KZhead
Тәжірибелік нұсқаулар және стиль

Infinity Cube Table

Jonathan Katz-Moses
2024 ж. 24 Мам.
1 614 860 Рет қаралды
Жүктеу

Support What We Do at The Katz-Moses Store kmtools.com
This week’s woodworking project is the Infinity Cube. I found a really cool way to cut the bridal joints without having to resent my equipment. Using only MDF and minimal measuring, this can cut repeatable bridal joints over and over with ease. I really can’t wait to see what you create! Let me know what you’d like to see next. Thanks for watching! Please like, comment and subscribe. Cheers!
----
*Check out OUR BRAND NEW STORE for tons of great Tools and Support the Katz-Moses Woodworkers with Disabilities Fund*: KMTools.com
Buy the Katz-Moses Stop Block: kmtools.com/collections/stop-...
Buy the Katz-Moses Magnetic Dovetail Jig: kmtools.com/collections/dovet...
*Buy the Katz-Moses Woodworking Apron*: kmtools.com/collections/workwear
----
Taytools is my favorite woodworking tool source: lddy.no/e90a
I have Walnut Slabs for sale: kmtools.com/collections/walnu...
BitsBits is the BEST place to buy router bits: bit.ly/BitsBits USE CODE JKATZMOSES15 for 15% off
Total Boat Epoxy: bit.ly/30bA39o 10% Discount code JKATZMO
----
Essential Woodworking Skills Playlist: • Essential Woodworking ...
----
Woodworking Routers Video Playlist: • DIY Router Table Build...
----
Woodworking Joint of the Week Playlist: • Woodworking Joint of t...
----
Woodworking in SLOW MOTION Playlist:
• Slow Motion Woodworkin...
----
Tool Tune Up Thursday Playlist: • Tool Tune Up Thursday
----
Check me out on social media:
instagram.com/jkatzmoses
www.Facebook.com/katzmoseswoodworking
patreon.com/katzmoseswoodworking
/ katzmoseswoodworkingshop
----
Tools I love:
My Apron: kmtools.com/collections/workwear
My favorite Dozuki dovetail saw - shop.kmtools.com/dozuki
My favorite Ryoba saw - shop.kmtools.com/ryoba
Marking Gauge: shop.kmtools.com/dbmk
Marking Knife: shop.kmtools.com/dbmk
NEW Suizan Flush Trim Saw: shop.kmtools.com/flush
Narex Richter Chisels: lddy.no/ussg
Knew Concepts Coping Saw (best deal I’ve found): lddy.no/120mz
Dewalt Planer Package: amzn.to/2thEf6O
CMT Chrome are the Absolute Best Table Saw Blades (JKM10CMT for Additional 10% Off)- lddy.no/ggf9
Great Small Tape Measure: lddy.no/120n2
BLEM Combination Squares (high accuracy and value at a fraction of the price due to cosmetic scratch): lddy.no/120n3
The ABSOLUTE best Sandpaper on the market: lddy.no/10ucv
Dewaxed Shellac Flakes: amzn.to/2FeqqYh
5 Minute Epoxy 10% Discount code JKATZMO: bit.ly/30bA39o
2:1 High Performance Epoxy 10% Discount code JKATZMO: bit.ly/30bA39o
Dewalt Trim Router: amzn.to/3Ay6c7D
Dewalt Full Size Router Kit: amzn.to/3FH8Njp
Dewalt Planer: amzn.to/2YSkpiS
Bosch 1.25 HP Colt Router: amzn.to/3DzNjmF
Bosch Edge Guide: amzn.to/2uRRKs2
Bosch Bushings Set: amzn.to/2JUNRYb
Centering Cone: amzn.to/2OjgOAf
MY CNC MACHINES (I highly recommend both)
Bescutter Laser’s Website: bit.ly/bescutter
Avid CNCs of all shapes and sizes: bit.ly/3cdKdqA
----
Camera Gear:
Lumix GH5-s and main lens: amzn.to/2J49F7m
30mm Macro Lens: amzn.to/2GJXtTT
15mm Lens: amzn.to/2NafUox
50mm Lens I use for product shots: amzn.to/2mehs5y
Microphone: amzn.to/2IGjKIa
Lav Microphone: amzn.to/2Nb8SzY
Gimbal: amzn.to/2s9ZV0F
2nd CAMERA Canon 70d: amzn.to/2FiCEDq
Tripod: amzn.to/2HasNvK
Slider: amzn.to/2oNucSd
24MM Wide Angle/Macro Lens: amzn.to/2oSzzjh
50MM f/1.8 for those tight shots: amzn.to/2tpAoVm
10-18mm Lens for the wide shots: amzn.to/2FZrhNM
Musicbed SyncID:
MB01UPHIXWOBRZ2

Пікірлер

  • Get the Free Cut List and Plans/Cut List here - bit.ly/InfinityCubeCutListPlans My friend at Everything Wood and Metal has a great cube calculator if you want to do a different size than I did. Check it out here: bit.ly/InfinityCubeCalculator BitsBits is the BEST place to buy router bits: bit.ly/BitsBits USE CODE JKATZMOSES15 for 15% off

    @katzmosestools@katzmosestools4 жыл бұрын

    • Jonathan Katz-Moses I’m first to ay hello!

      @robohjhonson3711@robohjhonson37114 жыл бұрын

    • I've gotten several orders from Canada today. Should be working.

      @katzmosestools@katzmosestools4 жыл бұрын

    • Jonathan Katz-Moses my error. Thanks 😀

      @PaulChandler1951@PaulChandler19514 жыл бұрын

    • Build a second cube using the kawaii tsugite wood joint.

      @hobesoundman8246@hobesoundman82464 жыл бұрын

    • En tenon mortaise on ne verrait pas de différence de teint ...

      @arnaudamourette3342@arnaudamourette33424 жыл бұрын

  • Cale kralj

    @lukamijovic275@lukamijovic2753 жыл бұрын

  • This is a valuable addition to my woodwork collection kzhead.infoUgkxkNYRBJuiJ6EwD-tQSAlxg0eFKsnR2cgz I still will rate this woodwork plan as the best in my reference library. It always seem to stand out from the rest whenever you go through the library. This is a masterpiece.

    @user-ri3sz5js6o@user-ri3sz5js6o Жыл бұрын

  • You sir have created a piece of art 🖼

    @o.g.bwoodwork@o.g.bwoodwork4 жыл бұрын

    • Muchos Gracias!

      @katzmosestools@katzmosestools4 жыл бұрын

    • Jonathan Katz-Moses de nada 😉

      @o.g.bwoodwork@o.g.bwoodwork4 жыл бұрын

  • @Caletova Radionica best infinity cube

    @davudinho23@davudinho233 жыл бұрын

  • @caletova radionica

    @martz5533@martz55333 жыл бұрын

  • Great video. Makes me want to go try it and I have never tried furniture grade objects before.

    @rogerherrick8323@rogerherrick83235 ай бұрын

  • Thank you for this table and the plans, I am just starting to do a shop which I have dreamed of for 50 years. I now have several nice machines and am excited to make some products that I can sell as a way to supplement my income with retirement and enjoy what I have always wanted to do. It is fun to watch what you do.

    @chuckking2357@chuckking23574 жыл бұрын

    • Thanks Mr.. King!

      @katzmosestools@katzmosestools4 жыл бұрын

    • Exactly for me too. Fantastic table and the best looking one I have seen so far

      @Luckyse7en1980@Luckyse7en19802 жыл бұрын

  • I watch many, many makers on yt and this is one of very few pieces i could actually see myself buying. I love it.

    @jm_mort@jm_mort4 жыл бұрын

  • One of the coolest tables I have ever seen. I would love to try this one day.

    @hursteric@hursteric4 жыл бұрын

  • This the kind of table a magician could use! Impressive to say the least. Needs to be assembled in situ so you can transport it.

    @kingrobert1st@kingrobert1st4 жыл бұрын

  • Looks brilliant, it also looked complicated. Hats off to you 👍👍👍

    @taffythegreat1986@taffythegreat19863 жыл бұрын

  • Heath Robinson did a cartoon picture showing one of those. I think the book was called Modern Living. Totally enjoyed this. Birdy

    @lisahodges8299@lisahodges8299 Жыл бұрын

  • Very impressive and cool I got to give it a go

    @dennissmith6824@dennissmith68244 жыл бұрын

  • I honestly haven't found a better use for my stickers than this. The table is cool too ;) Kidding, that table is nuts!

    @JayBates@JayBates4 жыл бұрын

    • Hahahaha thanks for getting high quality stickers. Those are the perfect thickness for shims.

      @katzmosestools@katzmosestools4 жыл бұрын

    • At 1:56, you can see the real use for a JKM sticker.

      @bobt2522@bobt25224 жыл бұрын

    • @@bobt2522 That's a business card. Probably 3 of them. He explained the reasoning behind it several vids back.

      @doubledarefan@doubledarefan4 жыл бұрын

    • Kern

      @ARFINAOFFICIAL_MUSIK@ARFINAOFFICIAL_MUSIK4 жыл бұрын

  • Thanks for the plans! Just got my cube glued up. Everyone that seen it loves it. Thanks again.

    @jasonnewton7953@jasonnewton79534 жыл бұрын

    • Send pics my guy!

      @katzmosestools@katzmosestools4 жыл бұрын

    • @@katzmosestools where do I send pics.

      @jasonnewton7953@jasonnewton79534 жыл бұрын

  • Just ridiculous. You just keep pushing the envelope. Love it.

    @lockcitywoodworks@lockcitywoodworks4 жыл бұрын

  • Wow amazing job.

    @benmakepeace5759@benmakepeace57594 жыл бұрын

  • Excellent...wonderful...fanatic...fabulous....surprise....craftsmanship....fascinating.... Whatnot.!

    @venkitvktrading2315@venkitvktrading23154 жыл бұрын

  • That is beautiful

    @alanthomas2235@alanthomas22354 жыл бұрын

  • Beautiful! I want one.

    @LeskeyC001@LeskeyC0013 жыл бұрын

  • I used to work for a company that sold SGI computer workstations back in the day. The same brand of computer that was used to make the very first Jurassic Park movie. This cube design was actually their logo, and it has a special place in my heart as a result.

    @kimpanattoni@kimpanattoni Жыл бұрын

  • I'm really liking that garage riff goin on in the forward bits

    @mariemacfhionghuin11@mariemacfhionghuin114 жыл бұрын

  • Beautiful

    @ketakipatil967@ketakipatil9673 жыл бұрын

  • It's the Katz-Moses Mobius-Cube! Awesome. I want one!

    @emilylindstrom724@emilylindstrom7244 жыл бұрын

  • What a gorgeous table! Thank you for sharing this build and the free plans you’re so generous this is going on my list of things to try definitely.

    @coloredcaboosecreations@coloredcaboosecreations2 жыл бұрын

  • I really like the added “bits bubbles” while filming. Please keep that in future videos.

    @shanechepren8119@shanechepren81194 жыл бұрын

    • Yeah Marc killed that

      @katzmosestools@katzmosestools4 жыл бұрын

  • I love this brother... now I am making this from 1.5 * 1.5 BOX metal box pipe. thanks for your idea.

    @sjvio7377@sjvio73774 жыл бұрын

  • Great job👍

    @ladislavmelnik6933@ladislavmelnik69337 ай бұрын

  • Amazing job figuring this out! Great looking project

    @reframeyourbody@reframeyourbody4 жыл бұрын

  • That is a great idea.

    @martinschmidt2683@martinschmidt26834 жыл бұрын

  • I am amazed that does not collapse on itself.

    @JFomo@JFomo4 жыл бұрын

  • Looks great!

    4 жыл бұрын

  • This is amazing! I'm just a theoretical woodworker at this point, but if I'm ever getting my own shop, I'm definitely trying this. Very inspirational! Thank you for building and sharing this!

    @Sergey-wg7ne@Sergey-wg7ne4 жыл бұрын

  • Awesome table.

    @bennettibey9498@bennettibey94984 жыл бұрын

    • Gracias!

      @katzmosestools@katzmosestools4 жыл бұрын

  • Your thoughts are amazing

    @hosamhosam6684@hosamhosam66843 жыл бұрын

  • Thank you for the free content. Just bought a slab of walnut this morning to take on this beautiful table.

    @jasonnewton7953@jasonnewton79534 жыл бұрын

  • Like ko gleda poslije caletovog klipa!!! #BALKAN 😂😂💪👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍

    @tarik4426@tarik44263 жыл бұрын

    • Jajajajaj

      @ljubibrat0778@ljubibrat07783 жыл бұрын

    • Malo iskopirao

      @sergejvidovic6249@sergejvidovic62493 жыл бұрын

    • @@sergejvidovic6249 da da haahahaha😂

      @tarik4426@tarik44263 жыл бұрын

    • Cock-a-doodle-doo ... trumpty dumpty had a grate fall

      @davidburns1753@davidburns17533 жыл бұрын

  • That’s incredible,amazing, genius hands , mind and table , great job 😍😍😍😍💪💪💪💪👍👍👍👍

    @TheLoyal76@TheLoyal764 жыл бұрын

  • Хорошая задумка по вырезанию пазов. А так в целом отлично получилось.

    @user-xt4bu9lu5s@user-xt4bu9lu5s4 жыл бұрын

  • Awesome with a capitol Aw!!! Well done, Jonathan. Very nice.

    @harrydavis6903@harrydavis69034 жыл бұрын

  • Super cool!

    @mindsofgreatness@mindsofgreatness4 жыл бұрын

  • The real shenanigans is the clamping hardware you have for this. I especially loved the Swiss Cheese and the 3D-printed "squares" during the earlier part of the gluing step. The best tools are the ones you make your own!

    @merfolkSlivers@merfolkSlivers4 жыл бұрын

  • Awesome! And free plans!!

    @1946jeeplover@1946jeeplover3 жыл бұрын

  • This table with some of your incredible dove tails would set it apart! Very nice work!

    @blackflycanada4943@blackflycanada49434 жыл бұрын

  • Amazing.. I like.. that's our family job

    @jyotiprakashjangir8001@jyotiprakashjangir80013 жыл бұрын

  • Really cool 😎👍

    @BlackDogWoodwork@BlackDogWoodwork4 жыл бұрын

  • Wow that thing looks awesome

    @evanmccrindle5355@evanmccrindle53554 жыл бұрын

  • Amazing project, can't wait to give this a go

    @Brough_builds@Brough_builds4 жыл бұрын

  • Very, very cool. Another thing to add to my list of outstanding projects!

    @tacs_01@tacs_014 жыл бұрын

  • Cant wait to get a Kats-Moses apron as i start my woodworking career ! 🙂

    @woodpecked3D@woodpecked3D3 жыл бұрын

  • You never say impossible to creative people 😊👍🏼 and nice work to you 👏🏻😊

    @Kaakiaanaa.five.5@Kaakiaanaa.five.54 жыл бұрын

  • Amazing job making this table. Always a pleasure watching you work and learning how to make cool projects.

    @JkCanvas@JkCanvas3 жыл бұрын

  • Wow! It’s gorgeous!

    @andiejoy5295@andiejoy52954 жыл бұрын

  • Wow Jonathan, that's such an amazing piece. Love it.

    @rickcox6728@rickcox67284 жыл бұрын

  • It's a new year coming up and I look forward to making this. Thanks for the how to video!

    @timmartin6748@timmartin67484 ай бұрын

  • That was very cool. Great work on a beautiful table.

    @tim8468@tim84684 жыл бұрын

  • master piece

    @jabirhussain7307@jabirhussain73074 жыл бұрын

  • Your idea is very good

    @AsiaWoodworking@AsiaWoodworking8 ай бұрын

  • Really great design. Technical kowledges is an important thing, understanding what is a great design or not is even more important. Thank you to share both of them!

    @PostmanStudio@PostmanStudio4 жыл бұрын

  • Looks awesome once the finish is on and the joints show!

    @pettigrewwoodworks@pettigrewwoodworks4 жыл бұрын

  • I love the acrylic supports. They’re so discreet that I didn’t notice them without you pointing them out. And yet when you see them, they’re so nicely done that they’re a feature. 👍 awesome work overall 💖💖💖

    @evelyn_r@evelyn_r4 жыл бұрын

    • 100% Needs another 4 or 5 in the project to support heavy item on top.

      @whoDatBeDare@whoDatBeDare3 жыл бұрын

  • Amazing! One of these days!

    @danalaniz7314@danalaniz7314 Жыл бұрын

  • Great job!

    @user-dd5cv2bo1m@user-dd5cv2bo1m4 жыл бұрын

  • Oh my word!! This is amazing!! What a cool table!! I want one!!

    @hippoandbearmakes3416@hippoandbearmakes34164 жыл бұрын

  • Wow very cool.

    @JohnMadeit@JohnMadeit4 жыл бұрын

  • AMAZING WOW

    @yaya_smiley99@yaya_smiley994 жыл бұрын

  • Came out great! I built one out of Steel and used small bars to reinforce. I really like your idea for the cast acrylic to reinforce it but not be super noticeable!

    @ThrownSparksGarage@ThrownSparksGarage3 жыл бұрын

  • Adding this to my build list for sure. Two end tables and a coffee table to match. Excellent project!

    @billqqq@billqqq4 жыл бұрын

    • Send pics when you finish!

      @katzmosestools@katzmosestools4 жыл бұрын

    • Well, did you build that project?

      @Tinker1950@Tinker19505 ай бұрын

    • Shortly after, I had to pack up my shop and move, have been without my tools and shop ever since :(, but this is still on my project list. I hope to have my new shop built in the spring, we'll see...

      @billqqq@billqqq5 ай бұрын

    • @@billqqq I asked because whilst I think it's wonderful project, I also think it's a huge step for the average garage woodworker. Even a skilled Sketchup user would find this a challenge - jigs, bench mounted routers, router templates, glass to order and get correct. But, the result can be stunning. I really would love to be able to make something so good looking.

      @Tinker1950@Tinker19505 ай бұрын

  • Thank you for the plans.. this is awesome.

    @rcringwall@rcringwall4 жыл бұрын

  • That looks absolutely awesome! I’m going to have to have a go, though I think I’ll start with a cheap pine one before I waste my oak!!

    @daverobinson6384@daverobinson63844 жыл бұрын

  • I love Escher inspired designs and this one turned out awesome! Just imagining having to keep track of all those corners makes my head spin. Thanks for sharing!

    @sgsax@sgsax4 жыл бұрын

    • We had to stop and 3d print that cube because I was so stuck hahaha

      @katzmosestools@katzmosestools4 жыл бұрын

    • @@katzmosestools Yeah, I had to design in Sketchup Make.

      @whoDatBeDare@whoDatBeDare3 жыл бұрын

  • Wow! This thing is just amazing. I was looking for something great to make for a friend, and I think I've just found it!!

    @GeertEshuis@GeertEshuis4 жыл бұрын

  • Wow 😲 great 👍🏻

    @kswoodencrafting@kswoodencrafting4 жыл бұрын

  • Wow! Design and craftsmanship outstanding.

    @rons8900@rons89004 жыл бұрын

  • thank you Katz neat stuff

    @walterrider9600@walterrider96004 жыл бұрын

  • Really cool build! Sharing on The Awesomer.

    @theawesomer@theawesomer4 жыл бұрын

  • I made the frame today ! Glue & screws for me did the trick. Thanks for the idea & inspiration

    @edski24@edski244 жыл бұрын

  • Wow, I have to say... I WANT ONE! AND BAD! Supercool table! Kudos for doin this!

    @michael2305@michael23054 жыл бұрын

  • Very imaginative . Beautiful table.

    @anitakalgapurkar8025@anitakalgapurkar80254 жыл бұрын

  • Wow! This is great! I'm impressed!

    @craftbyhirotoyamazaki@craftbyhirotoyamazaki3 жыл бұрын

  • Unique design

    @bestironworks5438@bestironworks54383 жыл бұрын

  • Outstanding

    @keithspencersr.6806@keithspencersr.68064 жыл бұрын

  • Brilliant, another awesome project!!! Thank you for sharing!

    @Oscar-xj1xk@Oscar-xj1xk4 жыл бұрын

    • My pleasure bud! Thanks for watching!

      @katzmosestools@katzmosestools4 жыл бұрын

  • “ I wouldn’t sit on it”. That was great!!! That table is awesome!!!! Nice work!!

    @MrGrant440@MrGrant4404 жыл бұрын

  • Hi Jonathan, That has to one of the best projects I have ever seen built. Fantastic. Heading over for the "plans" Cheers, Huw

    @WoodenItBeNice@WoodenItBeNice4 жыл бұрын

  • YES! The Silicon Graphics (SGI) Logo. Awe, the Memories of my first Indigo and Octane.

    @kevinr6236@kevinr62364 жыл бұрын

    • I miss those machines... and that company!

      @DavidLindes@DavidLindes3 жыл бұрын

  • Mind blown, great job as always!

    @marcmedeiros8857@marcmedeiros88574 жыл бұрын

  • Sick table!! Love it! Can't wait to give it go

    @pacojerteunchingo@pacojerteunchingo4 жыл бұрын

  • GRANDIOSA, FELICITACIONES GRAN TUTORIAL

    @ipmtutos_oficial@ipmtutos_oficial3 жыл бұрын

  • Well that just kind of blew my mind. I had never seen much less heard of this “infinity cube” idea. Incredible table, it’s definitely a conversation piece for sure. Very cool.

    @scottsimpey2965@scottsimpey29654 жыл бұрын

    • Thanks my friend!

      @katzmosestools@katzmosestools4 жыл бұрын

  • What an incredible project!

    @bradmcnamar5679@bradmcnamar56793 жыл бұрын

  • Beautiful done thank you for sharing it with us.

    @ronjaybarnett@ronjaybarnett4 жыл бұрын

  • An amazing design. Would look cool with contrasting dowels through the bridal joints.

    @Andy_Panda@Andy_Panda4 жыл бұрын

  • Awesome video! Love the bridle joint jig.

    @aidanfordsword6954@aidanfordsword69544 жыл бұрын

    • I was pretty happy with that guy

      @katzmosestools@katzmosestools4 жыл бұрын

  • That's outstanding! Love the geometric look as well as the fit and finish!

    @paul-ld9vh@paul-ld9vh4 жыл бұрын

    • Thanks bud. This was a fun one!

      @katzmosestools@katzmosestools4 жыл бұрын

  • Now this is an amazing project!

    @IntoTheUnknowN-@IntoTheUnknowN-4 жыл бұрын

  • What a great idea for a table, this is really cool

    @HaveAnother2588@HaveAnother25884 жыл бұрын

  • Just beautiful!!

    @user-qg6fy4yp8t@user-qg6fy4yp8t4 жыл бұрын

  • Kopira caleta uaaaaa

    @srdjansavic400@srdjansavic4003 жыл бұрын

    • Ovo je prije 8 mjeseci

      @sergejvidovic6249@sergejvidovic62493 жыл бұрын
KZhead