Garmin Visual Approach Guidance Demo
2018 ж. 21 Сәу.
29 541 Рет қаралды
Visual Approach Guidance on a Garmin GTN 750 connected to a King KFC 150 Autopilot.
Panel by: www.sureflight.com
Visual Approach Guidance on a Garmin GTN 750 connected to a King KFC 150 Autopilot.
Panel by: www.sureflight.com
Thank you for sharing!! Very helpful.
I see the answer to my question was asked down below. Thank you for the answer. It is most annoying and gets in the way when it pops up on an IFR flight.
Thanks for sharing the Visual Approach on the GTN750.
Do you have a GPSS/NAV switch? What mode were you in during the various flight phases (HDG, NAV, APC)? When did you engage "approach" on the autopilot? After getting on the magenta line? If before the magenta line were you flying in HDG of NAV mode? Thanks for posting this video.
The autopilot has the NAV/HDG button which I put in HDG mode. While in HDG mode the G500 primary flight display has a GPSS/HDG switch. I am generally flying HDG mode on autopilot and GPSS mode on G500. I remain that way until the aircraft is turned inbound on final and the approach is activated. Then I put the autopilot in APR (approach mode) to fly the approach.
@@RMAG thanks
Every helpful video but it cook be very hard the touchscreen on a bumpy day thnk you for sharing fly safe
At the 2:11 mark you activate the approach. Could you , since you have a magenta line, just hit "approach" on your autopilot when nearly on or quite close to the magenta line? I'll flying today and try this.
Yes
On the 650 and 750 the visual approach will automatically appear in the lower left, without me selecting it from Procedures. I have yet to figure out how to disengage it from automatically popping up. I assume the option to cancel or disable it would be in the Procedures page?
From the map page you hit Menu/Map Setup on the Map tab hit the “Visual APPR Selector” button and choose “Off”.
How do you get the visual approach off? It keeps popping up and I don't want it there.
Page 9.1.2.1 of your manual. At your map page hit Menu, Map Setup, on the Map tab select Visual APPROACH to Off.
What angle of intercept do you need to be to capture the final approach course? Sometime when I activate it flies the wrong direction!
I’ve successfully captured it at a 90° perpendicular angle.
@@RMAG in nav mode or hdg? Are you using vnav as well in the sequence?
@@nxfedlt1 the other day when I captured it a 90° I was in the pattern and extended for a long downwind and was hand flying. When I saw the VDI appear and I was under the glide path, I hit The APR button and it intercepted everything. I have used NAV mode, heading mode, and VNAV in the sequence as well with no problems. You just need to use common sense you cannot activate this and use NAV mode when you’re flying at it from the opposite direction or something.
@@RMAG I think that's my issue. I've tried it in the opposite direction like on a rnav and it doesn't fly me to the v3nm wp.
@@nxfedlt1 yeah that won’t work.
Hi I fly IFR with my GTN 650 Garmin and the visual approach ICON pops up on my map screen automatically and obscures the name of my next fix. How do I turn that off? Thanks for your help. Scott
From the Map page, press the Menu, Map Setup, in the Map tab “Visual APPR Selector”, choose off.
Not very useful video. Cant see what happened on activation. Did it track to the 3 dme vdp?
It essentially works the same as an RNAV GPS instrument approach except it hasn’t been surveyed by the FAA or approved for a legal IFR approach. All it does is create a straight line extending out from the runway laterally and a 3° slope extending vertically out from the runway. You intercept it the same as a GPS approach. There is no VDP it is visual guidance only not does not guarantee obstacle avoidance. There is a advisory waypoint put at 3 miles from the runway.