So a shim in the front will correct the lean? No shackle/block in the rear? Thanks
@Pelrod2 ай бұрын
Bellow and thank you for your video on the spacer lift. I have been looking everywhere with no luck finding ALor steel 1/4” spacers for my 2005 sequoia. eBay has plastic ones but those are no good. Do you know if where you got these if they make them for a sequoia? Thank you!
@garyharrison3247 ай бұрын
Will the OME 612 work On the bilstein 5100 For tundra (lowest clip setting)
@i_scholar3283 Жыл бұрын
Can you confirm my 2nd ? About the lift kit , I won’t be useing 5100 struts on the front , Will shims this with lift spacers
@ranardthomas6753 Жыл бұрын
You stated 2 spacers on the driver side and 1 on the passenger Rite. I wanna make sure I get this set up rite for my mechanic to install
@ranardthomas6753 Жыл бұрын
Yes sir to get rid of the Tundra lean
@Apexoffroadpower Жыл бұрын
Awesome information ? can you use these on a leveling lift kit ? I purchased a 3 1 leveling kit that uses a spacer’s to raise the front and a spacer block in the rear I just received the tundra spacers today wondering if this setup work as well
@ranardthomas6753 Жыл бұрын
Can you, yes. Should you, no. Do it right. You paid a lot of money for your truck and just throwing spacers on it is a bad way to do things. Do it once and do it right. Find out how much lift you want and get the kit that supports that amount of lift.
@Apexoffroadpower Жыл бұрын
I have a TRD Pro tundra. Which by factory came as level. I constantly putting weight on the back and always feel like it’s squatting a little. I don’t do any towing. How much lift will I get with this if I install them on the back? Or do you recommend shackles? Thank you in advance. 👊🏼
@JohnHVACR Жыл бұрын
These don't go on the back. These are for the front only. I will be launching my new shackles next week but you can so blocks, shackles or leaf springs for more lift but the best thing for heavy weight is air bags. Email me anthony@apexoff-road.com
@Apexoffroadpower Жыл бұрын
To get a 3" lift on a 6112, would i set the C clip on the 3rd setting or the 4th setting?
@biggiethao53156 ай бұрын
Top setting is 2.5" so you would need shims. These shims provide .5" of lift each
@Apexoffroadpower6 ай бұрын
@@Apexoffroadpower ok, thank you!!
@biggiethao53156 ай бұрын
Thanks man i really appreciate your time and information I also took you advice and purchase both front and back. , 5100 strut leveling kit , with this modification kit I will get a total level of 3 inch in front with the shims and 3 inch in back Correct 👍 Which Will make perfect 3 inch front & back correct. Sorry for all the Dum questions just trying to get it rite sorry for any inconvenience Thanka
@ranardthomas6753 Жыл бұрын
Will this work on my 2.5 king shocks ?
@jessehernandez12345 Жыл бұрын
Yes but you will need a bolt kit and king doesn't like shims on their products.
@Apexoffroadpower Жыл бұрын
Can you use those with a spacer lift?
@jasonbratton7150 Жыл бұрын
What size spacer? What are you trying to accomplish
@Apexoffroadpower Жыл бұрын
@@Apexoffroadpower 1/2" lift to a 3/1.5 lift kit
@jasonbratton7150 Жыл бұрын
Yeah you can but I would consider swapping out for actually lifted struts/shocks/coilovers.
@Apexoffroadpower Жыл бұрын
@@Apexoffroadpower thanks my man
@jasonbratton7150 Жыл бұрын
@@Apexoffroadpower where is your link for the spacer
@kevinmansur3690 Жыл бұрын
How can I purchase 3 shims for my 2018 tundra it has a leveling kit on it It’s Level to 3 inch in the rear 2.5 front. I believe theis shims wil level my off to 3inch in front to match the rear 3 inch rite ! I would like to purchase Asap Can you send me a link where to purchase
Thanks. !!! 1 ? I have 3 inch lift kit on 2018 tundra , it’s like 2.5 front and 1 in the rear !! Will the shims Work with the lift kit Like you described 2 driver side 1 passenger Im only installing the 5100 on the rear Will the shims work on this type set up !!
Finally some good straight advice!
So a shim in the front will correct the lean? No shackle/block in the rear? Thanks
Bellow and thank you for your video on the spacer lift. I have been looking everywhere with no luck finding ALor steel 1/4” spacers for my 2005 sequoia. eBay has plastic ones but those are no good. Do you know if where you got these if they make them for a sequoia? Thank you!
Will the OME 612 work On the bilstein 5100 For tundra (lowest clip setting)
Can you confirm my 2nd ? About the lift kit , I won’t be useing 5100 struts on the front , Will shims this with lift spacers
You stated 2 spacers on the driver side and 1 on the passenger Rite. I wanna make sure I get this set up rite for my mechanic to install
Yes sir to get rid of the Tundra lean
Awesome information ? can you use these on a leveling lift kit ? I purchased a 3 1 leveling kit that uses a spacer’s to raise the front and a spacer block in the rear I just received the tundra spacers today wondering if this setup work as well
Can you, yes. Should you, no. Do it right. You paid a lot of money for your truck and just throwing spacers on it is a bad way to do things. Do it once and do it right. Find out how much lift you want and get the kit that supports that amount of lift.
I have a TRD Pro tundra. Which by factory came as level. I constantly putting weight on the back and always feel like it’s squatting a little. I don’t do any towing. How much lift will I get with this if I install them on the back? Or do you recommend shackles? Thank you in advance. 👊🏼
These don't go on the back. These are for the front only. I will be launching my new shackles next week but you can so blocks, shackles or leaf springs for more lift but the best thing for heavy weight is air bags. Email me anthony@apexoff-road.com
To get a 3" lift on a 6112, would i set the C clip on the 3rd setting or the 4th setting?
Top setting is 2.5" so you would need shims. These shims provide .5" of lift each
@@Apexoffroadpower ok, thank you!!
Thanks man i really appreciate your time and information I also took you advice and purchase both front and back. , 5100 strut leveling kit , with this modification kit I will get a total level of 3 inch in front with the shims and 3 inch in back Correct 👍 Which Will make perfect 3 inch front & back correct. Sorry for all the Dum questions just trying to get it rite sorry for any inconvenience Thanka
Will this work on my 2.5 king shocks ?
Yes but you will need a bolt kit and king doesn't like shims on their products.
Can you use those with a spacer lift?
What size spacer? What are you trying to accomplish
@@Apexoffroadpower 1/2" lift to a 3/1.5 lift kit
Yeah you can but I would consider swapping out for actually lifted struts/shocks/coilovers.
@@Apexoffroadpower thanks my man
@@Apexoffroadpower where is your link for the spacer
How can I purchase 3 shims for my 2018 tundra it has a leveling kit on it It’s Level to 3 inch in the rear 2.5 front. I believe theis shims wil level my off to 3inch in front to match the rear 3 inch rite ! I would like to purchase Asap Can you send me a link where to purchase
apexoff-road.com/products/apex-off-road-strut-shim-top-plate-for-07-2021-toyota-tundras-sold-individually
Thanks. !!! 1 ? I have 3 inch lift kit on 2018 tundra , it’s like 2.5 front and 1 in the rear !! Will the shims Work with the lift kit Like you described 2 driver side 1 passenger Im only installing the 5100 on the rear Will the shims work on this type set up !!
Im looking for that full 3 inch level
Email me anthony@apexoff-road.com
I sent a email but it reject me for some reason 🤔