes you will notice that this change will completely collapse the rear suspension during acceleration and it will lead to loss of grip as a result. From factory you usually want to raise the rear of a bike a little to get optimal swing arm angles and trail on the front. This compromise for looks/ease to flatfoot the bike is a very common thing people do when getting into biking, just wanted to point it out to you so you know for future projects 👊 Awesome build otherwise, i couldnt have pulled that off when i was 16. Well done!
now that is a nice bike
Thanks!!
Who knew a Yam 125 could turn out so sweet!
Tack för inspirationen, Grymt bygge :D
I am so jealous right now :P
Claudiu Munteanu 😁
:- )
jealous for 1000€ bike hah :D
si eu :))
what's your cat's name? very nice kitten ;) btw nice bike
o6z6z6y hahaha😂 His name is Diesel 😁 Thanks!👊
Decent build mate!
That’s an absolutely gorgeous bike bro
Excellent !! une pure merveille je suis jaloux :D
Dude after watching this you got me pumped about doing my cx500 thanks for the inspiration to keep at it
Dude I just picked up an 81 deluxe cx had to replace broken timing chain guid you should check yours too j guess it's pretty common
Looks like it would be a blast to ride around. Good job.
I'm just watching a bunch of motorcycle videos cause my bike is in the shop getting repaired. 😞
I'm just watching cos i can't fucking afford one.😂😂
@boss man I have an Aprilia Mana 850 the belt on this bike is $211 $200 for service this bike is really sucking my wallet dry. I want to tell you all the other things I paid for that cost me a arm and a leg but it brings me so much joy and happiness
it is better to disassemble and paint separately in powder paint
and also not paint mating surfaces with a double coat
Я придерживаюсь такого же мнения!!! (I hold the same opinion)
I have watched this video like 1000 times and it is so inspirational well done
parabéns! ficou linda! um sonho.
why is it unavailable on my device??[linux]
Nice work 👍
Thanks!
Really cool! im not really big of a virago 125 fan, but as a young rider i can see the charm in this bike, very nice job :D
Just Beautiful. Good job dude!
DOPE
:)
great video loving the white wall inserts and indicators do you have any links for them.
www.ebay.com/itm/ATLAS-Front-18-Back-15-Motorcycle-White-Wall-Port-a-wall-Tire-insert-Trim-Set-/331607205857?hash=item4d355467e1:g:xNEAAOSwjVVVixbi&vxp=mtr
i cant watch this video :(
Does it work now?
Nice and clean job! ride hard live fast, and try to stay safe!!! greetings bro from the other side of the planet!!
WOW what a transformation it just goes to show you don't need a huge engine machine to look cool well done
Thanks man! There have been a lot of people asking me about the size of the engine, and they get shock when i say its a 125 :)
you would paint the tires in black, would be better
For sale
No
trilha sonora muito show, a moto tambem ficou muito legal, inspiração para mim. (soundtrack very show, the bike was also very cool, inspiration for me.)
That is One hell of a Good build. im probably going build My first One from a virago 125cc this Winter since i turn 16 next summer
Nice
Waiting for your vid!
Me too
@@user-ls9nc2ml7t its going to be up on @rewheeled since its my dad and he is going to help me because he is experienced in this area :) its probably going to be up in 2 months since im going to buy it next week :)
ELITEsuspect Thanks! Looking forward to see it ! Now l ride vintage Vespa ET3(changed125→130cc）in Tokyo.
U made a shit bike look cool
It wasnt shit , but it looks better now
Yeah its still shit bike tho
First of all you are a piece of shit. That bike is a friggin classic yamaha 250 bitchhh. It was one of the coolest cruiser bike when it was launched back . My dad bought it when i finished my highschool for me to go to college. I fixed its handle and drilled a hole on its both exhaust. Students at college use to give me side eyes, front eyes, back eyes lol. That bike is the reason i got laid during my college days.
Sail Dean Bhattarai i agree its a really good bike , i have a Yamaha XVS 1300 midnight star
Dank Memes Damn midnigh star is fkin beast. Last year i rode one of those yamaha 900 from Canadian border to Mexican border. It was hell of a ride.
good loking bike but not good to drive ...
mine's set up in a similiar way and it's comfy as fucc
Really nice bike dude! The rear suspension, do you adapted the existing one or bought news ones? with the slowers lenght. If are new ones, could you share the specifications? I really like, congrats!
Great job on the conversion. Digging the white wall setup. Need those for my fat boy. Too bad you couldn't get it to sound a little meaner...even for a small bore machine. Almost 800,000 views! Killin it, bud. Do another.
that's a bitchin little bike.
Did you find youre license from a cerial pack or something? Every kid would be riding a 600 or 1000s if the A1-license would allow this. Gains for the brains.
Tiene 125 cc yo pensava que 1000
Good work comrade! Hugs from Brazil!
What a beauty!! Awesome job! 🙌🤘
It's 250cc
no
125cc
Adalto Motoraid don't matter it's Badass
No it's 125cc
Sorry this one is a 125cc. 250cc big bore kit is illegal without the proper papers and new registration wich you need to apply for with still a low chance if approval in order to make it road legal. That is why it’s so uncommon.
Лайк. Если просто ищешь русский коммент
Great job !!! That's a Awesome looking bike now. You gave me idea
Dude you make really nice quality vids. And good beats added too. Nice job going to get a 95 535 this week haha
Thanks! ooo a 535! thats cool!
Nice job dude! I would shorten the front fork a little. Would make it look a little more aggressive! Love it man
Nice transformation bro!
Did a great job, me personally I wouldn't of put the white walls on the tires as not a fan of them, but it's what you like then go for it, other than that great job man, enjoy it.
Very nice 👍👍 love the way it turned out great job