Capture Your Natural Foot Shape
Raven™ Insoles composite foot cradle is designed to be reshaped to your foot. The heel cup of the cradle has small slits made around the upper radius to allow the cup to expand for larger sized feet. These slits may or may not be visible after molding.
Raven™ Insoles are compatible with most cycling shoes.
For the best fitting result, place your current insole on top of the Raven™ insole and trace the forefoot shape with a marker. Trim away the excess forefoot foam. It is often better to cut less away and check the fitting of the insole inside the shoe, if the insole wrinkles or fits too tightly, trim away more excess material from the forefoot.
Wicking textile face fabric
Firm EVA foam
Carbon Fiber or Fiber Glass Composite Laminate
COLORS: Black
SIZE: S(36-39), M(40-43), L(44-46), XL(47-50)
Available at your local dealer or at
lakecycling.com/collections/i...
::::::::::::::::::::
Music: Adventure by DarkMoloko is licensed under a Creative Commons License.
creativecommons.org/licenses/...
Support by RFM - NCM: bit.ly/2xGHypM
::::::::::::::::::::
Hi there. Is it 90C or 80C? The video says 90C, but the supplied instructions say 80C!
We had found most peoples oven's cannot go to 80º as the lowest setting for many ovens are 90º. We had to make heating instructions also that can also work for 90º.
After it’s been heat molded, would the carbon fiber be hard and stiff or would it be rather flexible?
After heat molding and cooling down it will return to the same stiffness as before it was heated.
Hello, would I be able to fit this with my shimano shoes?
These insoles work with most other shoe brand. The toe area can be trimmed to fit a variety of shoe shapes.