KZhead
Ойын-сауық

AWESOME 3D PRINTED EXOSKELETON HANDS!!!

RCLifeOn
2018 ж. 20 Нау.
2 128 463 Рет қаралды
Жүктеу

Hey, just a friendly reminder to follow me, it's the best way to support my channel: / rclifeonsimon
I printed all the parts in blue, grey and black PLA filament and it held up surprisingly well! I would like to use nylon next time for long term toughness, but the performance was still smashing! I 3D printed almost all parts on the CR-10S which did a great job as always. For the assembly you are required 80 screws and 80 washers, I went with 2.5mm 12mm length screws with some M4 washers (4mm inner and 12mm outer) and that worked perfectly! All the parts popped in place, only minor sanding necessary, and the exoskeleton turned out looking madness! 3DPrintIt came up with a fantastic design and it even held up to some quite severe abuse. Smashing soda cans and even the 3D printed Terminator head, I only received scratches at the end of it.
THe CR-10 3D printer is $390 right now: goo.gl/bJFYTB
Exoskeleton STL files: www.thingiverse.com/thing:892654
3DPrintIt's KZhead channel: goo.gl/frqcEg
If you would like to get daily updates of my work you can check out my Patreon page: / rclifeon
Music:
Joakim Karud - No Worries (feat. Dyalla)
Dj Quads - Missing Someone
Veorra & The Tech Thieves - Ghost Town

Пікірлер

  • A full suite of this and I'll take over the world! 👊

    @RcLifeOn@RcLifeOn6 жыл бұрын

    • Rico Rodriguez! :-)

      @peerappel2012@peerappel20126 жыл бұрын

    • RCLifeOn i want buy this PLS

      @mortysmith91@mortysmith916 жыл бұрын

    • Do you get me project of this exoskeleton arms pls

      @mortysmith91@mortysmith916 жыл бұрын

    • You should use some gloves under the claws to protect yourself while you smash something.

      @rudoroid4922@rudoroid49226 жыл бұрын

    • Nice, you are a 3D printing god!

      @NoPro420@NoPro4206 жыл бұрын

  • *"I FELT ABSOLUTELY NOTHING!"* * starts bleeding *

    @squid9468@squid94685 жыл бұрын

    • haha

      @incessant7898@incessant78985 жыл бұрын

    • When bleeding use FLEXTAPE!

      @JohnJohn-yl4ko@JohnJohn-yl4ko5 жыл бұрын

    • the adrenaline helps deal with the pain

      @Sam-hv8zr@Sam-hv8zr5 жыл бұрын

    • XD

      @animationglows3961@animationglows39615 жыл бұрын

    • He should use gloves XD

      @l__-@l__-4 жыл бұрын

  • "These gloves are awesome I cant feel a thing!" 10 mins later... "911 what's your emergency?"

    @gaminggalore2621@gaminggalore26215 жыл бұрын

    • "I thought I was Luke Cage for a second with my exoskeleton glove and broke 4 fingers punching a can"

      @theschwiftyman8840@theschwiftyman88404 жыл бұрын

  • Him: “you need 80 screws, 80 washers” Me: “ew, work”

    @mopeadaz@mopeadaz4 жыл бұрын

    • MoPeaDaz k

      @w00t37@w00t374 жыл бұрын

    • w00t k

      @uranus7121@uranus71214 жыл бұрын

    • me a intellectual: AWESOME 3D PRINTED IN PLACE COMPLIANT ROBOTIC SKELETON HANDS

      @km5405@km54053 жыл бұрын

    • Same bro.

      @nateonate9695@nateonate96953 жыл бұрын

  • 9:30 "I may never take this off" that's a sign of him descending into madness

    @orangeflipgram6549@orangeflipgram65494 жыл бұрын

    • And reemerging as Wolverine.

      @burnerjack01@burnerjack013 жыл бұрын

    • Next thing you know he finds out it's an alien symbiote taking over his hands

      @auric326@auric3263 жыл бұрын

    • And he will become the dark lord of plastics

      @robbieaulia6462@robbieaulia64623 жыл бұрын

  • "I felt nothing".... takes glove off to reveal mangled hand :)

    @Pablo_Arnold@Pablo_Arnold6 жыл бұрын

    • so awesome that his hands arent bothered

      @AnityEx@AnityEx6 жыл бұрын

    • "I felt nothing, except the pain" is what he meant to say. Such surreal cold-bloodiness towards soda cans. Is he even a human?

      @tempname8263@tempname82636 жыл бұрын

    • The design is not for punching. It did not even have any protection to protect his hands.

      @edwardvinch4492@edwardvinch44926 жыл бұрын

    • Edward Vinch true he should add some padding for protection

      @Pablo_Arnold@Pablo_Arnold6 жыл бұрын

    • based on what the video showed of how the knuckles fit between the bars, I would assume that the shields (which he chose to leave off) would have mitigated some of the damage to his hands.

      @JasonSimpson1966@JasonSimpson19666 жыл бұрын

  • Imagine using these on a keyboard.

    @hugoolofsgard415@hugoolofsgard4154 жыл бұрын

    • ultimate keyboard slam

      @marleymacneil7966@marleymacneil79664 жыл бұрын

    • *clicking intensifies*

      @randomd2146@randomd21463 жыл бұрын

    • Yeah perfect for the people who dont think their mechanical keyboard dont sound enough!

      @mrgamerfly1@mrgamerfly13 жыл бұрын

    • @@mrgamerfly1 económics

      @randomd2146@randomd21463 жыл бұрын

    • @@randomd2146 haha i can hear it. Like a box of lego flying down the stairs🎉🤪

      @mrgamerfly1@mrgamerfly13 жыл бұрын

  • Bully: We fight tomorrow. Me: Edit: Why the hell did this get so many likes?!

    @theonewhoyearns4804@theonewhoyearns48044 жыл бұрын

    • @@MustardCrow yeah... wait, I COULD LEARN CODING TO DDOS MY BULLY *does nerd laugh*

      @theonewhoyearns4804@theonewhoyearns48044 жыл бұрын

    • honestly if a bully makes you wait to fight the next day he's a chicken. why wait till tomorrow? is he going home to grab a knife or psych himself up?

      @darkshadowsx5949@darkshadowsx59493 жыл бұрын

    • @@darkshadowsx5949 oh the guy deleted his commit but it was something about brusing I think

      @theonewhoyearns4804@theonewhoyearns48043 жыл бұрын

    • @cheggers! Damn you teenagers! If you had not intervened my plan would've worked!

      @theonewhoyearns4804@theonewhoyearns48043 жыл бұрын

    • *gets bulied even more for acting like an autistic anime character*

      @matijadurrigl4824@matijadurrigl48243 жыл бұрын

  • I felt nothing *Has a wound and its bleeding* Lol XD..

    @aenonace@aenonace5 жыл бұрын

    • Wounds don't always hurt

      @PanDiaxik@PanDiaxik4 жыл бұрын

  • And I thought wearing ten paper claws on my fingers was cool...

    @kylebenitez8926@kylebenitez89266 жыл бұрын

    • ^ Bugles

      @tastefullysinfull5570@tastefullysinfull55705 жыл бұрын

    • if you never did that in your childhood you probably never had one

      @missingno2401@missingno24015 жыл бұрын

    • I did that too!

      @mastadrakezasta2260@mastadrakezasta22605 жыл бұрын

    • Yup

      @animationglows3961@animationglows39615 жыл бұрын

    • @ITS YA BOI MIKE WAZOWSKI ive been c!awed at with those multiple times.

      @missingno2401@missingno24015 жыл бұрын

  • Now I'm curious if you add a little bit of padding to the places where it cut your hands if you could potentially reduce the damage you take and make the gloves more effective to use 🤔

    @zora_tech@zora_tech6 жыл бұрын

    • An easier option would be to put small padded gloves on, but either way this is so cool!

      @hnry841@hnry8415 жыл бұрын

    • I thought that as well

      @marsbase3729@marsbase37295 жыл бұрын

  • KZheadRS: before the video starts... ME: but the video already started!?!?

    @mysterygaming7112@mysterygaming71125 жыл бұрын

    • Mystery Gaming before the point of the video..

      @slowmotionbetterthannomotion.@slowmotionbetterthannomotion.4 жыл бұрын

    • @@slowmotionbetterthannomotion. but they didn't say that tho. Don't put words in their mouth

      @KL_VA@KL_VA4 жыл бұрын

  • These, but made of metal and with proper padding...

    @coyotedomino@coyotedomino5 жыл бұрын

    • That is exactly what I just have told my kid. It´s in our building list, right after his first forged tomahawk. Who is a great dad?

      @FBPrepping@FBPrepping3 жыл бұрын

    • @@FBPrepping Tony stark

      @bigmama5555@bigmama55553 жыл бұрын

  • Solid project! Must have taken a while to print all the parts, and good job assembling it, looked like some patience was required!

    @Nerdforge@Nerdforge6 жыл бұрын

  • Make a metal version. 👏😀

    @wuznab5109@wuznab51095 жыл бұрын

    • WuzNab YES

      @Momo-hu6cw@Momo-hu6cw4 жыл бұрын

    • YEAH SO DANGEROUS AND DUMB AND WHAT WHE GONNA DO WHITH THEM UH KIIIILLLLL PEOPLE KIDS:YAAAAAAAAY

      @elp4196@elp41964 жыл бұрын

    • elPG BG yaaaay! I genuinely would like to believe your joking, but the way you wrote this sounds like your being negative

      @braedoncottrell5389@braedoncottrell53894 жыл бұрын

    • Wait till he finds out about metal 3D printing

      @apersoneatingbread3981@apersoneatingbread39814 жыл бұрын

    • Guys i had fucking caps on im joking wtf is the Internet community

      @elp4196@elp41964 жыл бұрын

  • 9:23 - I can't feel anything ( starts bleeding)

    @neelkhandelwal5306@neelkhandelwal53065 жыл бұрын

  • so basically these are glorified knuckle dusters. Am i right?

    @ryanthompson8888@ryanthompson88883 жыл бұрын

  • These look like a LOT of fun to wear! I bet you still haven't taken them off :)

    @3DPrintingNerd@3DPrintingNerd6 жыл бұрын

    • Joel?!?!? What are you doing here? Awesome to see you enjoying other content!

      @nicquintana1092@nicquintana10926 жыл бұрын

    • Nic Quintana I love what Simon is doing!

      @3DPrintingNerd@3DPrintingNerd6 жыл бұрын

    • I'll sleep with them on tonight. Awesome to see you grow so quickly, you'll pass me in no time. 😱

      @RcLifeOn@RcLifeOn6 жыл бұрын

    • Joel, remember your can crusher thing? Put a beveled insert on this to punch your can crusher. Hahaha

      @woophereigo9755@woophereigo97556 жыл бұрын

    • You can use the power of the FullJoel to do crush things like that. ;)

      @code-grammardude5974@code-grammardude59746 жыл бұрын

  • This guy is literally the flushed emoji

    @YD_.@YD_.3 жыл бұрын

    • 😳

      @someup7786@someup77863 жыл бұрын

  • "Feel nothing" Hands are bleeding

    @lukemagdalin6169@lukemagdalin61694 жыл бұрын

    • Hahaha 🤣

      @javierquirozgalindo664@javierquirozgalindo6644 жыл бұрын

  • RIP Terminator

    @federicososabayer@federicososabayer6 жыл бұрын

    • Federico Sosa Bayer who’s terminator

      @spartangamer5850@spartangamer58506 жыл бұрын

    • No rip hands.

      @JD-ud9qt@JD-ud9qt6 жыл бұрын

    • Ya dude, that was a cool project, whats the point of destroying it?

      @memeherepancakes5203@memeherepancakes52035 жыл бұрын

    • Spartan Gamer a robot human

      @ajdickem@ajdickem5 жыл бұрын

    • @@spartangamer5850 ikr

      @rabiahmed9600@rabiahmed96005 жыл бұрын

  • I thought the blue/grey color combo looked good. but might be a different perspective on the other side of the camera.

    @RickRobotics@RickRobotics6 жыл бұрын

    • Exactly dude

      @KASK247@KASK2476 жыл бұрын

    • I personally would go with grey and black.

      @hnry841@hnry8415 жыл бұрын

    • +Exploding Hedgehog me dark lavender and light blueish green

      @Ommelanden@Ommelanden5 жыл бұрын

    • True. My 2 favorite colors are blue and black and gray is close to black

      @babettestruttmann2256@babettestruttmann22565 жыл бұрын

  • Welcome to the year of 2018 where 3d - printed things can be a dangerous weapon.

    @vii558@vii5585 жыл бұрын

  • Honestly I think the switch between filaments on the claws makes it look so much cooler!

    @Aluxious45@Aluxious455 жыл бұрын

  • Finally, I can make another step towards my goal of eventually becoming a robot.

    @tombuck@tombuck6 жыл бұрын

    • Siggesatan thank you for this as I genuinely enjoy learning more about robots. When saying I wanted to become one, it was more about bypassing the medical industry and having easy repair. Total domination of the human race would be a happy side benefit.

      @tombuck@tombuck6 жыл бұрын

    • lol.

      @thrynn2914@thrynn29146 жыл бұрын

    • You mean android

      @jerrywtfidonthavealastname9297@jerrywtfidonthavealastname92975 жыл бұрын

    • Siggesatan yet I got in 🧐

      @cheeselord8153@cheeselord81535 жыл бұрын

  • I've got bad day today, but your videos everytime make me happy ;) thanks!

    @tomasvotrel5461@tomasvotrel54616 жыл бұрын

    • Tomáš Votřel konečně nějakej čech

      @ondrejpilc4647@ondrejpilc46476 жыл бұрын

    • Jo, taky jsem zatím žádnýho nepotkal :D videa se mi dost líbí, má podobný koníčky, a umí to všechno skvěle natočit, jeho videotvorba je pořád lepší a lepší

      @tomasvotrel5461@tomasvotrel54616 жыл бұрын

    • I sure meant it :D

      @tomasvotrel5461@tomasvotrel54616 жыл бұрын

  • I’ve never seen anything as satisfying as that printing time-lapse xD

    @SOSYML@SOSYML5 жыл бұрын

  • I've watched a lot of your videos but I love you for this one :) especially the beating the terminator part you rock man stay at it

    @cordovastyle3@cordovastyle34 жыл бұрын

  • Those turned out amazing buddy! Great build! I can’t believe you killed your Terminator head! LoL

    @NP3D@NP3D6 жыл бұрын

    • I know right

      @samajestewart6289@samajestewart62896 жыл бұрын

    • Napier Photography In 3D are you from Napier

      @carolenevanjaarsveld389@carolenevanjaarsveld3896 жыл бұрын

    • Don't call people "buddy" it's rude.

      @dumbr2098@dumbr20986 жыл бұрын

    • Ofbasecfin my apologies but where I’m from the term Buddy is usually not taken as rude unless the comment was rude and is followed by the word “Buddy.” No rudeness was intended.

      @NP3D@NP3D6 жыл бұрын

    • Ofbasecfin I guess the word is Sweden would be “Kompis” ? I am not sure but no offense intended.

      @NP3D@NP3D6 жыл бұрын

  • Wear a set of thin leather glove liners and then you'd be fine against all damage

    @Jonj57@Jonj576 жыл бұрын

    • I think the plastic protectors were for the hands more than hiding the joints

      @atroxit8166@atroxit81666 жыл бұрын

    • Atroxit nope they are for looks

      @unfunny2258@unfunny22586 жыл бұрын

    • Hey, let's test that. Jimmy, go get that AK-47!

      @TheyTookStrawb@TheyTookStrawb6 жыл бұрын

    • Yes, leather gloves with metallic knuckles would work best for smashing cans

      @TheTboy007@TheTboy0075 жыл бұрын

  • 0:49 legit looks like morgs

    @editshaunted2618@editshaunted26183 жыл бұрын

  • I am liking and subscribing to you because of your efforts, you were confident even when you are bleeding. Keep it up bro

    @saisowjith2073@saisowjith20733 жыл бұрын

  • *Breaks finger* "I felt absolutely nothing."

    @coochiekatana3471@coochiekatana34716 жыл бұрын

  • Those claws would be good head and back scratchers :D

    @aurimasknieza7320@aurimasknieza73206 жыл бұрын

  • Swedish people back then:literally vikings Swedish people now: "I got so excited I got a nosebleed"

    @karlisposums6870@karlisposums68704 жыл бұрын

  • These look soooo Awesome Great work man! Keep it up!

    @saadamjad7641@saadamjad76415 жыл бұрын

  • Noooooooo the Terminator! Awesome project though. Maybe pair the exoskeleton hands with some flexible filament gloves so your hands don't get beat up (and in a dark color it could look pretty sick)

    @GameWorkflow@GameWorkflow6 жыл бұрын

  • I WAS WAITING FOR SOMEONE TO DO THIS

    @angelacuna9884@angelacuna98846 жыл бұрын

    • WTH is that profile pic!?!

      @scxlez@scxlez6 жыл бұрын

    • is that shrek mixed with female barry?

      @fleshyindividual3220@fleshyindividual32206 жыл бұрын

  • Those are a lot more durable than I thought these would be.

    @dannyp204@dannyp2046 жыл бұрын

  • Gloves look sick and fun as hell

    @Donovarcotfw@Donovarcotfw5 жыл бұрын

  • Sooo cool love your channel

    @colinnewshamnewshamproduct7856@colinnewshamnewshamproduct78566 жыл бұрын

  • 8:09 “I felt absolutely nothing” 9:23 shows bleeding hand

    @ilikedoingthings2979@ilikedoingthings29794 жыл бұрын

  • No pain, no gain. It's an awesome project. I'd love to have it.

    @gumissura@gumissura5 жыл бұрын

  • Now *THIS* is how to crack open a cold one with the boys.

    @eggroll3055@eggroll30556 жыл бұрын

  • I personally love the gray and blue. anyone else with me

    @aahhhhhhhhhh@aahhhhhhhhhh3 жыл бұрын

  • Nice. I like to see an filament extruder to make 3d printer filament out of schredded bottle caps. Sorry for bad English

    @lennybruder2153@lennybruder21536 жыл бұрын

    • David thanks, I also recycle Bottle caps (for 3D printing filament), but I like to see RCLiveOn's Videos, and why dont ask for an Content.

      @lennybruder2153@lennybruder21536 жыл бұрын

  • Time to add haptics to it and it becomes a VR controller

    @alexderpyracc4053@alexderpyracc40534 жыл бұрын

  • as soon as i get my first 3d printer this is gonna be my first major project. this looks sick!

    @Acenthus@Acenthus3 жыл бұрын

  • Mom: "hey do you want some......" RC: *punching the cans*

    @timeeggroll@timeeggroll5 жыл бұрын

  • rip fingers. re7 references are super awesome.

    @BerryGritador@BerryGritador6 жыл бұрын

    • Berry Pudim ikr There awesomer than "a good camera man like you" ((tape reference ))

      @Craisjbx@Craisjbx6 жыл бұрын

  • I watch this exactly 2 years after it was uploaded

    @daannys1981@daannys19814 жыл бұрын

  • Helluva recovery when you ran out of filament, there. I've never seen that trick before.

    @the_wretched@the_wretched2 жыл бұрын

  • Middle school paper claws v 2.0

    @unanimated7084@unanimated70845 жыл бұрын

  • Print a 1:1 hand to put this prop on it, like a display

    @patrickazonzo@patrickazonzo6 жыл бұрын

  • that is so cool keep up the good work it looks awesome

    @3kingsofegypt957@3kingsofegypt9573 жыл бұрын

  • A year from now this guy is climbing across buildings in New York in a full suit

    @bBearyWhite@bBearyWhite5 жыл бұрын

  • See you at 3dmeetup sweden

    @michaelwerth@michaelwerth6 жыл бұрын

  • You could totally send those files out and get them 3d printed in metal like EvanandKatelyn did during their colab with Alec Steele

    @kentclark9908@kentclark99086 жыл бұрын

    • That would cost a shit ton though

      @GregMakesStuff@GregMakesStuff5 жыл бұрын

  • Dang hands on top of hands! Now that’s a life changing thing.

    @soviet3380@soviet33805 жыл бұрын

  • Legend has it he’s still wearing those gloves

    @wish2die327@wish2die3275 жыл бұрын

  • love you

    @Killerdog200@Killerdog2006 жыл бұрын

  • gj man

    @MementoNeli@MementoNeli6 жыл бұрын

  • Awesome print dude!

    @DarkusObscurius@DarkusObscurius6 жыл бұрын

  • what layer hight do you mostly use? i use 0.20-0.16 on cr-10s and 0.12-0.08 for very detailed small prints. also, for solid parts, do u recomend 0.8 wall and 100 infill or 3 wall and 0 infill?

    @jvinsnes@jvinsnes5 жыл бұрын

  • How are you making these things and forget kenetic energy would have hurt you anyway?

    @eyemaster8687@eyemaster86873 жыл бұрын

  • Its not 3:28am you can see out the window lol 😂

    @hazzamazzard5348@hazzamazzard53486 жыл бұрын

    • You got me! 😅

      @RcLifeOn@RcLifeOn6 жыл бұрын

    • RCLifeOn OMG your amazing

      @hazzamazzard5348@hazzamazzard53486 жыл бұрын

    • RCLifeOn I’m such a big fan because of you I have my own 3D printer but it broke and I’m trying to fix it it’s the anet a8

      @hazzamazzard5348@hazzamazzard53486 жыл бұрын

    • If you need help with that i may have you covered

      @calebs.8776@calebs.87766 жыл бұрын

    • Hazza Mazzard - I purchased two Anet A8's as my first printer, two because of what I had read of some of the issues surrounding the A8. And there are a lot of issues to contend with from my experience. Of single most concern for me was that the smooth rods varied in diameter along their length by as much as 0.28 mm. I ultimately built a CoreXY machine with the parts, replacing the smooth rods with true 8mm smooth rods and adding a V6 hot end with a bowden extruder.

      @JasonSimpson1966@JasonSimpson19666 жыл бұрын

  • Becoming a cyborg made you a maniac.

    @millersethe@millersethe5 жыл бұрын

  • Remember Terminator? This is him now. Feel old yet?

    @bjrnfrederiksen6319@bjrnfrederiksen63196 жыл бұрын

  • I would use protective gloves under these and over them

    @crystalclearchaos5387@crystalclearchaos53875 жыл бұрын

  • 蜘蛛のような関節の動き方ですね

    @user-sk6em3ej2k@user-sk6em3ej2k5 жыл бұрын

  • If you can make an entire suit or armor you will be invincible

    @johnnyfung7143@johnnyfung71433 жыл бұрын

  • Neue Erfindungen und dazu DIESE Hintergrundmusic, perfect😎

    @whatisthat1579@whatisthat15795 жыл бұрын

  • メタリックにしたら絶対かっこいいな

    @-officialchannel2060@-officialchannel20605 жыл бұрын

    • 公式はそんなアイコンにしません

      @user-dg6nd9st6s@user-dg6nd9st6s5 жыл бұрын

  • 何かわからぬがすごいな

    @user-sk7yy1bc5k@user-sk7yy1bc5k5 жыл бұрын

  • watched this entire video, but the best part for me was seeing that InWin case, have the exact same one with teal LED EVERYWHERE! Crazy awesome project regardless!

    @OfficialRandomGaming@OfficialRandomGaming5 жыл бұрын

  • "I felt absolutely nothing!" *takes off gloves, knuckles bleeding*

    @entity1566@entity15665 жыл бұрын

  • いやこれ付けてもケガしとるんかいw

    @user-ob7qo6xn7u@user-ob7qo6xn7u5 жыл бұрын

    • 脱毛ふんどし 外国人兄貴かっこいい

      @user-zg6vc3hi5m@user-zg6vc3hi5m5 жыл бұрын

  • i have ideas on how to improve this. . . . many ideas (cue maniacal laughter)

    @endoflame3874@endoflame38745 жыл бұрын

    • MUHAHAAHAHAHAHAHAHAHAHAHAAHAH

      @bananatorpedo275@bananatorpedo2755 жыл бұрын

  • congrats on 300k

    @lu1z825@lu1z8255 жыл бұрын

  • Those would look amazing in Purple and gold

    @Smoses_senpai@Smoses_senpai3 жыл бұрын

  • You have such a weak and slow punch. Until you starting going full on with that skull

    @jesse-dg8yx@jesse-dg8yx6 жыл бұрын

  • Is that how an exoskeleton is supposed to work?🤔

    @AbeTheRock@AbeTheRock6 жыл бұрын

    • Abe The Rock no its not...

      @jeremyresch2631@jeremyresch26316 жыл бұрын

    • just a fancy glove if anything, good for digging atleast?

      @MrDisgruntledGamer1@MrDisgruntledGamer16 жыл бұрын

    • Exoskeleton: a rigid external covering for the body in some invertebrate animals, especially arthropods, providing both support and protection. So...yes...that is how it is supposed to work. It's a rigid external covering that provides both support and protection...

      @invictuspotens9672@invictuspotens96726 жыл бұрын

    • Pretty much although this is not a powered exoskeleton. Seems like it wouldn't be too hard to upgrade to a powered version though. Just a few gears, a handful of stepper motors, and some jointed drive shafts.

      @dustinbrueggemann1875@dustinbrueggemann18756 жыл бұрын

    • Wined and Dined they do provide protection tho?

      @Swigalig@Swigalig5 жыл бұрын

  • you don't have to be drunk to enjoy these, but it helps.

    @haruruben@haruruben5 жыл бұрын

  • I just discovered this channel and it's awesome. Thank you very much for your work, it's amazing to see how you transmit that illusion for design and 3D printing. Folks, could you solve a doubt?? Which 3D printer does RCLifeOn use? Could it be an Ender 3 or an Ender 3 PRO? I don't think it's a creality cr10s.

    @borjaraulbravo3042@borjaraulbravo30425 жыл бұрын

  • 洋画の悪役が、持ってそうなやつ

    @user-he1de5wd8h@user-he1de5wd8h5 жыл бұрын

  • F in the chat for Larry the skeleton

    @eddie1421@eddie14214 жыл бұрын

    • Eddie Castro dead meme

      @huntermiller9287@huntermiller92874 жыл бұрын

  • Your Passion is contagious

    @LonganLee@LonganLee4 жыл бұрын

  • Very cool and it deserves a subscribe which i just did, you are a genius and i think you must make the whole suit, good luck 👍👍👍👍

    @jaddaher3823@jaddaher38235 жыл бұрын

  • *Mendebur Lemur* dan gelenler 1+

    @altayallahverdiyev374@altayallahverdiyev3745 жыл бұрын

    • Ben

      @emrekaplan7507@emrekaplan75075 жыл бұрын

    • Ben

      @amacsizoyuncu8287@amacsizoyuncu82875 жыл бұрын

    • Ben

      @chigola1657@chigola16575 жыл бұрын

    • Ben

      @christopyper1287@christopyper12874 жыл бұрын

  • Now test the claws and really put the fists to its paces and punch a wall with them

    @lieffian@lieffian4 жыл бұрын

  • Imagine going to a boxing match with these.

    @42_ostriches@42_ostriches3 жыл бұрын

  • : O He's out of control! I wonder if those would be considered a weapon in most places.

    @CoxJoxSox@CoxJoxSox5 жыл бұрын

  • 3:28 AM? There's light coming in through your window. So...?

    @RichardLucas@RichardLucas5 жыл бұрын

  • 怪我してるんかーい

    @user-dx6tz5jw5y@user-dx6tz5jw5y5 жыл бұрын

  • Awesome i definetly want a pair too

    @nordicphyromaniac@nordicphyromaniac5 жыл бұрын

  • You are a true artist :)

    @dandare2586@dandare25864 жыл бұрын

  • 爪取るやつかと思った 日本人いますか？

    @user-du5pq9tn7c@user-du5pq9tn7c5 жыл бұрын

    • いえーい

      @user-og3nk9dx7g@user-og3nk9dx7g5 жыл бұрын

  • Great for furrys. You know claws I tried

    @calebhickey9344@calebhickey93445 жыл бұрын

  • when you said lets destroy some stuff i thought you were joking! but nooooooo! so cool!

    @JaxonJJB@JaxonJJB6 жыл бұрын

  • Your hands are amazing

    @leevitikkanen2434@leevitikkanen24343 жыл бұрын
KZhead