How to add an electrical outlet ANYWHERE
in this Video I will show you how to add an electrical outlet anywhere you want. If you need to add an outlet where there is not one available, follow these simple steps and you will be able to add an outlet all by yourself.
********CLICK TO SUBSCRIBE******
kzhead.info...
-------- Tools and Parts Used In This Video -------
Circuit Breaker Finder: amzn.to/3JPnSCD
Wire Stripper: amzn.to/2vJwUPw
Circuit Tester: amzn.to/34LjAZJ
Digital Multimeter: amzn.to/32FVZY5
New Work Outlet Box: amzn.to/3h3xBEA
Outlet: amzn.to/3i4TJ2L
Romex Elecrical wire: amzn.to/3WE1scE
Stud Finder: amzn.to/2DwtJOQ
Stud Finder: amzn.to/2QXnmXV
Drywall Saw: amzn.to/35aKHOe
Makita Drill: amzn.to/3lW6387
0:00 Start
0:21 Intro
2:30 Locating The Studs
4:51 Finding the power source
6:23 Running the wire
7:27 Installing the New Box
10:15 Wiring the new outlet
13:49 Connecting to the power source
14:42 Finalizing Installation
15:09 Outro
--------Cameras and Gear Used To Shoot This Video ------
Nikon D750: amzn.to/2VUxXGV
iPhone XS Max: amzn.to/2Iu4Ty6
Canon VIXIA HF R800: amzn.to/33aZeqg
iPhone 6 Plus: amzn.to/3cJEmKX
Neewer 660 Light Kit: amzn.to/2v6zkqW
Neewer Dimmable Light: amzn.to/2VZiiWW
BOYA M1 Lav Mic: amzn.to/38CXKpR
BOYA BY-WM2G Wireless Mic: amzn.to/2vQVw8T
DJI Osmo Mobile 3 Gimbal: amzn.to/2xj08F6
JOBY GorillaPod Tripod: amzn.to/2TyxwAm
Tripod: amzn.to/2vRhxEA
-------FOLLOW MY CHANNEL------
Facebook: facebook.com/deaninityourself
Instagram: deanin_it_yourself
#DeaninItYourself #ElectricalWiring #OutletsandSwitches
DISCLAIMER: This video and description contain affiliate links, which means that if you click on one of the product links, I’ll receive a small commission. This helps support the channel and allows me to continue to make videos like this. Thank you for the support!
Best video I’ve seen on how to add an outlet.
boy your easy or gullible the video says anywhere ?? it was not anywhere it was by a other one
Don’t kid yourself dude. As an electrician it scares me what these diy videos can do. Let’s just do it right is all I ask from him. I don’t need to bash on his videos.
There are just so many bad things here, I am not sure where to start.
Knock sue cow.
@@kerossit like what??
A few comments: 1) As others have noted, a warning to turn off the power before you work is not wasted. 2) Those push-ins are one of the most common points of failure on outlet installation. It's not against code to use them, but best practice is to bend the wire into a J and hook it on the screw on the side of the outlet (with the J terminating in the direction the screw tightens. 3) It's also best practice to join all the wires of each type together using a wire nut and fold them into the rear of the box. Then connect only one set of wires to the outlet. 4) Finally, and this may be a code violation depending on your locale, you shouldn't just drill a hole in the back of the box. You should replace the box and pass both sets of wires through those strain-relief panels at the back.
So the wires from the new outlet should have been tapped into the wires from the existing one by cutting them and joining them with wire nuts right before the connection to existing outlet? As opposed to what he did, attaching the new wires to the other side of the existing outlet?
The "old" outlet was cracked in two places. It should have been replaced.
@@Ventura727 Correct. Using pigtails ensures current flowing to the downstream outlet does not flow through the original. From a continuity standpoint what he did works, but it is not a 'best practice'.
@@stevefrawley9756 thanks for the tip. I'm looking to install an outlet outside and I'm looking for the best way to do so.
Thanks!
Anywhere you want as long as it's direct behind another outlet on the other side of the wall LoL
Yeah ANYWHERE is in all caps lol
I mean you can run it thru the wall if ya wanted but then there would be some drywall work. My mom could do what this dude did
Thinking the same thing
Also the amount of outlets already available (usually) is based off what size breaker it's landed on (15 to 30amps usually) . Keep adding outlets on the same run/leg and you'll be popping breakers in no time when you try using something. Your wife will turn her curling iron on and pop! She's left in the dark, little Timmy's fortnite match gets cut off, and now your getting yelled at and have to get up to fix it because you played electrician.
"I don't really care so long as it's in this area here." 🤣😅😂
1) In many places it’s against code to have an outlet in a clothes closet. 2) Do not drill a hole in the back of a device box. You need to have proper strain relief. 3) Don’t use push ins on the back of a receptacle. Use the screws. They’re way less prone to failure which can cause a fire. 4) Don’t put 2 wires on one screw like he did with the ground wires. Pigtail them and land 1 wire. 5) Strip more jacket off the wire. Leaving 3-4” in the box just takes up space. 6) Shut the damn power off BEFORE you start. As a master electrician I don’t really have issues with DIY’ers if they do it right. This guy has zero business trying to show people how to do this. He’s very obviously not trained or qualified.
What he said.
I have zero experience in wiring homes and even I knew this video was sketchy and had to check the comments. Thank you for clearing things up
@Mike Tee Not where I am. Unless it’s a hole that you can put some sort of strain relief in.
@@billfarnsworth2661 I don't know where you are, but they used to sell blue plastic boxes in Alabama, and before that, brown ones with knockouts. These had no clamps. You just poked the wire through the hole. Personally, I preferred metal, though.
@Mike Tee I’m in Canada. Any device box we use has to have a bonding means. So we can’t use the blue Carlon boxes. We can use grey Nu-Tec boxes that have a bonding strap in them. They have a built in strain relief that holds the Romex in place.
Finally a complete and comprehensive breakdown how to properly install an outlet
Let me first use this metal drillbit to drill just inches away from a live outlet and into a outlet box that could have another live wire behind it in the wall. Now that I drilled it, let me turn off the power!
LOL I just saw that as reading your comment. I was like "WTF?!"
@@Dtyler171 Always turn off the power when working with electricity.
@@RC-ld3cn yes...
I'm waiting for his next video " how to install an electrical outlet under your running shower"
Wow!! What a clown!! 🤡 The title of this video should be “How not to add an electrical outlet” I agree with “Sonyguyus” 🤔🙄🙄
‘Now that I’m back in the closet, I’m gonna see if I can locate that stud.’
Lol. Touché
@@DeaninItYourself chichimon
Gottem 👏👏😂🤣
😂😂😂
I see what you did there
Thank you for posting this! I had to add a box and outlet since our old dishwasher was hardwired to the main wire coming out of the wall. I was shocked how easy this was to do. I bought the necessary components and, much quicker than expected, installed the box and outlet. And boom, when I switched the breaker back on, it worked!
This is a great video for me… I have a project where I want to make a floating PC desk setup with “floating” desk and monitors and I need to do this same thing to the outlet under my desk so I don’t need to show an extension cord going from the outlet under my floating desk to the bottom of the desk itself. So I will be doing this to put an outlet right under my floating desk attached to the 2x4 that mounts my “floating” desk to the wall. I will also be running the cords from the PC through the wall to the monitors so it has little to no cables exposed. Couldn’t do it without this video. Thanks 🙏
One very important thing you failed to mention, shut the power off to that outlet or room from the circuit breaker box, always shut the power off, good step by step instructions
I agree with some of the comments 1. You left to much outer wire insulation on the wire coming into box 1/2-3/4 inch all you need 2.pigtail your grounds 1 wire only on ground screw 3. Use screw side terminals for your white and black wires make a loop and hook in direction of tightening screw 4.outlet plate was cracked in middle -replace 5. Power continuity is suppose to pass through the circuit or wire not through the device pigtail the hots and neutrals 6.your leaving to long of wire in box in some boxes that could pose a problem 6 inches out from box
I didn't realize they eliminated all electrical codes!?!?! That's awesome!!!
Codes? More like guidelines amirite
I accidentally came across this video over a year ago and the comments were so funny that I decided to revisit the video again here in October 2023. The comments just keep on coming! I know that this is dangerous with this man is doing and how he’s going about it, and I hope people will read the comments seriously but, really, this video is inadvertently and also purposely a great source of humor. Now, everyone stay safe in DIY jobs.
You need to know what else is on the circuit you are connecting to. You cant just keep adding stuff . Overloaded circuits will either trip breakers or cause fires. OR BOTH !
Very well done video on what NOT to do. Next video will be " How to put out a closet fire with a garden hose!"
Stay tuned.
You can do it!
Zoom, zoom, zoom... right over his head!
@@DeaninItYourself he mentioned fire cause what you showed to do is not safe and will start a fire 🔥 and hire an electrician
@@danielw1985 He should rename the video, “how to go up in flames!”
This guy is an Insurance company's dream! If ever a fire 🔥 they will never pay-out once inspection determines cause!
Wow, that was actually really easy if you get lucky and have an outlet nearby. Thanks for the knowledge.
Be careful of receptacles in closets. We were working in a house when the owner said she had an outlet in the living room that quit working a long time ago. We removed it and it was tightly connected but was dead. From the location of the wire in the box, it looked like it might be jumped from a box on the other side of the wall. When I looked there was a closet that had been added to the room years before that enclosed the existing outlet. The closet was full of cardboard file boxes stacked against the wall. When I took them out, one of them had turned brown from the heat from the receptacle. When I removed it, it had a loose hot wire that had been arcing for a long enough time that it destroyed the whole side of the receptacle. The hot wire was pitted from the arcing and it was just luck that file box didn't catch fire. NEVER cover a receptacle with stuff that is seldom moved. If something goes bad you may never see it until its too late.
I’ve never seen an outlet in a closet before.
Probably there was a short circuit in other outlets in connection with the outlet on the closet
@@ds99 It wasn't originally in the closet. The closet was built around it some time later. As I said in my original post.
@@blass5506 No. The terminal had obviously loosened on the hot side and had been arcing between the terminal and the wire for some time causing the wire to become pitted and thinner from burning off material. No short. No wires weren't touching and the breaker had never tripped. There was never a short in the system. A short in a different outlet wouldn't cause another one to get hot and burn up.
Great advice there!!!!👍
I have the same stud finder. I love it. It's not only the cheapest stud finder you can buy, but it's also the most accurate. When it sticks to the wall, you know there's a stud behind it. Great video!
I have one like that also, too bad the guy who built my house used screws/nails sparingly, most of my drywall is glued on with only 2-3 screws in a 4x8 sheet
Note that he is using two different types of stud finders. Which one do you love?
Hi, I am the first to admit that I am rubbish at this sort of thing, so I thought why not learn something that might come in use , However I don't think I have ever heard the word ' OUTLET' repeated so many times in such a short period of time before any action took place I was starting to lose the will to live so I switched of. This video proves the reason for the phrase 'less is more'
My dad was an electrician. I was helping him one day as a teen by stripping the outlet and switch wires and installing them. hehe He got a call to come back out..I had stripped the wires too much and when Id shoved them back in the box the wires on some had touched each other and tripped the breaker on that circuit. He had to pull them all to find the ones touching. Learned my lesson that time. Guess he learned to watch me more closely too :)
You shouldn’t backstab (use the push in holes) they tend to loosen over time. Best practice is the use the side screws.
Sign of a lazy electrician.
@@leeallen7964 yep, my best friend was an electrician and he said the same thing.
Good to know. Thanks
@@leeallen7964 he’s not one
@@johnjoy423 that's very obvious
Great video thanks but be aware you are not allowed to put two wires under the same screw as you did with the ground. It needs a pigtail or a green wirenut passthrough. Also it is recommended to use the screw terminals rather than the push-ins as those give a much stronger longer lasting connection.
Good point about the green wire nut, also known as a "92 Greenie" or Grounding Connector.
Glad to see you learned something from watching this video👍 Now go add an outlet!
I thought the same, am not an electrician by no means, just thought it was weird. Now to find a video for what you said...cause I want to see that
I am planning on doing something like this. How can I do this using wago connectors or must I use the greenies?
@@mcardenas23 the greenie is just a convenience. You can either use wag or twist connectors with a pigtail to the ground
Thank you for the video. I did learn something. I liked the stud finders you showed. I am not 100% sure, but you could probably have an electrician do this for under $100.00. All the tools you list, come to about half that cost.
Thank you so much for your video, this is exactly what I was looking for to help me with my next project ...BRAVO !!!
Do not do anything offered as advice in this video other than gathering the tools to do the project.
Goddammit, your theme music woke up my entire house.
I enjoyed the part when he drilled a hole in the electrical box before switching power off at the breaker.🤡
Yeah I noticed that too. 😆
Hahaha
Also didn’t bother leveling it.
That is really funny...and the surprised clown. Oh boy. I'm falling over because I'm laughing so hard.
Iv rarely shut the breaker off to do a basic job
Excellent video. Definitely will be checking out more of your videos. I want to install an outlet in the closet to install a rack for my network switch, router, and modem. Thanks so much.
Glad it was helpful!
The lil screw finder magnet magic stud finder was the real gem in this video.
Lucky for us, he picked the easiest scenario! How helpful …
pulling the wire to THAT location is the hard part- The installation is easy. Sometimes you do not have a Back wall with an outlet conveniently placed for you. .
Great job! This is exactly what I need. Thank you so much.
I’m a big DIYer but anything dealing with electricity I leave for the pros. There is so much he did wrong here, and how ppl are going to watch this and replicate his mistakes.
Well Bill Farnsworth certainly gave you a piece of his mind. I'm guessing he's an electrician. In general however, I thought you did a great job. Thanks for sharing.
He has to be a electrician downing someone else work . I guarantee you he doesn't do as well. I back track my so called professional electrician and found that he did not use cable clamps and just left wires laying in the attic cause he thought I wouldn't check his work. Educated yourself are they will take you for a ride and leave you in the desert.
@@starlondon7547 When I have professionals doing work at my house they always criticize the previous job done by someone else.
@@hphinn , Yep most are no more that bitching ole biddies
Drilling the hole in the box violated its listing therefore violating NEC. When you cut a hole with a drywall saw, get a small box with a lid. Open the lid and tape it to the wall below where you are going to cut the hole. Happy wife, happy life! No mess to clean up!
Is the box you drilled a hole in made of plastic? Doesn't that still violate code?
First of all whats wrong with the ground?, do you mean he did not use a wire nut and pigtail out with just one wire? yeah I agree but is ok is his house and is not a new construction home, second of all the debri? Well he probably vacuum the dirt and all and his wife is happy for installing the outlet.
Thank you! I bought a new dishwasher with a plug to replace one hard wired. I was able to install an outlet to plug the new dishwasher in with no problem.
First time I came across any of your videos. I am definitely going to subscribe because I live in and old house and there are only one outlet on all walls, some have zero and this will definitely help the extension cord problem. Am going to look at more of your videos and see if I can use any more of them. Thanks
Thanks for subbing! I will definitely be doing more DIY electrical and home related stuff. Stay tuned.
That's a scary thought.
@@betford2 🤣
I am not an electrician but two things to do differently: if an outlet is cracked, replace it. Also never put two wires on one screw (ground screw). Use a wire nut and add a third ground wire (pig tail) to connect to the outlet.
I was going to say the same thing. lol
If we are looking at the same thing, what I first thought was a crack turned out to be paint on part of the outlet (it matches the wall color)
Intro music: volume level 200 Video audio: volume level 10
I'll follow you great explanation that an easy task you find and create a wall electric outlet. Thanks 👍
This is an excellent video! Many thanks!! Subscribed. 👍👍
As someone who's actually been shocked by a 20amp circuit and generated an arc that resembled ball lightning in his dinning room, be sure to turn off the main switch and not just the breaker. If someone didn't wire the neutral properly then you can be the lucky victim that becomes the ground.
Are you serious? How about shutting down the whole city power grid?
@@sc2008 It’s easier to shut off the main than it is flip a breaker.
yeah,i always throw the Main at the meter............
A Hair Raising exspirence
Getting shocked from a 20A circuit or a 15A circuit makes no difference. The input voltage (120V in your case) and your physical resistance is all that matters for shock value. If you are getting a "ball of lightning" ( I doubt this is the case, I bet you just got scared) the breaker did not trip fast enough on the dead short. Don't exaggerate and spread misinformation.
turning the power off at the breaker should be the first thing you do before you remove the receptacle from the wall. 120v can easily kill you. Please be safe people.
WOW!! Your closet is bright!!
My favorite part was when he said, "note that im back in the closet im going to locate that stud"....wow lol
"ANYWHERE"? He showed how to install an outlet in the easiest possible location. Most installations require much more work: longer wires, going through studs, new connection to main breaker panel, etc.
I like to imagine he just adds dozens of outlets and switches to the blank walls of his home every day
That's what I hoping to see was a more complex problem. This video is okay for a simple do it yourself common sense job.
Yes, adding a plug can sometimes be in the range of several hundred dollars. Especially if cutting holes in drywall is required.
And climbing in the attic or under the house. Yeah bet he hasn’t don’t that!
@@chuckmckee2741 go make a video then, if you want to complain... people today on the net, are always whining.
So why didn't you fix the old socket since it was out already. It was cracked??
Best video I’ve seen on how to add an outlet.
Very good. I think I can actually install a new outlet...in my closet. Thanks for a great tutorial.
Go for it!
In new construction we electricians never instal outlets in the closet unless the owner of the house wants it and is brought up to the inspectors attention , In walk in closets Mostly just lighting and an occupancy censor (title 24) you rarely need an outlet in the closet, But of course if you're the owner of the house you can do whatever you want to it.
@@elguapo8751 Well that was back then and for the same reason we don't install a subpanel in closets or inside bathrooms any more, Fire hazard, Is against code, per NEC2020 and NFPA , unless maybe that particular receptacle is dedicated and is GFCI or AFCI protected, Or both, but not connected from a jumper receptacle from the next room or hallway power.
no you cant. you must follow your local electrical code. in ontario canada receptacles in closets or cupboards are not allowed. feel free to be a dumb ass like this guy
You provide some really useful information but, as previously pointed out, you need to modify some installation tips (ie. ground wire and mention replacing the cracked outlet) Really, i'd pull the video down and repost once you've completed the edits. GL
Wow wonderful and simply the best.
Great video! Thanks! 👍
As a Red Seal Electrician I would first ensure that the circuit you're piggybacking on is not in full use. On a 15 amp breaker you can have no more than 12 plugs or lights or a combination of both. Failure to do this could result in nuisance tripping of the breaker or fuse. In order to test for this you would need a circuit tester. It's used at the distribution panel at the breaker or fuse in question. Folks you should always call a certified electrician for this type of work. Doing it yourself could lead to a fire.
Just curious, when you say 12 plugs, do you mean 12 outlets, or 6 outlets with 2 receptacles each? I was gonna comment on his procedure, but as soon as I read a few of the comments I could see there was no reason to. Hahah.
@@ssacra22 It's 12 outlets allowed on a 25 amp circuit. Or 12 devices. That includes lighting circuits as well.
@@jacktufts4712 Thanks for the info
@@ssacra22 Sorry that was supposed to read 15 amp circuit.
@@jacktufts4712 I kinda did the 'assumption thing'. hahaha. Thanks.
His friends were shocked to discover that he's not a very good electrician!
Excellent. Video! Thank you!!
Super helpful! Thank you!
I'm no electrician but I knew there were going to be critical comments in this section.
This is not “Anywhere”
@@JKHTX I want mine inside my clothing dryer! The part the spins preferably.
@@JKHTX you do that and you’ll get culo shock
@@JKHTX 😆 hopefully it's gfci protected....
well.... you an put outlets anywhere.... doesn't mean it had to work or it's up to code. 🤣
Intelligence. It's not for everyone. (If you don't possess it, stop watching DIY electrical videos.). Ask yourself, why am I here? Good luck.
You’re my role model. Handy and awesome shoe game.
Very helpful video. Thank you.
This may seem easy the way he describes it. Word of caution: If you put in an additional outlet and a fire breaks out in your home and your insurance deems the outlet was the problem they could deny you coverage based on the fact that the outlet wasn't installed by a certified electrician to ensure that NEC code was followed. Do this at your own risk.
I am not an electrician, but I know it’s dangerous to be pulling out a plug without turning off the electricity!
It’s Do able . But I’ve seen electricians that do and don’t . You just have to be careful with wiring . But it’s recommended to shut off the breaker
It's all about comfort level. Just like a gun can kill you that's why we don't run around with our finger on the trigger.
@@zer05tar exactly
Everyone must shut power off before doing this work. Pros and DIY’ers alike!
@@vincentstark480 I agree I agree
Great video, very descriptive. I learned allot
I’m glad I read through the comments bc I was about ready to do this. Is there a better video on doing it or do I just pay electrician?
SHOCKING!!!⚡️
M.A.G.A
Simple when you’re doing a back to back box. Totally different story when you wanna run wire for a new outlet on another opposite wall
Totally!!
yes, exactly what I thought.
Use a Wifi outlet
@@midnightrunner684 that's great if you have Wi-fi.
@@midnightrunner684 a WiFi outlet? Curious how WiFi gives power to an outlet?
Explainable. Thanks for sharing
Typically wall outlet boxes are nailed or screwed to the side of the studs; if you remove the outlet plate, you will see the nails or screws attached to the stud, and a stud finder is not required.
Yes those are used in new construction. If you have existing drywall (old construction) you use a winged swing gang box that fastens to the drywall. Unless you wanna tear open your wall for no reason.
@@ChrisJohnson-fs4fz Ever since the invention of the first Flush AC power plug and socket by Harvey Hubbell in 1906, the housing supporting the power plug was a metal wall outlet secured to the buildings hand hewed timber framing or wood studs.
@@garysantos7053 welcome to the new millennium Remodel boxes attach to the drywall and are used for finished walls
You can't hook two grounds to a outlet you need to use a pig tail.
I was thinking the same thing on that part. Other than that (and cutting the power a little late) it was an awesome tutorial.
Yes you can it's the same thing it all goes back to the panel
Theoretically you can, however pigtails are the standard nowadays.
@@thomasdominguez8421 I believe NEC code only allows one wire under each screw .
@@thomasdominguez8421 - Don't say YES when you know nothing about electrical wiring code. You can't put two or more wires under the same screw. That's why a pigtail is required. Bye, idiot!
Awesome Video! Thank you
anyone can do it after this video, excellent strategy without damaging wall and explanation
What's really scary is the amount of people who watch and follow these videos. I can only imagine the amount of dangerous completed projects out there, hidden behind the walls or underground. Waiting for the next home owner or occupant. I've worked in the electrical field for over 25 years and have seen and heard plenty. The lack of respect for something that can kill you or others is staggering. Not to mention working on something with little to no knowledge. But hey, KZhead to the rescue!!!
Great video! Can you run romex up the wall into the attic and tap an outlet up there or run romex up into the attic and then back down into another section of the wall that has an outlet? Not sure what the codes and safety standards are
You are asking this guy about codes?!?! FFS
You want to keep it on the same circuit of the room but Is ok how he did it, you don't have to go up and down, Just to the nearest power witch on this case was his room outlet, is ok just a few minor things that I would have done different.
What if there’s is fiberglass insulation between the wall and the outlet you want to tap is on the other side? Can you just drill though the paperback on the insulation or what is the best process for that?
Thanks men .god bless you 🙏
Very detailed explanation, electrical is the one thing I am very wary of!
Please don't do what this guy did. This is a very poor example and contains several code violations.
You should have replaced the first outlet with a new one, it was cracked
I knew, there must someone like me who thought the same thing. So came scouting for this comment. I agree, dude you should have done it while you were at it. Anyways... do it now ... hehehe Thanks for awesome video though.
Tsk Tsk...i hope you replace the outlet on the other side of the closet. Sheesh. Also, when you joined the ground you should have twist-tailed the ground and cut one of the ends to connect to the ground post on your switch. You stacked them then screwed them down leaving a gnarly wire mess to stuff back into the wall. You also said when testing the outlet you were looking for 110v. Wrong. When testing for a hot residential outlet in this case it should have been and was 120v...smh.
@@WolfieLovesDaddy that can depend on where you live, and the Power company you have.
@@tluns810 what the hell are you talking about? If he is in north America he is supposed to be at 120v.
@@WolfieLovesDaddy I didn't mean to make it sound like a night and day difference. I was referring to the +/-5 % tolerance allowed. Some locations may read as low as 110V or has high as 120V, but always can be somewhere between.
The tab is tight to act as a strain relief.
Yes but what about the other side.....
Excellent video! Thanks
I did this in my appartment. The other side of the wall is someone else Receptacle. Cheers.
EVEN better--- that receptacle goes on THEIR electric bill! Plug in the electric heater!
I can see this guy's brain cogs turning in super slow motion.
You did not tighten the screws on your new outlet. You added tape to only one of the 2 outlets, why? Your original outlet is cracked why not replace it.
I thought it was cracked. But it seems like it's gray paint like the wall. Video is misleading. He's just adding a outlet on other side of a walk not anywhere. It's dumb.
amen. such a hack. he got the job done but not to code
Damn that outlet nice lil sneaker collection.
Helpful. Thank you.
Share this video with all the major insurance companies out there. I’m sure it will help the adjusters 😂.
Stop.. your not an electrician don’t listen to this guy people
You're *
he has no limit, leave him alone, leave with no limit, example: flying, shapeshifting, teleport.
@@tueresdios3453 right on
Handy man special, best to call a real spark
Great job, thanks
at 5:00, he forgot to say "stop and turn off the power! now you may proceed."
I don't think he forgot to say it. He just has no idea what the actual fuck he is doing.
Does he also need to tell you to drop your pants before you drop a deuce? A little common sense goes a long way. Guess this video was way too advanced for some here.
@@vitaminb4869 You say that, but they guy literally started drilling with power on. That's like giving a tutorial on how to drop a deuce and then not dropping trou before evacuating. Yes, I thought we could proceed under common sense, but then he subverted my expectations by doing what he did on camera...
@@extantsanity so what if he drilled with power on. The wires were covered, so he had no chance of touching the hot wire.
@@vitaminb4869 Do you... not know what drills do?
I would have replaced the box and fed Romex through push in connector instead of drilling a hole. Also would have replaced cracked outlet. You didn't properly cut the sheath at the other end. It should be as close as possible to the push connector. Push wires into box by folding bottom to top back to bottom instead of shoving them in.
Hell the nut ran the drill to make the hole then said now we should shut the power off so we don’t get shocked. I said don’t worry it will help him if he does.
Very important. The size of the wire you run to the other outlet depends on the size of the wire already used on the existing outlet. Just by appearance it looks like the outlet had 12guage wire and the white new wire is usually white. I can't confirm cause I would have to see closer but you always want to match up the guage cause if you undersize the wire it will heat up and can technically start a fire
Very good video and careful narration. Great!
*Always, ALWAYS disconnect power before messing with any electrical outlet.* Some people know what they are doing, and they don't disconnect power at the circuit breaker. But it's still a risk.
I would have replaced that outlet as it has cracks.
I plan on doing another video about that. Thank you for the comment.
Please don't I'm a licensed and certified electrician and literally everything about this video is just extremely dangerous and doesn't follow any electrical code at all. You are literally going to burn down your home or kill yourself 100% absolutely one of these things is going to happen. Please stop and don't make anymore electrical videos please.👍✌
@@raventhelabrador2665 I was looking for a comment like this. Thanks
That was helpful. Thanks!
You made it easy to understand
Good job my Guyana friend!
I would not trust this guy with a pencil 🤣🤣🤣
Great job 👏
God bless you sir!